mirror
/
esp32_loraprs
kopia lustrzana https://github.com/sh123/esp32_loraprs
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

pull/15/head
sh123 2020-06-17 22:54:37 +03:00 zatwierdzone przez GitHub
rodzic c20f5d5c51
commit 172f5ab9e2
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 1 dodań i 1 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

2
README.md
Wyświetl plik

@ -38,7 +38,7 @@ All work was done on ESP32-WROOM with custom made LoRa shield, if your ESP32 boa
- lora module SS, **CfgPinSs**, GPIO_5
- lora module RST, **CfgPinRst**, GPIO_26
- lora module DIO0, **CfgPinDio0**, GPIO_14
- if you are planning to experiment with different bandwidths/spread factors then modify values in `initializeConfig()`, with current parameters APRS packet time on air is around **1-2 seconds** at 292bps, to decode with as lower level as possible with reasonable speed comparable to 300bps HF APRS, use https://github.com/tanupoo/lorawan_toa to make calculations
- if you are planning to experiment with different bandwidths/spread factors then modify values in `initializeConfig()`, with current parameters APRS packet time on air is around **1-2 seconds** @ 292bps/36Bps, to decode with as lower level as possible with reasonable speed (comparable to 300bps HF APRS), use https://github.com/tanupoo/lorawan_toa to make further calculations
- lora bandwidth `cfg.LoraBw`, 125 kHz (also tested with 20.6 KHz and SF9 with frequency correction)
- lora spread factor `cfg.LoraSf`, 12 (should decode down to -20dB, choosen with the goal for minimum signal decode)
- lora coding rate `cfg.LoraCodingRate`, 7