esp-idf/tools/esp_prov

ESP Provisioning Tool

Description

esp_prov - A python-based utility for testing the provisioning examples over a host machine.

Usage of esp-prov assumes that the provisioning app has specific protocomm endpoints active. These endpoints are active in the provisioning examples and accept specific protobuf data structure:

Endpoint Name	URI (HTTP server on ip:port)	Description
prov-session	http://ip:port/prov-session	Security endpoint used for session establishment
prov-config	http://ip:port/prov-config	Endpoint used for configuring Wi-Fi credentials on device
proto-ver	http://ip:port/proto-ver	Version endpoint for checking protocol compatibility
prov-scan	http://ip:port/prov-scan	Endpoint used for scanning Wi-Fi APs
prov-ctrl	http://ip:port/prov-ctrl	Endpoint used for controlling Wi-Fi provisioning state
custom-data	http://ip:port/custom-data	Optional endpoint for sending custom data (refer wifi_prov_mgr example)

Usage

python esp_prov.py --transport < mode of provisioning : softap \ ble \ console > [ Optional parameters... ]

Parameters

• --help Print the list of options along with brief descriptions

• --verbose, -v Sets the verbosity level of output log

• --transport <mode>

  • Three options are available:
    • softap - for SoftAP + HTTPD based provisioning
      • Requires the device to be running in Wi-Fi SoftAP mode and hosting an HTTP server supporting specific endpoint URIs
      • The client needs to be connected to the device softAP network before running the esp_prov tool.
    • ble - for BLE based provisioning
      • Supports Linux, Windows and macOS; redirected to console if dependencies are not met
      • Assumes that the provisioning endpoints are active on the device with specific BLE service UUIDs
    • console - for debugging via console-based provisioning
      • The client->device commands are printed to STDOUT and device->client messages are accepted via STDIN.
      • This is to be used when the device is accepting provisioning commands on UART console.

• --service_name <name> (Optional)

  • When transport mode is ble, this specifies the BLE device name to which connection is to be established for provisioned. If not provided, BLE scanning is initiated and a list of nearby devices, as seen by the host, is displayed, of which the target device can be chosen.
  • When transport mode is softap, this specifies the HTTP server hostname / IP which is running the provisioning service, on the SoftAP network of the device which is to be provisioned. This defaults to 192.168.4.1:80 if not specified

• --ssid <AP SSID> (Optional)

  • For specifying the SSID of the Wi-Fi AP to which the device is to connect after provisioning.
  • If not provided, scanning is initiated and scan results, as seen by the device, are displayed, of which an SSID can be picked and the corresponding password specified.

• --passphrase <AP Password> (Optional)

  • For specifying the password of the Wi-Fi AP to which the device is to connect after provisioning.
  • Only used when corresponding SSID is provided using the --ssid option

• --sec_ver <Security version number>

  • For specifying the version of protocomm endpoint security to use. Following 3 versions are supported:
    • 0 for protocomm_security0 - No security
    • 1 for protocomm_security1 - X25519 key exchange + Authentication using Proof of Possession (PoP) + AES-CTR encryption
    • 2 for protocomm_security2 - Secure Remote Password protocol (SRP6a) + AES-GCM encryption

• --pop <Proof of possession string> (Optional)

  • For specifying optional Proof of Possession string to use for protocomm endpoint security version 1
  • Ignored when other security versions are used

• --sec2_username <SRP6a Username> (Optional)

  • For specifying optional username to use for protocomm endpoint security version 2
  • Ignored when other security versions are used

• --sec2_pwd <SRP6a Password> (Optional)

  • For specifying optional password to use for protocomm endpoint security version 2
  • Ignored when other security versions are used

• --sec2_gen_cred (Optional)

  • For generating the SRP6a credentials (salt and verifier) from the provided username and password for protocomm endpoint security version 2
  • Ignored when other security versions are used

• --sec2_salt_len <SRP6a Salt Length> (Optional)

  • For specifying the optional SRP6a salt length to be used for generating protocomm endpoint security version 2 credentials
  • Ignored when other security versions are used and the ``--sec2_gen_cred` option is not set

• --reset (Optional)

  • Resets internal state machine of the device and clears provisioned credentials; to be used only in case of provisioning failures

• --reprov (Optional)

  • Resets internal state machine of the device and clears provisioned credentials; to be used only in case the device is to be provisioned again for new credentials after a previous successful provisioning

• --custom_data <some string> (Optional) An information string can be sent to the custom-data endpoint during provisioning using this argument. (Assumes the provisioning app has an endpoint called custom-data - see provisioning/wifi_prov_mgr example for implementation details).

Example Usage

Please refer to the README.md file with the wifi_prov_mgr example present under $IDF_PATH/examples/provisioning/.

This example uses specific options of the esp_prov tool and gives an overview of simple as well as advanced usage scenarios.

Availability

For Android, a provisioning tool along with source code is available here.

Dependencies

This requires the following python libraries to run:

• bleak
• future
• protobuf
• cryptography

To install the dependency packages needed, please run the following command:

bash install.sh --enable-ttfw

Note: For troubleshooting errors with BLE transport, please refer this link.