Historia

qiyueixa 68ff628927 mesh: update libs 1. add APIs to set/get announce interval values. 2. add API to enable/disable the min rate to 6Mbps for data packages. 3. add APIs to set/get RSSI threshold values. 4. fix ap_loss.		2018-06-25 21:47:53 +08:00
..
main	mesh: update libs	2018-06-25 21:47:53 +08:00
Makefile	mesh: update mesh libs	2018-06-15 20:34:49 +08:00
README.md	mesh: update mesh libs	2018-06-15 20:34:49 +08:00

README.md

Mesh Internal Communication Example

This example demonstrates how to use the mesh APIs to set up a mesh network, send and receive messages over the mesh network and etc.

Features Demonstrated

mesh initialization
mesh configuration
mesh start
mesh event handler
root send and receive
other nodes receive

Run make menuconfig to configure the mesh network channel, router SSID, router password and mesh softAP settings.

When the mesh network is established and if you happen to run this example on ESP-WROVER-KIT boards, the RGB light indicator will show you on which layer devices are. The pink reprents root; the yellow reprents layer 2; the red reprents layer 3; the blue reprents layer 4; the green reprents layer 5; the white reprents layer greater than 5. Root continuously sends an On / Off control message to all devices in its routing table. Devices including root itself receive this message and do the On / Off.