mirror
/
esp32-ogn-tracker
kopia lustrzana https://github.com/pjalocha/esp32-ogn-tracker
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność

Update README.md

pull/30/head
Paweł Jałocha 2020-11-28 23:50:31 +00:00 zatwierdzone przez GitHub
rodzic e6df53a256
commit eb6a1669e2
Nie znaleziono w bazie danych klucza dla tego podpisu
ID klucza GPG: 4AEE18F83AFDEB23
1 zmienionych plików z 7 dodań i 1 usunięć
Pokaż statystyki Ściągnij plik aktualizacji Ściągnij plik porównania Expand all files Collapse all files

8
README.md
Wyświetl plik

@ -18,6 +18,8 @@ The intention is to use TheThingsNetwork and it is arranged already that packets
To use this feature you need to register your OGN-Tracker with the TTN and "ogn" application, thus you need to send to us your 64-bit CPU ID and we will register the device and send you back the application key which needs to be written into the OGN-Tracker.
Note: LoRaWAN GPS trackers using the Cayenne Low Power Payload (LPP) can now be connected to our TTN application, and the position report would be merged into the OGN APRS stream. Conect us for AppEUI and AppKey to use for configuring the device.
### IGC files recorded on the SD card
For OGN-Trackers with SD card connected, IGC files are recorded., as well as internal log files are copied over to the SD card in order not to be lost when newer files overwrite them.
@ -30,7 +32,8 @@ Note the the ESP32 takes about 80mA more when the Wi-Fi AP is enabled thus total
### Stratux-EU connectivity
When compiled with WITH_STRATUX, WITH_WIFI and WITH_HTTP the OGN-Tracker can serve as source of GPS and pressure data (if pressure module present) to the Stratux. THe OGN-Tracker connects to Wi-Fi access point created by Stratux Raspberry PI and send GPS and pressure data to port 30000.
When compiled with WITH_STRATUX, WITH_WIFI and WITH_HTTP the OGN-Tracker can serve as source of GPS and pressure data (if pressure module present) to the Stratux. The OGN-Tracker connects to Wi-Fi access point created by Stratux Raspberry PI and send GPS and pressure data to port 30000.
Once the OGN-Tracker is connected to Stratux, it is possible to connect to its HTTP interface to access status, setup and log files.
## To compile the code and flash the ESP32 module: install the ESP-IDF
@ -184,6 +187,9 @@ $POGNS,Pilot=John
the parameter value changes and all parameters are writen to internal flash thus they are preserved across system restart or repower.
To list all parameters with their values send Ctrl-C (software and hardware handshake must be OFF).
Note: more recently, the internal log files can be accessed through the WiFi Access Point and HTTP interface.
The drawback is higher power consumption due to WiFi.
## BT interface
OGN-Tracker can be connected via Bluetooth from Android devices. The BT port is like a serial port and carriers the same data as the USB serial port.