kopia lustrzana https://github.com/espressif/esp-idf
898 wiersze
29 KiB
C
898 wiersze
29 KiB
C
// Copyright 2015-2016 Espressif Systems (Shanghai) PTE LTD
|
|
//
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
// you may not use this file except in compliance with the License.
|
|
// You may obtain a copy of the License at
|
|
//
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
//
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
// See the License for the specific language governing permissions and
|
|
// limitations under the License.
|
|
|
|
#include <stdlib.h>
|
|
#include <assert.h>
|
|
#include <string.h>
|
|
#include <stdio.h>
|
|
#include <sys/param.h> // For MIN/MAX(a, b)
|
|
|
|
#include <freertos/FreeRTOS.h>
|
|
#include <freertos/task.h>
|
|
#include <freertos/semphr.h>
|
|
#include <soc/soc.h>
|
|
#include <soc/soc_memory_layout.h>
|
|
#include "sdkconfig.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_spi_flash.h"
|
|
#include "esp_log.h"
|
|
#include "esp_private/system_internal.h"
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
#include "esp32/rom/cache.h"
|
|
#include "esp32/rom/spi_flash.h"
|
|
#include "esp32/clk.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32S2
|
|
#include "esp32s2/rom/cache.h"
|
|
#include "esp32s2/rom/spi_flash.h"
|
|
#include "esp32s2/clk.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32S3
|
|
#include "soc/spi_mem_reg.h"
|
|
#include "esp32s3/rom/spi_flash.h"
|
|
#include "esp32s3/rom/cache.h"
|
|
#include "esp32s3/clk.h"
|
|
#include "esp32s3/clk.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32C3
|
|
#include "esp32c3/rom/cache.h"
|
|
#include "esp32c3/rom/spi_flash.h"
|
|
#include "esp32c3/clk.h"
|
|
#elif CONFIG_IDF_TARGET_ESP32H2
|
|
#include "esp32h2/rom/cache.h"
|
|
#include "esp32h2/rom/spi_flash.h"
|
|
#include "esp32h2/clk.h"
|
|
#endif
|
|
#include "esp_flash_partitions.h"
|
|
#include "cache_utils.h"
|
|
#include "esp_flash.h"
|
|
#include "esp_attr.h"
|
|
#include "spi_flash_private.h"
|
|
|
|
esp_rom_spiflash_result_t IRAM_ATTR spi_flash_write_encrypted_chip(size_t dest_addr, const void *src, size_t size);
|
|
|
|
/* bytes erased by SPIEraseBlock() ROM function */
|
|
#define BLOCK_ERASE_SIZE 65536
|
|
|
|
/* Limit number of bytes written/read in a single SPI operation,
|
|
as these operations disable all higher priority tasks from running.
|
|
*/
|
|
#ifdef CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
|
|
#define MAX_WRITE_CHUNK CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
|
|
#else
|
|
#define MAX_WRITE_CHUNK 8192
|
|
#endif // CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE
|
|
|
|
#define MAX_READ_CHUNK 16384
|
|
|
|
static const char *TAG __attribute__((unused)) = "spi_flash";
|
|
|
|
#if CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
static spi_flash_counters_t s_flash_stats;
|
|
|
|
#define COUNTER_START() uint32_t ts_begin = cpu_hal_get_cycle_count()
|
|
#define COUNTER_STOP(counter) \
|
|
do{ \
|
|
s_flash_stats.counter.count++; \
|
|
s_flash_stats.counter.time += (cpu_hal_get_cycle_count() - ts_begin) / (esp_clk_cpu_freq() / 1000000); \
|
|
} while(0)
|
|
|
|
#define COUNTER_ADD_BYTES(counter, size) \
|
|
do { \
|
|
s_flash_stats.counter.bytes += size; \
|
|
} while (0)
|
|
|
|
#else
|
|
#define COUNTER_START()
|
|
#define COUNTER_STOP(counter)
|
|
#define COUNTER_ADD_BYTES(counter, size)
|
|
|
|
#endif //CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
|
|
#if CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
static esp_err_t spi_flash_translate_rc(esp_rom_spiflash_result_t rc);
|
|
#endif //CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
static bool is_safe_write_address(size_t addr, size_t size);
|
|
static void spi_flash_os_yield(void);
|
|
|
|
const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_default_ops = {
|
|
.start = spi_flash_disable_interrupts_caches_and_other_cpu,
|
|
.end = spi_flash_enable_interrupts_caches_and_other_cpu,
|
|
.op_lock = spi_flash_op_lock,
|
|
.op_unlock = spi_flash_op_unlock,
|
|
#if !CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED
|
|
.is_safe_write_address = is_safe_write_address,
|
|
#endif
|
|
.yield = spi_flash_os_yield,
|
|
};
|
|
|
|
const DRAM_ATTR spi_flash_guard_funcs_t g_flash_guard_no_os_ops = {
|
|
.start = spi_flash_disable_interrupts_caches_and_other_cpu_no_os,
|
|
.end = spi_flash_enable_interrupts_caches_no_os,
|
|
.op_lock = NULL,
|
|
.op_unlock = NULL,
|
|
#if !CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED
|
|
.is_safe_write_address = NULL,
|
|
#endif
|
|
.yield = NULL,
|
|
};
|
|
|
|
#ifdef CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS
|
|
#define UNSAFE_WRITE_ADDRESS abort()
|
|
#else
|
|
#define UNSAFE_WRITE_ADDRESS return false
|
|
#endif
|
|
|
|
|
|
/* CHECK_WRITE_ADDRESS macro to fail writes which land in the
|
|
bootloader, partition table, or running application region.
|
|
*/
|
|
#if CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED
|
|
#define CHECK_WRITE_ADDRESS(ADDR, SIZE)
|
|
#else /* FAILS or ABORTS */
|
|
#define CHECK_WRITE_ADDRESS(ADDR, SIZE) do { \
|
|
if (guard && guard->is_safe_write_address && !guard->is_safe_write_address(ADDR, SIZE)) { \
|
|
return ESP_ERR_INVALID_ARG; \
|
|
} \
|
|
} while(0)
|
|
#endif // CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED
|
|
|
|
static __attribute__((unused)) bool is_safe_write_address(size_t addr, size_t size)
|
|
{
|
|
if (!esp_partition_main_flash_region_safe(addr, size)) {
|
|
UNSAFE_WRITE_ADDRESS;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#if CONFIG_SPI_FLASH_ROM_IMPL
|
|
#include "esp_heap_caps.h"
|
|
typedef void *(*malloc_internal_cb_t)(size_t size);
|
|
|
|
void IRAM_ATTR *spi_flash_malloc_internal(size_t size)
|
|
{
|
|
return heap_caps_malloc(size, MALLOC_CAP_8BIT|MALLOC_CAP_INTERNAL);
|
|
}
|
|
#endif
|
|
|
|
void spi_flash_init(void)
|
|
{
|
|
spi_flash_init_lock();
|
|
#if CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
spi_flash_reset_counters();
|
|
#endif
|
|
|
|
#if CONFIG_SPI_FLASH_ROM_IMPL
|
|
spi_flash_guard_set(&g_flash_guard_default_ops);
|
|
|
|
/* These two functions are in ROM only */
|
|
extern void spi_flash_mmap_os_func_set(void *(*func1)(size_t size), void (*func2)(void *p));
|
|
spi_flash_mmap_os_func_set(spi_flash_malloc_internal, heap_caps_free);
|
|
|
|
extern esp_err_t spi_flash_mmap_page_num_init(uint32_t page_num);
|
|
spi_flash_mmap_page_num_init(128);
|
|
#endif
|
|
}
|
|
|
|
#if !CONFIG_SPI_FLASH_ROM_IMPL
|
|
|
|
static const spi_flash_guard_funcs_t *s_flash_guard_ops;
|
|
|
|
void IRAM_ATTR spi_flash_guard_set(const spi_flash_guard_funcs_t *funcs)
|
|
{
|
|
s_flash_guard_ops = funcs;
|
|
}
|
|
|
|
const spi_flash_guard_funcs_t *IRAM_ATTR spi_flash_guard_get(void)
|
|
{
|
|
return s_flash_guard_ops;
|
|
}
|
|
|
|
#endif
|
|
|
|
size_t IRAM_ATTR spi_flash_get_chip_size(void)
|
|
{
|
|
return g_rom_flashchip.chip_size;
|
|
}
|
|
|
|
static inline void IRAM_ATTR spi_flash_guard_start(void)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
if (guard && guard->start) {
|
|
guard->start();
|
|
}
|
|
}
|
|
|
|
static inline void IRAM_ATTR spi_flash_guard_end(void)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
if (guard && guard->end) {
|
|
guard->end();
|
|
}
|
|
}
|
|
|
|
static inline void IRAM_ATTR spi_flash_guard_op_lock(void)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
if (guard && guard->op_lock) {
|
|
guard->op_lock();
|
|
}
|
|
}
|
|
|
|
static inline void IRAM_ATTR spi_flash_guard_op_unlock(void)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
if (guard && guard->op_unlock) {
|
|
guard->op_unlock();
|
|
}
|
|
}
|
|
|
|
static void IRAM_ATTR spi_flash_os_yield(void)
|
|
{
|
|
#ifdef CONFIG_SPI_FLASH_YIELD_DURING_ERASE
|
|
vTaskDelay(CONFIG_SPI_FLASH_ERASE_YIELD_TICKS);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
static esp_rom_spiflash_result_t IRAM_ATTR spi_flash_unlock(void)
|
|
{
|
|
static bool unlocked = false;
|
|
if (!unlocked) {
|
|
spi_flash_guard_start();
|
|
esp_rom_spiflash_result_t rc = esp_rom_spiflash_unlock();
|
|
spi_flash_guard_end();
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
return rc;
|
|
}
|
|
unlocked = true;
|
|
}
|
|
return ESP_ROM_SPIFLASH_RESULT_OK;
|
|
}
|
|
#endif // CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
|
|
esp_err_t IRAM_ATTR spi_flash_erase_sector(size_t sec)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
CHECK_WRITE_ADDRESS(sec * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
|
|
return spi_flash_erase_range(sec * SPI_FLASH_SEC_SIZE, SPI_FLASH_SEC_SIZE);
|
|
}
|
|
|
|
#ifdef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
//deprecated, only used in compatible mode
|
|
esp_err_t IRAM_ATTR spi_flash_erase_range(size_t start_addr, size_t size)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
CHECK_WRITE_ADDRESS(start_addr, size);
|
|
if (start_addr % SPI_FLASH_SEC_SIZE != 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if (size % SPI_FLASH_SEC_SIZE != 0) {
|
|
return ESP_ERR_INVALID_SIZE;
|
|
}
|
|
if (size + start_addr > spi_flash_get_chip_size()) {
|
|
return ESP_ERR_INVALID_SIZE;
|
|
}
|
|
size_t start = start_addr / SPI_FLASH_SEC_SIZE;
|
|
size_t end = start + size / SPI_FLASH_SEC_SIZE;
|
|
const size_t sectors_per_block = BLOCK_ERASE_SIZE / SPI_FLASH_SEC_SIZE;
|
|
COUNTER_START();
|
|
esp_rom_spiflash_result_t rc;
|
|
rc = spi_flash_unlock();
|
|
if (rc == ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
#ifdef CONFIG_SPI_FLASH_YIELD_DURING_ERASE
|
|
int64_t no_yield_time_us = 0;
|
|
#endif
|
|
for (size_t sector = start; sector != end && rc == ESP_ROM_SPIFLASH_RESULT_OK; ) {
|
|
#ifdef CONFIG_SPI_FLASH_YIELD_DURING_ERASE
|
|
int64_t start_time_us = esp_system_get_time();
|
|
#endif
|
|
spi_flash_guard_start();
|
|
#ifndef CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE
|
|
if (sector % sectors_per_block == 0 && end - sector >= sectors_per_block) {
|
|
rc = esp_rom_spiflash_erase_block(sector / sectors_per_block);
|
|
sector += sectors_per_block;
|
|
COUNTER_ADD_BYTES(erase, sectors_per_block * SPI_FLASH_SEC_SIZE);
|
|
} else
|
|
#endif
|
|
{
|
|
rc = esp_rom_spiflash_erase_sector(sector);
|
|
++sector;
|
|
COUNTER_ADD_BYTES(erase, SPI_FLASH_SEC_SIZE);
|
|
}
|
|
spi_flash_guard_end();
|
|
#ifdef CONFIG_SPI_FLASH_YIELD_DURING_ERASE
|
|
no_yield_time_us += (esp_system_get_time() - start_time_us);
|
|
if (no_yield_time_us / 1000 >= CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS) {
|
|
no_yield_time_us = 0;
|
|
if (s_flash_guard_ops && s_flash_guard_ops->yield) {
|
|
s_flash_guard_ops->yield();
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
COUNTER_STOP(erase);
|
|
|
|
spi_flash_guard_start();
|
|
// Ensure WEL is 0 after the operation, even if the erase failed.
|
|
esp_rom_spiflash_write_disable();
|
|
spi_flash_check_and_flush_cache(start_addr, size);
|
|
spi_flash_guard_end();
|
|
|
|
return spi_flash_translate_rc(rc);
|
|
}
|
|
|
|
/* Wrapper around esp_rom_spiflash_write() that verifies data as written if CONFIG_SPI_FLASH_VERIFY_WRITE is set.
|
|
|
|
If CONFIG_SPI_FLASH_VERIFY_WRITE is not set, this is esp_rom_spiflash_write().
|
|
*/
|
|
static IRAM_ATTR esp_rom_spiflash_result_t spi_flash_write_inner(uint32_t target, const uint32_t *src_addr, int32_t len)
|
|
{
|
|
#ifndef CONFIG_SPI_FLASH_VERIFY_WRITE
|
|
return esp_rom_spiflash_write(target, src_addr, len);
|
|
#else // CONFIG_SPI_FLASH_VERIFY_WRITE
|
|
esp_rom_spiflash_result_t res = ESP_ROM_SPIFLASH_RESULT_OK;
|
|
assert(len % sizeof(uint32_t) == 0);
|
|
|
|
uint32_t before_buf[ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM / sizeof(uint32_t)];
|
|
uint32_t after_buf[ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM / sizeof(uint32_t)];
|
|
uint32_t *expected_buf = before_buf;
|
|
int32_t remaining = len;
|
|
for(int i = 0; i < len; i += sizeof(before_buf)) {
|
|
int i_w = i / sizeof(uint32_t); // index in words (i is an index in bytes)
|
|
int32_t read_len = MIN(sizeof(before_buf), remaining);
|
|
|
|
// Read "before" contents from flash
|
|
res = esp_rom_spiflash_read(target + i, before_buf, read_len);
|
|
if (res != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
break;
|
|
}
|
|
|
|
for (int r = 0; r < read_len; r += sizeof(uint32_t)) {
|
|
int r_w = r / sizeof(uint32_t); // index in words (r is index in bytes)
|
|
|
|
uint32_t write = src_addr[i_w + r_w];
|
|
uint32_t before = before_buf[r_w];
|
|
uint32_t expected = write & before;
|
|
#ifdef CONFIG_SPI_FLASH_WARN_SETTING_ZERO_TO_ONE
|
|
if ((before & write) != write) {
|
|
spi_flash_guard_end();
|
|
ESP_LOGW(TAG, "Write at offset 0x%x requests 0x%08x but will write 0x%08x -> 0x%08x",
|
|
target + i + r, write, before, before & write);
|
|
spi_flash_guard_start();
|
|
}
|
|
#endif
|
|
expected_buf[r_w] = expected;
|
|
}
|
|
|
|
res = esp_rom_spiflash_write(target + i, &src_addr[i_w], read_len);
|
|
if (res != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
break;
|
|
}
|
|
|
|
res = esp_rom_spiflash_read(target + i, after_buf, read_len);
|
|
if (res != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
break;
|
|
}
|
|
|
|
for (int r = 0; r < read_len; r += sizeof(uint32_t)) {
|
|
int r_w = r / sizeof(uint32_t); // index in words (r is index in bytes)
|
|
|
|
uint32_t expected = expected_buf[r_w];
|
|
uint32_t actual = after_buf[r_w];
|
|
if (expected != actual) {
|
|
#ifdef CONFIG_SPI_FLASH_LOG_FAILED_WRITE
|
|
spi_flash_guard_end();
|
|
ESP_LOGE(TAG, "Bad write at offset 0x%x expected 0x%08x readback 0x%08x", target + i + r, expected, actual);
|
|
spi_flash_guard_start();
|
|
#endif
|
|
res = ESP_ROM_SPIFLASH_RESULT_ERR;
|
|
}
|
|
}
|
|
if (res != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
break;
|
|
}
|
|
remaining -= read_len;
|
|
}
|
|
return res;
|
|
#endif // CONFIG_SPI_FLASH_VERIFY_WRITE
|
|
}
|
|
|
|
|
|
esp_err_t IRAM_ATTR spi_flash_write(size_t dst, const void *srcv, size_t size)
|
|
{
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
CHECK_WRITE_ADDRESS(dst, size);
|
|
// Out of bound writes are checked in ROM code, but we can give better
|
|
// error code here
|
|
if (dst + size > g_rom_flashchip.chip_size) {
|
|
return ESP_ERR_INVALID_SIZE;
|
|
}
|
|
if (size == 0) {
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t rc = ESP_ROM_SPIFLASH_RESULT_OK;
|
|
COUNTER_START();
|
|
const uint8_t *srcc = (const uint8_t *) srcv;
|
|
/*
|
|
* Large operations are split into (up to) 3 parts:
|
|
* - Left padding: 4 bytes up to the first 4-byte aligned destination offset.
|
|
* - Middle part
|
|
* - Right padding: 4 bytes from the last 4-byte aligned offset covered.
|
|
*/
|
|
size_t left_off = dst & ~3U;
|
|
size_t left_size = MIN(((dst + 3) & ~3U) - dst, size);
|
|
size_t mid_off = left_size;
|
|
size_t mid_size = (size - left_size) & ~3U;
|
|
size_t right_off = left_size + mid_size;
|
|
size_t right_size = size - mid_size - left_size;
|
|
|
|
rc = spi_flash_unlock();
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
if (left_size > 0) {
|
|
uint32_t t = 0xffffffff;
|
|
memcpy(((uint8_t *) &t) + (dst - left_off), srcc, left_size);
|
|
spi_flash_guard_start();
|
|
rc = spi_flash_write_inner(left_off, &t, 4);
|
|
spi_flash_guard_end();
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
COUNTER_ADD_BYTES(write, 4);
|
|
}
|
|
if (mid_size > 0) {
|
|
/* If src buffer is 4-byte aligned as well and is not in a region that requires cache access to be enabled, we
|
|
* can write directly without buffering in RAM. */
|
|
#ifdef ESP_PLATFORM
|
|
bool direct_write = esp_ptr_internal(srcc)
|
|
&& esp_ptr_byte_accessible(srcc)
|
|
&& ((uintptr_t) srcc + mid_off) % 4 == 0;
|
|
#else
|
|
bool direct_write = true;
|
|
#endif
|
|
while(mid_size > 0 && rc == ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
uint32_t write_buf[8];
|
|
uint32_t write_size = MIN(mid_size, MAX_WRITE_CHUNK);
|
|
const uint8_t *write_src = srcc + mid_off;
|
|
if (!direct_write) {
|
|
write_size = MIN(write_size, sizeof(write_buf));
|
|
memcpy(write_buf, write_src, write_size);
|
|
write_src = (const uint8_t *)write_buf;
|
|
}
|
|
spi_flash_guard_start();
|
|
rc = spi_flash_write_inner(dst + mid_off, (const uint32_t *) write_src, write_size);
|
|
spi_flash_guard_end();
|
|
COUNTER_ADD_BYTES(write, write_size);
|
|
mid_size -= write_size;
|
|
mid_off += write_size;
|
|
}
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
if (right_size > 0) {
|
|
uint32_t t = 0xffffffff;
|
|
memcpy(&t, srcc + right_off, right_size);
|
|
spi_flash_guard_start();
|
|
rc = spi_flash_write_inner(dst + right_off, &t, 4);
|
|
spi_flash_guard_end();
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
COUNTER_ADD_BYTES(write, 4);
|
|
}
|
|
out:
|
|
COUNTER_STOP(write);
|
|
|
|
spi_flash_guard_start();
|
|
// Ensure WEL is 0 after the operation, even if the write failed.
|
|
esp_rom_spiflash_write_disable();
|
|
spi_flash_check_and_flush_cache(dst, size);
|
|
spi_flash_guard_end();
|
|
|
|
return spi_flash_translate_rc(rc);
|
|
}
|
|
#endif // CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
|
|
#if !CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
extern void spi_common_set_dummy_output(esp_rom_spiflash_read_mode_t mode);
|
|
extern void spi_dummy_len_fix(uint8_t spi, uint8_t freqdiv);
|
|
void IRAM_ATTR flash_rom_init(void)
|
|
{
|
|
uint32_t freqdiv = 0;
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
uint32_t dummy_bit = 0;
|
|
#if CONFIG_ESPTOOLPY_FLASHFREQ_80M
|
|
dummy_bit = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_80M;
|
|
#elif CONFIG_ESPTOOLPY_FLASHFREQ_40M
|
|
dummy_bit = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_40M;
|
|
#elif CONFIG_ESPTOOLPY_FLASHFREQ_26M
|
|
dummy_bit = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_26M;
|
|
#elif CONFIG_ESPTOOLPY_FLASHFREQ_20M
|
|
dummy_bit = ESP_ROM_SPIFLASH_DUMMY_LEN_PLUS_20M;
|
|
#endif
|
|
#endif//CONFIG_IDF_TARGET_ESP32
|
|
|
|
#if CONFIG_ESPTOOLPY_FLASHFREQ_80M
|
|
freqdiv = 1;
|
|
#elif CONFIG_ESPTOOLPY_FLASHFREQ_40M
|
|
freqdiv = 2;
|
|
#elif CONFIG_ESPTOOLPY_FLASHFREQ_26M
|
|
freqdiv = 3;
|
|
#elif CONFIG_ESPTOOLPY_FLASHFREQ_20M
|
|
freqdiv = 4;
|
|
#endif
|
|
|
|
#if !CONFIG_IDF_TARGET_ESP32S2 && !CONFIG_IDF_TARGET_ESP32
|
|
esp_rom_spiflash_read_mode_t read_mode;
|
|
#if CONFIG_ESPTOOLPY_FLASHMODE_QIO
|
|
read_mode = ESP_ROM_SPIFLASH_QIO_MODE;
|
|
#elif CONFIG_ESPTOOLPY_FLASHMODE_QOUT
|
|
read_mode = ESP_ROM_SPIFLASH_QOUT_MODE;
|
|
#elif CONFIG_ESPTOOLPY_FLASHMODE_DIO
|
|
read_mode = ESP_ROM_SPIFLASH_DIO_MODE;
|
|
#elif CONFIG_ESPTOOLPY_FLASHMODE_DOUT
|
|
read_mode = ESP_ROM_SPIFLASH_DOUT_MODE;
|
|
#endif
|
|
#endif //!CONFIG_IDF_TARGET_ESP32S2 && !CONFIG_IDF_TARGET_ESP32
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
g_rom_spiflash_dummy_len_plus[1] = dummy_bit;
|
|
#else
|
|
spi_dummy_len_fix(1, freqdiv);
|
|
#endif //CONFIG_IDF_TARGET_ESP32
|
|
|
|
#if !CONFIG_IDF_TARGET_ESP32S2 && !CONFIG_IDF_TARGET_ESP32
|
|
spi_common_set_dummy_output(read_mode);
|
|
#endif //!CONFIG_IDF_TARGET_ESP32S2
|
|
esp_rom_spiflash_config_clk(freqdiv, 1);
|
|
}
|
|
#else
|
|
void IRAM_ATTR flash_rom_init(void)
|
|
{
|
|
return;
|
|
}
|
|
|
|
esp_err_t IRAM_ATTR spi_flash_write_encrypted(size_t dest_addr, const void *src, size_t size)
|
|
{
|
|
esp_err_t err = ESP_OK;
|
|
const spi_flash_guard_funcs_t *guard = spi_flash_guard_get();
|
|
CHECK_WRITE_ADDRESS(dest_addr, size);
|
|
if ((dest_addr % 16) != 0) {
|
|
return ESP_ERR_INVALID_ARG;
|
|
}
|
|
if ((size % 16) != 0) {
|
|
return ESP_ERR_INVALID_SIZE;
|
|
}
|
|
|
|
COUNTER_START();
|
|
esp_rom_spiflash_result_t rc = spi_flash_unlock();
|
|
err = spi_flash_translate_rc(rc);
|
|
if (err != ESP_OK) {
|
|
goto fail;
|
|
}
|
|
|
|
#ifndef CONFIG_SPI_FLASH_VERIFY_WRITE
|
|
err = spi_flash_write_encrypted_chip(dest_addr, src, size);
|
|
COUNTER_ADD_BYTES(write, size);
|
|
spi_flash_guard_start();
|
|
esp_rom_spiflash_write_disable();
|
|
spi_flash_check_and_flush_cache(dest_addr, size);
|
|
spi_flash_guard_end();
|
|
#else
|
|
const uint32_t* src_w = (const uint32_t*)src;
|
|
uint32_t read_buf[ESP_ROM_SPIFLASH_BUFF_BYTE_READ_NUM / sizeof(uint32_t)];
|
|
int32_t remaining = size;
|
|
for(int i = 0; i < size; i += sizeof(read_buf)) {
|
|
int i_w = i / sizeof(uint32_t); // index in words (i is an index in bytes)
|
|
int32_t read_len = MIN(sizeof(read_buf), remaining);
|
|
|
|
// Read "before" contents from flash
|
|
esp_err_t err = spi_flash_read(dest_addr + i, read_buf, read_len);
|
|
if (err != ESP_OK) {
|
|
break;
|
|
}
|
|
|
|
#ifdef CONFIG_SPI_FLASH_WARN_SETTING_ZERO_TO_ONE
|
|
//The written data cannot be predicted, so warning is shown if any of the bits is not 1.
|
|
for (int r = 0; r < read_len; r += sizeof(uint32_t)) {
|
|
uint32_t before = read_buf[r / sizeof(uint32_t)];
|
|
if (before != 0xFFFFFFFF) {
|
|
ESP_LOGW(TAG, "Encrypted write at offset 0x%x but not erased (0x%08x)",
|
|
dest_addr + i + r, before);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
err = spi_flash_write_encrypted_chip(dest_addr + i, src + i, read_len);
|
|
if (err != ESP_OK) {
|
|
break;
|
|
}
|
|
COUNTER_ADD_BYTES(write, size);
|
|
|
|
spi_flash_guard_start();
|
|
esp_rom_spiflash_write_disable();
|
|
spi_flash_check_and_flush_cache(dest_addr, size);
|
|
spi_flash_guard_end();
|
|
|
|
err = spi_flash_read_encrypted(dest_addr + i, read_buf, read_len);
|
|
if (err != ESP_OK) {
|
|
break;
|
|
}
|
|
|
|
for (int r = 0; r < read_len; r += sizeof(uint32_t)) {
|
|
int r_w = r / sizeof(uint32_t); // index in words (r is index in bytes)
|
|
|
|
uint32_t expected = src_w[i_w + r_w];
|
|
uint32_t actual = read_buf[r_w];
|
|
if (expected != actual) {
|
|
#ifdef CONFIG_SPI_FLASH_LOG_FAILED_WRITE
|
|
ESP_LOGE(TAG, "Bad write at offset 0x%x expected 0x%08x readback 0x%08x", dest_addr + i + r, expected, actual);
|
|
#endif
|
|
err = ESP_FAIL;
|
|
}
|
|
}
|
|
if (err != ESP_OK) {
|
|
break;
|
|
}
|
|
remaining -= read_len;
|
|
}
|
|
#endif // CONFIG_SPI_FLASH_VERIFY_WRITE
|
|
|
|
fail:
|
|
|
|
COUNTER_STOP(write);
|
|
return err;
|
|
}
|
|
|
|
esp_err_t IRAM_ATTR spi_flash_read(size_t src, void *dstv, size_t size)
|
|
{
|
|
// Out of bound reads are checked in ROM code, but we can give better
|
|
// error code here
|
|
if (src + size > g_rom_flashchip.chip_size) {
|
|
return ESP_ERR_INVALID_SIZE;
|
|
}
|
|
if (size == 0) {
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_rom_spiflash_result_t rc = ESP_ROM_SPIFLASH_RESULT_OK;
|
|
COUNTER_START();
|
|
spi_flash_guard_start();
|
|
/* To simplify boundary checks below, we handle small reads separately. */
|
|
if (size < 16) {
|
|
uint32_t t[6]; /* Enough for 16 bytes + 4 on either side for padding. */
|
|
uint32_t read_src = src & ~3U;
|
|
uint32_t left_off = src & 3U;
|
|
uint32_t read_size = (left_off + size + 3) & ~3U;
|
|
rc = esp_rom_spiflash_read(read_src, t, read_size);
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
COUNTER_ADD_BYTES(read, read_size);
|
|
#ifdef ESP_PLATFORM
|
|
if (esp_ptr_external_ram(dstv)) {
|
|
spi_flash_guard_end();
|
|
memcpy(dstv, ((uint8_t *) t) + left_off, size);
|
|
spi_flash_guard_start();
|
|
} else {
|
|
memcpy(dstv, ((uint8_t *) t) + left_off, size);
|
|
}
|
|
#else
|
|
memcpy(dstv, ((uint8_t *) t) + left_off, size);
|
|
#endif
|
|
goto out;
|
|
}
|
|
uint8_t *dstc = (uint8_t *) dstv;
|
|
intptr_t dsti = (intptr_t) dstc;
|
|
/*
|
|
* Large operations are split into (up to) 3 parts:
|
|
* - The middle part: from the first 4-aligned position in src to the first
|
|
* 4-aligned position in dst.
|
|
*/
|
|
size_t src_mid_off = (src % 4 == 0 ? 0 : 4 - (src % 4));
|
|
size_t dst_mid_off = (dsti % 4 == 0 ? 0 : 4 - (dsti % 4));
|
|
size_t mid_size = (size - MAX(src_mid_off, dst_mid_off)) & ~3U;
|
|
/*
|
|
* - Once the middle part is in place, src_mid_off bytes from the preceding
|
|
* 4-aligned source location are added on the left.
|
|
*/
|
|
size_t pad_left_src = src & ~3U;
|
|
size_t pad_left_size = src_mid_off;
|
|
/*
|
|
* - Finally, the right part is added: from the end of the middle part to
|
|
* the end. Depending on the alignment of source and destination, this may
|
|
* be a 4 or 8 byte read from pad_right_src.
|
|
*/
|
|
size_t pad_right_src = (src + pad_left_size + mid_size) & ~3U;
|
|
size_t pad_right_off = (pad_right_src - src);
|
|
size_t pad_right_size = (size - pad_right_off);
|
|
|
|
#ifdef ESP_PLATFORM
|
|
bool direct_read = esp_ptr_internal(dstc)
|
|
&& esp_ptr_byte_accessible(dstc)
|
|
&& ((uintptr_t) dstc + dst_mid_off) % 4 == 0;
|
|
#else
|
|
bool direct_read = true;
|
|
#endif
|
|
if (mid_size > 0) {
|
|
uint32_t mid_remaining = mid_size;
|
|
uint32_t mid_read = 0;
|
|
while (mid_remaining > 0) {
|
|
uint32_t read_size = MIN(mid_remaining, MAX_READ_CHUNK);
|
|
uint32_t read_buf[8];
|
|
uint8_t *read_dst_final = dstc + dst_mid_off + mid_read;
|
|
uint8_t *read_dst = read_dst_final;
|
|
if (!direct_read) {
|
|
read_size = MIN(read_size, sizeof(read_buf));
|
|
read_dst = (uint8_t *) read_buf;
|
|
}
|
|
rc = esp_rom_spiflash_read(src + src_mid_off + mid_read,
|
|
(uint32_t *) read_dst, read_size);
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
mid_remaining -= read_size;
|
|
mid_read += read_size;
|
|
if (!direct_read) {
|
|
spi_flash_guard_end();
|
|
memcpy(read_dst_final, read_buf, read_size);
|
|
spi_flash_guard_start();
|
|
} else if (mid_remaining > 0) {
|
|
/* Drop guard momentarily, allows other tasks to preempt */
|
|
spi_flash_guard_end();
|
|
spi_flash_guard_start();
|
|
}
|
|
}
|
|
COUNTER_ADD_BYTES(read, mid_size);
|
|
/*
|
|
* If offsets in src and dst are different, perform an in-place shift
|
|
* to put destination data into its final position.
|
|
* Note that the shift can be left (src_mid_off < dst_mid_off) or right.
|
|
*/
|
|
if (src_mid_off != dst_mid_off) {
|
|
if (!direct_read) {
|
|
spi_flash_guard_end();
|
|
}
|
|
memmove(dstc + src_mid_off, dstc + dst_mid_off, mid_size);
|
|
if (!direct_read) {
|
|
spi_flash_guard_start();
|
|
}
|
|
}
|
|
}
|
|
if (pad_left_size > 0) {
|
|
uint32_t t;
|
|
rc = esp_rom_spiflash_read(pad_left_src, &t, 4);
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
COUNTER_ADD_BYTES(read, 4);
|
|
if (!direct_read) {
|
|
spi_flash_guard_end();
|
|
}
|
|
memcpy(dstc, ((uint8_t *) &t) + (4 - pad_left_size), pad_left_size);
|
|
if (!direct_read) {
|
|
spi_flash_guard_start();
|
|
}
|
|
}
|
|
if (pad_right_size > 0) {
|
|
uint32_t t[2];
|
|
int32_t read_size = (pad_right_size <= 4 ? 4 : 8);
|
|
rc = esp_rom_spiflash_read(pad_right_src, t, read_size);
|
|
if (rc != ESP_ROM_SPIFLASH_RESULT_OK) {
|
|
goto out;
|
|
}
|
|
COUNTER_ADD_BYTES(read, read_size);
|
|
if (!direct_read) {
|
|
spi_flash_guard_end();
|
|
}
|
|
memcpy(dstc + pad_right_off, t, pad_right_size);
|
|
if (!direct_read) {
|
|
spi_flash_guard_start();
|
|
}
|
|
}
|
|
out:
|
|
spi_flash_guard_end();
|
|
COUNTER_STOP(read);
|
|
return spi_flash_translate_rc(rc);
|
|
}
|
|
#endif // !CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
|
|
esp_err_t IRAM_ATTR spi_flash_read_encrypted(size_t src, void *dstv, size_t size)
|
|
{
|
|
if (src + size > g_rom_flashchip.chip_size) {
|
|
return ESP_ERR_INVALID_SIZE;
|
|
}
|
|
if (size == 0) {
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t err;
|
|
const uint8_t *map;
|
|
spi_flash_mmap_handle_t map_handle;
|
|
size_t map_src = src & ~(SPI_FLASH_MMU_PAGE_SIZE - 1);
|
|
size_t map_size = size + (src - map_src);
|
|
|
|
err = spi_flash_mmap(map_src, map_size, SPI_FLASH_MMAP_DATA, (const void **)&map, &map_handle);
|
|
if (err != ESP_OK) {
|
|
return err;
|
|
}
|
|
memcpy(dstv, map + (src - map_src), size);
|
|
spi_flash_munmap(map_handle);
|
|
return err;
|
|
}
|
|
|
|
#if CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
static esp_err_t IRAM_ATTR spi_flash_translate_rc(esp_rom_spiflash_result_t rc)
|
|
{
|
|
switch (rc) {
|
|
case ESP_ROM_SPIFLASH_RESULT_OK:
|
|
return ESP_OK;
|
|
case ESP_ROM_SPIFLASH_RESULT_TIMEOUT:
|
|
return ESP_ERR_FLASH_OP_TIMEOUT;
|
|
case ESP_ROM_SPIFLASH_RESULT_ERR:
|
|
default:
|
|
return ESP_ERR_FLASH_OP_FAIL;
|
|
}
|
|
}
|
|
#endif //CONFIG_SPI_FLASH_USE_LEGACY_IMPL
|
|
|
|
#if CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
|
|
static inline void dump_counter(spi_flash_counter_t *counter, const char *name)
|
|
{
|
|
ESP_LOGI(TAG, "%s count=%8d time=%8dus bytes=%8d\n", name,
|
|
counter->count, counter->time, counter->bytes);
|
|
}
|
|
|
|
const spi_flash_counters_t *spi_flash_get_counters(void)
|
|
{
|
|
return &s_flash_stats;
|
|
}
|
|
|
|
void spi_flash_reset_counters(void)
|
|
{
|
|
memset(&s_flash_stats, 0, sizeof(s_flash_stats));
|
|
}
|
|
|
|
void spi_flash_dump_counters(void)
|
|
{
|
|
dump_counter(&s_flash_stats.read, "read ");
|
|
dump_counter(&s_flash_stats.write, "write");
|
|
dump_counter(&s_flash_stats.erase, "erase");
|
|
}
|
|
|
|
#endif //CONFIG_SPI_FLASH_ENABLE_COUNTERS
|
|
|
|
#if CONFIG_SPI_FLASH_USE_LEGACY_IMPL && !CONFIG_IDF_TARGET_ESP32
|
|
// TODO esp32s2: Remove once ESP32-S2 & later chips has new SPI Flash API support
|
|
esp_flash_t *esp_flash_default_chip = NULL;
|
|
#endif
|
|
|
|
void IRAM_ATTR spi_flash_set_rom_required_regs(void)
|
|
{
|
|
#if CONFIG_ESPTOOLPY_OCT_FLASH
|
|
//Disable the variable dummy mode when doing timing tuning
|
|
CLEAR_PERI_REG_MASK(SPI_MEM_DDR_REG(1), SPI_MEM_SPI_FMEM_VAR_DUMMY);
|
|
/**
|
|
* STR /DTR mode setting is done every time when `esp_rom_opiflash_exec_cmd` is called
|
|
*
|
|
* Add any registers that are not set in ROM SPI flash functions here in the future
|
|
*/
|
|
#endif
|
|
}
|