Historia

pedro.minatel da471dfcd1 Examples README's updated on peripherals, system and wifi Updated main examples README to add missing examples folders and Getting Started links Updated wifi/fastscan example README Updated wifi examples README Updated wifi main examples README Added instructions and removed obviousness from examples README Updates on example README in peripherals, system and wifi Updates on example README in peripherals and added wave form pictures on wave_gen example Updates and review on example README Revision on unit style convention Added the getting started link for each supported version Readme review and recommended enhancements Added the default note on the wave form option info Added the ESP32-C3 support information on the temperature sensor example README Added Getting Started information for ESP32-S2 and ESP32-C3 Issue fixed on the supported target on README Resolved merge conflict		2021-04-07 14:24:38 +00:00
..
main	rmt: add musical buzzer example	2021-01-14 21:32:49 +08:00
CMakeLists.txt	rmt: refactor examples	2019-11-20 10:54:21 +08:00
Makefile	Whitespace: Automated whitespace fixes (large commit)	2020-11-11 07:36:35 +00:00
README.md	Examples README's updated on peripherals, system and wifi	2021-04-07 14:24:38 +00:00

README.md

RMT Transmit Example -- Morse Code

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example mainly illustrates how to transmit the Morse code using the RMT driver.

How to Use Example

Hardware Required

A development board with ESP32 SoC (e.g., ESP32-DevKitC, ESP-WROVER-KIT, etc.)
A USB cable for Power supply and programming
A LED, a speaker or an earphone

Connection :

             330R            LED     
GPIO18 +----/\/\/\----+------|>|-----+ GND
                      |    
                      | /|
                     +-+ |   Speaker
                     | | |     or
                     +-+ |  earphone
                      | \|
                      |
                      +--------------+ GND

Configure the Project

Open the project configuration menu (idf.py menuconfig).

In the Example Configuration menu:

Set the GPIO number used for transmitting the IR signal under RMT TX GPIO optin.

Build and Flash

Run idf.py -p PORT flash monitor to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.

Example Output

To be able to see and hear the message output by the RMT, connect an LED and a speaker or an earphone (be careful it might make a large noise) to the GPIO you set in the menuconfig.

Run the example, you will see the following output log:

...
I (304) example: Configuring transmitter
I (2814) example: Transmission complete
...

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.