esp-idf/components/esp_hw_support/periph_ctrl.c

141 wiersze
3.7 KiB
C

/*
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "freertos/FreeRTOS.h"
#include "hal/clk_gate_ll.h"
#include "esp_attr.h"
#include "esp_private/periph_ctrl.h"
#include "soc/soc_caps.h"
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
#include "esp_private/esp_modem_clock.h"
#endif
/// @brief For simplicity and backward compatible, we are using the same spin lock for both bus clock on/off and reset
/// @note We may want to split them into two spin locks in the future
static portMUX_TYPE periph_spinlock = portMUX_INITIALIZER_UNLOCKED;
static uint8_t ref_counts[PERIPH_MODULE_MAX] = {0};
IRAM_ATTR void periph_rcc_enter(void)
{
portENTER_CRITICAL_SAFE(&periph_spinlock);
}
IRAM_ATTR void periph_rcc_exit(void)
{
portEXIT_CRITICAL_SAFE(&periph_spinlock);
}
uint8_t periph_rcc_acquire_enter(periph_module_t periph)
{
periph_rcc_enter();
return ref_counts[periph];
}
void periph_rcc_acquire_exit(periph_module_t periph, uint8_t ref_count)
{
ref_counts[periph] = ++ref_count;
periph_rcc_exit();
}
uint8_t periph_rcc_release_enter(periph_module_t periph)
{
periph_rcc_enter();
return ref_counts[periph] - 1;
}
void periph_rcc_release_exit(periph_module_t periph, uint8_t ref_count)
{
ref_counts[periph] = ref_count;
periph_rcc_exit();
}
void periph_module_enable(periph_module_t periph)
{
assert(periph < PERIPH_MODULE_MAX);
portENTER_CRITICAL_SAFE(&periph_spinlock);
if (ref_counts[periph] == 0) {
periph_ll_enable_clk_clear_rst(periph);
}
ref_counts[periph]++;
portEXIT_CRITICAL_SAFE(&periph_spinlock);
}
void periph_module_disable(periph_module_t periph)
{
assert(periph < PERIPH_MODULE_MAX);
portENTER_CRITICAL_SAFE(&periph_spinlock);
ref_counts[periph]--;
if (ref_counts[periph] == 0) {
periph_ll_disable_clk_set_rst(periph);
}
portEXIT_CRITICAL_SAFE(&periph_spinlock);
}
void periph_module_reset(periph_module_t periph)
{
assert(periph < PERIPH_MODULE_MAX);
portENTER_CRITICAL_SAFE(&periph_spinlock);
periph_ll_reset(periph);
portEXIT_CRITICAL_SAFE(&periph_spinlock);
}
#if !SOC_IEEE802154_BLE_ONLY
#if SOC_BT_SUPPORTED || SOC_WIFI_SUPPORTED
IRAM_ATTR void wifi_bt_common_module_enable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
modem_clock_module_enable(PERIPH_PHY_MODULE);
#else
portENTER_CRITICAL_SAFE(&periph_spinlock);
if (ref_counts[PERIPH_WIFI_BT_COMMON_MODULE] == 0) {
periph_ll_wifi_bt_module_enable_clk();
}
ref_counts[PERIPH_WIFI_BT_COMMON_MODULE]++;
portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}
IRAM_ATTR void wifi_bt_common_module_disable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
modem_clock_module_disable(PERIPH_PHY_MODULE);
#else
portENTER_CRITICAL_SAFE(&periph_spinlock);
ref_counts[PERIPH_WIFI_BT_COMMON_MODULE]--;
if (ref_counts[PERIPH_WIFI_BT_COMMON_MODULE] == 0) {
periph_ll_wifi_bt_module_disable_clk();
}
portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}
#endif //#if SOC_BT_SUPPORTED || SOC_WIFI_SUPPORTED
#endif //#if !SOC_IEEE802154_BLE_ONLY
#if CONFIG_ESP_WIFI_ENABLED
void wifi_module_enable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
modem_clock_module_enable(PERIPH_WIFI_MODULE);
#else
portENTER_CRITICAL_SAFE(&periph_spinlock);
periph_ll_wifi_module_enable_clk_clear_rst();
portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}
void wifi_module_disable(void)
{
#if SOC_MODEM_CLOCK_IS_INDEPENDENT
modem_clock_module_disable(PERIPH_WIFI_MODULE);
#else
portENTER_CRITICAL_SAFE(&periph_spinlock);
periph_ll_wifi_module_disable_clk_set_rst();
portEXIT_CRITICAL_SAFE(&periph_spinlock);
#endif
}
#endif // CONFIG_ESP_WIFI_ENABLED