kopia lustrzana https://github.com/pjalocha/esp32-ogn-tracker
Correct markup
rodzic
79f8e58659
commit
b45a2a6a98
|
@ -8,13 +8,13 @@ If you need to change the pins assigned to various periferials, see the top of t
|
||||||
To compile and upload use the standard ESP32 toolchain and esp-idf
|
To compile and upload use the standard ESP32 toolchain and esp-idf
|
||||||
|
|
||||||
To wire the UART GPS follow the pins defined in the hal.cpp
|
To wire the UART GPS follow the pins defined in the hal.cpp
|
||||||
|
```
|
||||||
// wire colours for VK2828U GPS
|
// wire colours for VK2828U GPS
|
||||||
#define PIN_GPS_TXD GPIO_NUM_12 // green
|
#define PIN_GPS_TXD GPIO_NUM_12 // green
|
||||||
#define PIN_GPS_RXD GPIO_NUM_35 // blue
|
#define PIN_GPS_RXD GPIO_NUM_35 // blue
|
||||||
#define PIN_GPS_PPS GPIO_NUM_34 // white
|
#define PIN_GPS_PPS GPIO_NUM_34 // white
|
||||||
#define PIN_GPS_ENA GPIO_NUM_13 // yellow -> well, I had a problem here, thus I tied the enable wire to 3.3V for the time being.
|
#define PIN_GPS_ENA GPIO_NUM_13 // yellow -> well, I had a problem here, thus I tied the enable wire to 3.3V for the time being.
|
||||||
|
```
|
||||||
Note the yellow wire: put it to 3.3V to start with.
|
Note the yellow wire: put it to 3.3V to start with.
|
||||||
An attempt to control it from the CPU did not work, to be followed.
|
An attempt to control it from the CPU did not work, to be followed.
|
||||||
|
|
||||||
|
|
Ładowanie…
Reference in New Issue