From 1ff2b274a7558f8787e23ef838e49559b0630e4b Mon Sep 17 00:00:00 2001 From: sh123 Date: Sun, 6 Dec 2020 12:06:43 +0200 Subject: [PATCH] Update README.md --- README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/README.md b/README.md index bccfdfd..9c4c6d0 100644 --- a/README.md +++ b/README.md @@ -10,8 +10,8 @@ Can be used in several modes: - **APRS-IS to RF gating**, it is possible to enable it together with the filter in the config, so APRS-IS data will be forwarded to RF - **RF digirepating** for `WIDEn-n` new style paths - **Beaconing**, own station periodic beacon announcement to APRS-IS and RF -- **LoRa Codec2 digital voice communication backend*** - - just install https://github.com/sh123/codec2_talkie on you Android phone, pair with the modem and you can communicate by using digital voice Codec2 +- **LoRa Codec2 digital voice communication modem*** + - just install https://github.com/sh123/codec2_talkie on you Android phone, pair with the modem and you can communicate with each other by using digital voice Codec2 # Compatible Boards All work was done on ESP32-WROOM with custom made LoRa shield, if your ESP32 board is compatible then it should work, but there might be need to redefine pinouts to LoRa module if it differs (see further description in Software Setup section), currently pinouts are connected from LoRa to ESP32-WROOM as (SS/RST/DIO0 could be redefined in loraprs_service.h):