esp-idf/components/hal/uart_hal.c

186 wiersze
5.5 KiB
C

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// The HAL layer for UART (common part)
#include "hal/uart_hal.h"
void uart_hal_set_sclk(uart_hal_context_t *hal, uart_sclk_t sclk)
{
uart_ll_set_sclk(hal->dev, sclk);
}
void uart_hal_get_sclk(uart_hal_context_t *hal, uart_sclk_t *sclk)
{
uart_ll_get_sclk(hal->dev, sclk);
}
void uart_hal_set_baudrate(uart_hal_context_t *hal, uint32_t baud_rate)
{
uart_ll_set_baudrate(hal->dev, baud_rate);
}
void uart_hal_get_baudrate(uart_hal_context_t *hal, uint32_t *baud_rate)
{
*baud_rate = uart_ll_get_baudrate(hal->dev);
}
void uart_hal_set_stop_bits(uart_hal_context_t *hal, uart_stop_bits_t stop_bit)
{
uart_ll_set_stop_bits(hal->dev, stop_bit);
}
void uart_hal_get_stop_bits(uart_hal_context_t *hal, uart_stop_bits_t *stop_bit)
{
uart_ll_get_stop_bits(hal->dev, stop_bit);
}
void uart_hal_set_data_bit_num(uart_hal_context_t *hal, uart_word_length_t data_bit)
{
uart_ll_set_data_bit_num(hal->dev, data_bit);
}
void uart_hal_get_data_bit_num(uart_hal_context_t *hal, uart_word_length_t *data_bit)
{
uart_ll_get_data_bit_num(hal->dev, data_bit);
}
void uart_hal_set_parity(uart_hal_context_t *hal, uart_parity_t parity_mode)
{
uart_ll_set_parity(hal->dev, parity_mode);
}
void uart_hal_get_parity(uart_hal_context_t *hal, uart_parity_t *parity_mode)
{
uart_ll_get_parity(hal->dev, parity_mode);
}
void uart_hal_set_hw_flow_ctrl(uart_hal_context_t *hal, uart_hw_flowcontrol_t flow_ctrl, uint8_t rx_thresh)
{
uart_ll_set_hw_flow_ctrl(hal->dev, flow_ctrl, rx_thresh);
}
void uart_hal_get_hw_flow_ctrl(uart_hal_context_t *hal, uart_hw_flowcontrol_t *flow_ctrl)
{
uart_ll_get_hw_flow_ctrl(hal->dev, flow_ctrl);
}
void uart_hal_set_sw_flow_ctrl(uart_hal_context_t *hal, uart_sw_flowctrl_t *flow_ctrl, bool sw_flow_ctrl_en)
{
uart_ll_set_sw_flow_ctrl(hal->dev, flow_ctrl, sw_flow_ctrl_en);
}
void uart_hal_set_at_cmd_char(uart_hal_context_t *hal, uart_at_cmd_t *at_cmd)
{
uart_ll_set_at_cmd_char(hal->dev, at_cmd);
}
void uart_hal_set_tx_idle_num(uart_hal_context_t *hal, uint16_t idle_num)
{
uart_ll_set_tx_idle_num(hal->dev, idle_num);
}
void uart_hal_set_dtr(uart_hal_context_t *hal, int active_level)
{
uart_ll_set_dtr_active_level(hal->dev, active_level);
}
void uart_hal_set_rxfifo_full_thr(uart_hal_context_t *hal, uint32_t full_thrhd)
{
uart_ll_set_rxfifo_full_thr(hal->dev, full_thrhd);
}
void uart_hal_set_txfifo_empty_thr(uart_hal_context_t *hal, uint32_t empty_thrhd)
{
uart_ll_set_txfifo_empty_thr(hal->dev, empty_thrhd);
}
void uart_hal_set_wakeup_thrd(uart_hal_context_t *hal, uint32_t wakeup_thrd)
{
uart_ll_set_wakeup_thrd(hal->dev, wakeup_thrd);
}
void uart_hal_get_wakeup_thrd(uart_hal_context_t *hal, uint32_t *wakeup_thrd)
{
*wakeup_thrd = uart_ll_get_wakeup_thrd(hal->dev);
}
void uart_hal_set_mode(uart_hal_context_t *hal, uart_mode_t mode)
{
uart_ll_set_mode(hal->dev, mode);
}
bool uart_hal_is_hw_rts_en(uart_hal_context_t *hal)
{
return uart_ll_is_hw_rts_en(hal->dev);
}
void uart_hal_inverse_signal(uart_hal_context_t *hal, uint32_t inv_mask)
{
uart_ll_inverse_signal(hal->dev, inv_mask);
}
void uart_hal_set_loop_back(uart_hal_context_t *hal, bool loop_back_en)
{
uart_ll_set_loop_back(hal->dev, loop_back_en);
}
void uart_hal_init(uart_hal_context_t *hal, int uart_num)
{
// Set default clock source
uart_ll_set_sclk(hal->dev, UART_SCLK_APB);
// Set default baud: 115200, use APB clock.
const uint32_t baud_def = 115200;
uart_ll_set_baudrate(hal->dev, baud_def);
// Set UART mode.
uart_ll_set_mode(hal->dev, UART_MODE_UART);
// Disable UART parity
uart_ll_set_parity(hal->dev, UART_PARITY_DISABLE);
// 8-bit world
uart_ll_set_data_bit_num(hal->dev, UART_DATA_8_BITS);
// 1-bit stop bit
uart_ll_set_stop_bits(hal->dev, UART_STOP_BITS_1);
// Set tx idle
uart_ll_set_tx_idle_num(hal->dev, 0);
// Disable hw-flow control
uart_ll_set_hw_flow_ctrl(hal->dev, UART_HW_FLOWCTRL_DISABLE, 100);
}
uint8_t uart_hal_get_symb_len(uart_hal_context_t *hal)
{
uint8_t symbol_len = 1; // number of bits per symbol including start
uart_parity_t parity_mode;
uart_stop_bits_t stop_bit;
uart_word_length_t data_bit;
uart_ll_get_data_bit_num(hal->dev, &data_bit);
uart_ll_get_stop_bits(hal->dev, &stop_bit);
uart_ll_get_parity(hal->dev, &parity_mode);
symbol_len += (data_bit < UART_DATA_BITS_MAX) ? (uint8_t)data_bit + 5 : 8;
symbol_len += (stop_bit > UART_STOP_BITS_1) ? 2 : 1;
symbol_len += (parity_mode > UART_PARITY_DISABLE) ? 1 : 0;
return symbol_len;
}
void uart_hal_set_rx_timeout(uart_hal_context_t *hal, const uint8_t tout)
{
uint8_t symb_len = uart_hal_get_symb_len(hal);
uart_ll_set_rx_tout(hal->dev, symb_len * tout);
}
uint16_t uart_hal_get_max_rx_timeout_thrd(uart_hal_context_t *hal)
{
uint8_t symb_len = uart_hal_get_symb_len(hal);
uint16_t max_tout_thresh = uart_ll_max_tout_thrd(hal->dev);
return (max_tout_thresh / symb_len);
}