kopia lustrzana https://github.com/espressif/esp-idf
337 wiersze
11 KiB
C
337 wiersze
11 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <fcntl.h>
|
|
#include <sys/termios.h>
|
|
#include <sys/errno.h>
|
|
#include "unity.h"
|
|
#include "esp_rom_uart.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/semphr.h"
|
|
#include "driver/uart.h"
|
|
#include "soc/uart_struct.h"
|
|
#include "esp_vfs_dev.h"
|
|
#include "esp_vfs.h"
|
|
#include "sdkconfig.h"
|
|
|
|
static void fwrite_str_loopback(const char* str, size_t size)
|
|
{
|
|
esp_rom_uart_tx_wait_idle(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
UART0.conf0.loopback = 1;
|
|
fwrite(str, 1, size, stdout);
|
|
fflush(stdout);
|
|
esp_rom_uart_tx_wait_idle(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
vTaskDelay(2 / portTICK_PERIOD_MS);
|
|
UART0.conf0.loopback = 0;
|
|
}
|
|
|
|
static void flush_stdin_stdout(void)
|
|
{
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
char bitbucket[UART_FIFO_LEN];
|
|
while (fread(bitbucket, 1, UART_FIFO_LEN, stdin) > 0) {
|
|
;
|
|
}
|
|
fflush(stdout);
|
|
esp_rom_uart_tx_wait_idle(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
}
|
|
|
|
TEST_CASE("can read from stdin", "[vfs]")
|
|
{
|
|
flush_stdin_stdout();
|
|
|
|
const size_t count = 12;
|
|
srand(count);
|
|
char* data = (char*) calloc(1, count * 8 + 2);
|
|
char* buf = (char*) calloc(1, count * 8 + 2);
|
|
char* p = data;
|
|
for (size_t i = 0; i < count; ++i) {
|
|
p += sprintf(p, "%08x", rand());
|
|
}
|
|
p += sprintf(p, "\n");
|
|
size_t len = p - data;
|
|
fwrite_str_loopback(data, len);
|
|
size_t cb = fread(buf, 1, len, stdin);
|
|
TEST_ASSERT_EQUAL(len, cb);
|
|
TEST_ASSERT_EQUAL_UINT8_ARRAY(data, buf, len);
|
|
|
|
free(data);
|
|
free(buf);
|
|
}
|
|
|
|
|
|
TEST_CASE("CRs are removed from the stdin correctly", "[vfs]")
|
|
{
|
|
esp_vfs_dev_uart_port_set_rx_line_endings(CONFIG_ESP_CONSOLE_UART_NUM, ESP_LINE_ENDINGS_CRLF);
|
|
esp_vfs_dev_uart_port_set_tx_line_endings(CONFIG_ESP_CONSOLE_UART_NUM, ESP_LINE_ENDINGS_CRLF);
|
|
|
|
flush_stdin_stdout();
|
|
const char* send_str = "1234567890\n\r123\r\n4\n";
|
|
/* with CONFIG_NEWLIB_STDOUT_ADDCR, the following will be sent on the wire.
|
|
* (last character of each part is marked with a hat)
|
|
*
|
|
* 1234567890\r\n\r123\r\r\n4\r\n
|
|
* ^ ^^ ^
|
|
*/
|
|
char buf[128];
|
|
char* dst = buf;
|
|
|
|
fwrite_str_loopback(send_str, 11); // send up to the first \n
|
|
size_t rb = fread(dst, 1, 5, stdin); // read first 5
|
|
TEST_ASSERT_EQUAL(5, rb);
|
|
dst += rb;
|
|
|
|
rb = fread(dst, 1, 6, stdin); // ask for 6
|
|
TEST_ASSERT_EQUAL(6, rb); // get 6
|
|
|
|
TEST_ASSERT_EQUAL_UINT8_ARRAY("1234567890\n", buf, 11);
|
|
dst += rb;
|
|
|
|
rb = fread(dst, 1, 2, stdin); // any more characters?
|
|
TEST_ASSERT_EQUAL(0, rb); // nothing
|
|
|
|
fwrite_str_loopback(send_str + 11, 1); // send the '\r'
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
|
|
rb = fread(dst, 1, 2, stdin); // try to get somthing
|
|
TEST_ASSERT_EQUAL(0, rb); // still nothing (\r is buffered)
|
|
|
|
fwrite_str_loopback(send_str + 12, 1); // Now send the '1'
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
rb = fread(dst, 1, 2, stdin); // try again
|
|
TEST_ASSERT_EQUAL(2, rb); // get two characters
|
|
TEST_ASSERT_EQUAL_UINT8_ARRAY("\r1", dst, 2);
|
|
dst += rb;
|
|
|
|
fwrite_str_loopback(send_str + 13, 6); // Send the rest
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
|
|
rb = fread(dst, 1, 4, stdin); // consume "23\r\n"
|
|
TEST_ASSERT_EQUAL(4, rb);
|
|
TEST_ASSERT_EQUAL_UINT8_ARRAY("23\r\n", dst, 4);
|
|
dst += rb;
|
|
|
|
rb = fread(dst, 1, 4, stdin); // ask for more than the remainder
|
|
TEST_ASSERT_EQUAL(2, rb);
|
|
TEST_ASSERT_EQUAL_UINT8_ARRAY("4\n", dst, 2);
|
|
}
|
|
|
|
struct read_task_arg_t {
|
|
char* out_buffer;
|
|
size_t out_buffer_len;
|
|
SemaphoreHandle_t ready;
|
|
SemaphoreHandle_t done;
|
|
};
|
|
|
|
struct write_task_arg_t {
|
|
const char* str;
|
|
SemaphoreHandle_t done;
|
|
};
|
|
|
|
static void read_task_fn(void* varg)
|
|
{
|
|
struct read_task_arg_t* parg = (struct read_task_arg_t*) varg;
|
|
parg->out_buffer[0] = 0;
|
|
|
|
fgets(parg->out_buffer, parg->out_buffer_len, stdin);
|
|
xSemaphoreGive(parg->done);
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
static void write_task_fn(void* varg)
|
|
{
|
|
struct write_task_arg_t* parg = (struct write_task_arg_t*) varg;
|
|
fwrite_str_loopback(parg->str, strlen(parg->str));
|
|
xSemaphoreGive(parg->done);
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
TEST_CASE("can write to UART while another task is reading", "[vfs]")
|
|
{
|
|
char out_buffer[32];
|
|
size_t out_buffer_len = sizeof(out_buffer);
|
|
|
|
struct read_task_arg_t read_arg = {
|
|
.out_buffer = out_buffer,
|
|
.out_buffer_len = out_buffer_len,
|
|
.done = xSemaphoreCreateBinary()
|
|
};
|
|
|
|
struct write_task_arg_t write_arg = {
|
|
.str = "!(@*#&(!*@&#((SDasdkjhadsl\n",
|
|
.done = xSemaphoreCreateBinary()
|
|
};
|
|
|
|
flush_stdin_stdout();
|
|
|
|
ESP_ERROR_CHECK( uart_driver_install(CONFIG_ESP_CONSOLE_UART_NUM,
|
|
256, 0, 0, NULL, 0) );
|
|
esp_vfs_dev_uart_use_driver(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
|
|
|
|
xTaskCreate(&read_task_fn, "vfs_read", 4096, &read_arg, 5, NULL);
|
|
vTaskDelay(10);
|
|
xTaskCreate(&write_task_fn, "vfs_write", 4096, &write_arg, 6, NULL);
|
|
|
|
|
|
int res = xSemaphoreTake(write_arg.done, 100 / portTICK_PERIOD_MS);
|
|
TEST_ASSERT(res);
|
|
|
|
res = xSemaphoreTake(read_arg.done, 100 / portTICK_PERIOD_MS);
|
|
TEST_ASSERT(res);
|
|
|
|
TEST_ASSERT_EQUAL(0, strcmp(write_arg.str, read_arg.out_buffer));
|
|
|
|
esp_vfs_dev_uart_use_nonblocking(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
uart_driver_delete(CONFIG_ESP_CONSOLE_UART_NUM);
|
|
vSemaphoreDelete(read_arg.done);
|
|
vSemaphoreDelete(write_arg.done);
|
|
}
|
|
|
|
TEST_CASE("fcntl supported in UART VFS", "[vfs]")
|
|
{
|
|
int flags = fcntl(STDIN_FILENO, F_GETFL, 0);
|
|
TEST_ASSERT_NOT_EQUAL(-1, flags);
|
|
int res = fcntl(STDIN_FILENO, F_SETFL, flags | O_NONBLOCK);
|
|
TEST_ASSERT_NOT_EQUAL(-1, res);
|
|
/* revert */
|
|
res = fcntl(STDIN_FILENO, F_SETFL, flags);
|
|
TEST_ASSERT_NOT_EQUAL(-1, res);
|
|
}
|
|
|
|
#ifdef CONFIG_VFS_SUPPORT_TERMIOS
|
|
TEST_CASE("Can use termios for UART", "[vfs]")
|
|
{
|
|
uart_config_t uart_config = {
|
|
.baud_rate = 115200,
|
|
.data_bits = UART_DATA_8_BITS,
|
|
.parity = UART_PARITY_DISABLE,
|
|
.stop_bits = UART_STOP_BITS_1,
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.source_clk = UART_SCLK_DEFAULT,
|
|
};
|
|
uart_driver_install(UART_NUM_1, 256, 256, 0, NULL, 0);
|
|
uart_param_config(UART_NUM_1, &uart_config);
|
|
|
|
const int uart_fd = open("/dev/uart/1", O_RDWR);
|
|
TEST_ASSERT_NOT_EQUAL_MESSAGE(uart_fd, -1, "Cannot open UART");
|
|
esp_vfs_dev_uart_use_driver(1);
|
|
|
|
TEST_ASSERT_EQUAL(-1, tcgetattr(uart_fd, NULL));
|
|
TEST_ASSERT_EQUAL(EINVAL, errno);
|
|
|
|
struct termios tios, tios_result;
|
|
|
|
TEST_ASSERT_EQUAL(-1, tcgetattr(-1, &tios));
|
|
TEST_ASSERT_EQUAL(EBADF, errno);
|
|
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios));
|
|
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSADRAIN, &tios));
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSAFLUSH, &tios));
|
|
|
|
tios.c_iflag |= IGNCR;
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
tios.c_iflag &= (~IGNCR);
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(IGNCR, tios_result.c_iflag & IGNCR);
|
|
memset(&tios_result, 0xFF, sizeof(struct termios));
|
|
|
|
tios.c_iflag |= ICRNL;
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
tios.c_iflag &= (~ICRNL);
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(ICRNL, tios_result.c_iflag & ICRNL);
|
|
memset(&tios_result, 0xFF, sizeof(struct termios));
|
|
|
|
{
|
|
uart_word_length_t data_bit;
|
|
uart_stop_bits_t stop_bits;
|
|
uart_parity_t parity_mode;
|
|
|
|
tios.c_cflag &= (~CSIZE);
|
|
tios.c_cflag &= (~CSTOPB);
|
|
tios.c_cflag &= (~PARENB);
|
|
tios.c_cflag |= CS6;
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
tios.c_cflag &= (~CSIZE);
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(CS6, tios_result.c_cflag & CS6);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_word_length(UART_NUM_1, &data_bit));
|
|
TEST_ASSERT_EQUAL(UART_DATA_6_BITS, data_bit);
|
|
TEST_ASSERT_EQUAL(0, tios_result.c_cflag & CSTOPB);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_stop_bits(UART_NUM_1, &stop_bits));
|
|
TEST_ASSERT_EQUAL(UART_STOP_BITS_1, stop_bits);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_parity(UART_NUM_1, &parity_mode));
|
|
TEST_ASSERT_EQUAL(UART_PARITY_DISABLE, parity_mode);
|
|
memset(&tios_result, 0xFF, sizeof(struct termios));
|
|
}
|
|
|
|
{
|
|
uart_stop_bits_t stop_bits;
|
|
uart_parity_t parity_mode;
|
|
|
|
tios.c_cflag |= CSTOPB;
|
|
tios.c_cflag |= (PARENB | PARODD);
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
tios.c_cflag &= (~(CSTOPB | PARENB | PARODD));
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(CSTOPB, tios_result.c_cflag & CSTOPB);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_stop_bits(UART_NUM_1, &stop_bits));
|
|
TEST_ASSERT_EQUAL(UART_STOP_BITS_2, stop_bits);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_parity(UART_NUM_1, &parity_mode));
|
|
TEST_ASSERT_EQUAL(UART_PARITY_ODD, parity_mode);
|
|
memset(&tios_result, 0xFF, sizeof(struct termios));
|
|
}
|
|
|
|
{
|
|
uint32_t baudrate;
|
|
|
|
tios.c_cflag &= (~BOTHER);
|
|
tios.c_cflag |= CBAUD;
|
|
tios.c_ispeed = tios.c_ospeed = B38400;
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(CBAUD, tios_result.c_cflag & CBAUD);
|
|
TEST_ASSERT_EQUAL(B38400, tios_result.c_ispeed);
|
|
TEST_ASSERT_EQUAL(B38400, tios_result.c_ospeed);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_baudrate(UART_NUM_1, &baudrate));
|
|
TEST_ASSERT_EQUAL(38400, baudrate);
|
|
|
|
tios.c_cflag |= CBAUDEX;
|
|
tios.c_ispeed = tios.c_ospeed = B230400;
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(BOTHER, tios_result.c_cflag & BOTHER);
|
|
// Setting the speed to 230400 will set it actually to 230423
|
|
TEST_ASSERT_EQUAL(230423, tios_result.c_ispeed);
|
|
TEST_ASSERT_EQUAL(230423, tios_result.c_ospeed);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_baudrate(UART_NUM_1, &baudrate));
|
|
TEST_ASSERT_EQUAL(230423, baudrate);
|
|
|
|
tios.c_cflag |= BOTHER;
|
|
tios.c_ispeed = tios.c_ospeed = 42321;
|
|
TEST_ASSERT_EQUAL(0, tcsetattr(uart_fd, TCSANOW, &tios));
|
|
TEST_ASSERT_EQUAL(0, tcgetattr(uart_fd, &tios_result));
|
|
TEST_ASSERT_EQUAL(BOTHER, tios_result.c_cflag & BOTHER);
|
|
TEST_ASSERT_EQUAL(42321, tios_result.c_ispeed);
|
|
TEST_ASSERT_EQUAL(42321, tios_result.c_ospeed);
|
|
TEST_ASSERT_EQUAL(ESP_OK, uart_get_baudrate(UART_NUM_1, &baudrate));
|
|
TEST_ASSERT_EQUAL(42321, baudrate);
|
|
|
|
memset(&tios_result, 0xFF, sizeof(struct termios));
|
|
}
|
|
|
|
esp_vfs_dev_uart_use_nonblocking(1);
|
|
close(uart_fd);
|
|
uart_driver_delete(UART_NUM_1);
|
|
}
|
|
#endif // CONFIG_VFS_SUPPORT_TERMIOS
|