kopia lustrzana https://github.com/espressif/esp-idf
545 wiersze
23 KiB
Plaintext
545 wiersze
23 KiB
Plaintext
|
|
menu "Wi-Fi"
|
|
visible if !IDF_TARGET_ESP32H4
|
|
|
|
config ESP_WIFI_ENABLED
|
|
bool
|
|
default y if SOC_WIFI_SUPPORTED
|
|
|
|
config ESP_WIFI_STATIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi static RX buffers"
|
|
range 2 25 if !SOC_WIFI_HE_SUPPORT
|
|
range 2 128 if SOC_WIFI_HE_SUPPORT
|
|
default 10 if !SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
default 16 if SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
help
|
|
Set the number of WiFi static RX buffers. Each buffer takes approximately 1.6KB of RAM.
|
|
The static rx buffers are allocated when esp_wifi_init is called, they are not freed
|
|
until esp_wifi_deinit is called.
|
|
|
|
WiFi hardware use these buffers to receive all 802.11 frames.
|
|
A higher number may allow higher throughput but increases memory use. If ESP_WIFI_AMPDU_RX_ENABLED
|
|
is enabled, this value is recommended to set equal or bigger than ESP_WIFI_RX_BA_WIN in order to
|
|
achieve better throughput and compatibility with both stations and APs.
|
|
|
|
config ESP_WIFI_DYNAMIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic RX buffers"
|
|
range 0 128 if !LWIP_WND_SCALE
|
|
range 0 1024 if LWIP_WND_SCALE
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic RX buffers, 0 means unlimited RX buffers will be allocated
|
|
(provided sufficient free RAM). The size of each dynamic RX buffer depends on the size of
|
|
the received data frame.
|
|
|
|
For each received data frame, the WiFi driver makes a copy to an RX buffer and then delivers
|
|
it to the high layer TCP/IP stack. The dynamic RX buffer is freed after the higher layer has
|
|
successfully received the data frame.
|
|
|
|
For some applications, WiFi data frames may be received faster than the application can
|
|
process them. In these cases we may run out of memory if RX buffer number is unlimited (0).
|
|
|
|
If a dynamic RX buffer limit is set, it should be at least the number of static RX buffers.
|
|
|
|
choice ESP_WIFI_TX_BUFFER
|
|
prompt "Type of WiFi TX buffers"
|
|
default ESP_WIFI_DYNAMIC_TX_BUFFER
|
|
help
|
|
Select type of WiFi TX buffers:
|
|
|
|
If "Static" is selected, WiFi TX buffers are allocated when WiFi is initialized and released
|
|
when WiFi is de-initialized. The size of each static TX buffer is fixed to about 1.6KB.
|
|
|
|
If "Dynamic" is selected, each WiFi TX buffer is allocated as needed when a data frame is
|
|
delivered to the Wifi driver from the TCP/IP stack. The buffer is freed after the data frame
|
|
has been sent by the WiFi driver. The size of each dynamic TX buffer depends on the length
|
|
of each data frame sent by the TCP/IP layer.
|
|
|
|
If PSRAM is enabled, "Static" should be selected to guarantee enough WiFi TX buffers.
|
|
If PSRAM is disabled, "Dynamic" should be selected to improve the utilization of RAM.
|
|
|
|
config ESP_WIFI_STATIC_TX_BUFFER
|
|
bool "Static"
|
|
config ESP_WIFI_DYNAMIC_TX_BUFFER
|
|
bool "Dynamic"
|
|
depends on !SPIRAM_USE_MALLOC
|
|
endchoice
|
|
|
|
config ESP_WIFI_TX_BUFFER_TYPE
|
|
int
|
|
default 0 if ESP_WIFI_STATIC_TX_BUFFER
|
|
default 1 if ESP_WIFI_DYNAMIC_TX_BUFFER
|
|
|
|
config ESP_WIFI_STATIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi static TX buffers"
|
|
depends on ESP_WIFI_STATIC_TX_BUFFER
|
|
range 1 64
|
|
default 16
|
|
help
|
|
Set the number of WiFi static TX buffers. Each buffer takes approximately 1.6KB of RAM.
|
|
The static RX buffers are allocated when esp_wifi_init() is called, they are not released
|
|
until esp_wifi_deinit() is called.
|
|
|
|
For each transmitted data frame from the higher layer TCP/IP stack, the WiFi driver makes a
|
|
copy of it in a TX buffer. For some applications especially UDP applications, the upper
|
|
layer can deliver frames faster than WiFi layer can transmit. In these cases, we may run out
|
|
of TX buffers.
|
|
|
|
config ESP_WIFI_CACHE_TX_BUFFER_NUM
|
|
int "Max number of WiFi cache TX buffers"
|
|
depends on SPIRAM
|
|
range 16 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi cache TX buffer number.
|
|
|
|
For each TX packet from uplayer, such as LWIP etc, WiFi driver needs to allocate a static TX
|
|
buffer and makes a copy of uplayer packet. If WiFi driver fails to allocate the static TX buffer,
|
|
it caches the uplayer packets to a dedicated buffer queue, this option is used to configure the
|
|
size of the cached TX queue.
|
|
|
|
config ESP_WIFI_DYNAMIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic TX buffers"
|
|
depends on ESP_WIFI_DYNAMIC_TX_BUFFER
|
|
range 1 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic TX buffers. The size of each dynamic TX buffer is not fixed,
|
|
it depends on the size of each transmitted data frame.
|
|
|
|
For each transmitted frame from the higher layer TCP/IP stack, the WiFi driver makes a copy
|
|
of it in a TX buffer. For some applications, especially UDP applications, the upper layer
|
|
can deliver frames faster than WiFi layer can transmit. In these cases, we may run out of TX
|
|
buffers.
|
|
|
|
config ESP_WIFI_CSI_ENABLED
|
|
bool "WiFi CSI(Channel State Information)"
|
|
depends on SOC_WIFI_CSI_SUPPORT
|
|
default n
|
|
help
|
|
Select this option to enable CSI(Channel State Information) feature. CSI takes about
|
|
CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM KB of RAM. If CSI is not used, it is better to disable
|
|
this feature in order to save memory.
|
|
|
|
config ESP_WIFI_AMPDU_TX_ENABLED
|
|
bool "WiFi AMPDU TX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU TX feature
|
|
|
|
|
|
config ESP_WIFI_TX_BA_WIN
|
|
int "WiFi AMPDU TX BA window size"
|
|
depends on ESP_WIFI_AMPDU_TX_ENABLED
|
|
range 2 32 if !SOC_WIFI_HE_SUPPORT
|
|
range 2 64 if SOC_WIFI_HE_SUPPORT
|
|
default 6
|
|
help
|
|
Set the size of WiFi Block Ack TX window. Generally a bigger value means higher throughput but
|
|
more memory. Most of time we should NOT change the default value unless special reason, e.g.
|
|
test the maximum UDP TX throughput with iperf etc. For iperf test in shieldbox, the recommended
|
|
value is 9~12.
|
|
|
|
config ESP_WIFI_AMPDU_RX_ENABLED
|
|
bool "WiFi AMPDU RX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU RX feature
|
|
|
|
config ESP_WIFI_RX_BA_WIN
|
|
int "WiFi AMPDU RX BA window size"
|
|
depends on ESP_WIFI_AMPDU_RX_ENABLED
|
|
range 2 32 if !SOC_WIFI_HE_SUPPORT
|
|
range 2 64 if SOC_WIFI_HE_SUPPORT
|
|
default 6 if !SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
default 16 if SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
help
|
|
Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput and better
|
|
compatibility but more memory. Most of time we should NOT change the default value unless special
|
|
reason, e.g. test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the
|
|
recommended value is 9~12. If PSRAM is used and WiFi memory is prefered to allocat in PSRAM first,
|
|
the default and minimum value should be 16 to achieve better throughput and compatibility with both
|
|
stations and APs.
|
|
|
|
config ESP_WIFI_AMSDU_TX_ENABLED
|
|
bool "WiFi AMSDU TX"
|
|
depends on SPIRAM
|
|
default n
|
|
help
|
|
Select this option to enable AMSDU TX feature
|
|
|
|
config ESP_WIFI_NVS_ENABLED
|
|
bool "WiFi NVS flash"
|
|
default y
|
|
help
|
|
Select this option to enable WiFi NVS flash
|
|
|
|
choice ESP_WIFI_TASK_CORE_ID
|
|
depends on !FREERTOS_UNICORE
|
|
prompt "WiFi Task Core ID"
|
|
default ESP_WIFI_TASK_PINNED_TO_CORE_0
|
|
help
|
|
Pinned WiFi task to core 0 or core 1.
|
|
|
|
config ESP_WIFI_TASK_PINNED_TO_CORE_0
|
|
bool "Core 0"
|
|
config ESP_WIFI_TASK_PINNED_TO_CORE_1
|
|
bool "Core 1"
|
|
endchoice
|
|
|
|
config ESP_WIFI_SOFTAP_BEACON_MAX_LEN
|
|
int "Max length of WiFi SoftAP Beacon"
|
|
range 752 1256
|
|
default 752
|
|
help
|
|
ESP-MESH utilizes beacon frames to detect and resolve root node conflicts (see documentation). However the
|
|
default length of a beacon frame can simultaneously hold only five root node identifier structures,
|
|
meaning that a root node conflict of up to five nodes can be detected at one time. In the occurence of
|
|
more root nodes conflict involving more than five root nodes, the conflict resolution process will detect
|
|
five of the root nodes, resolve the conflict, and re-detect more root nodes. This process will repeat
|
|
until all root node conflicts are resolved. However this process can generally take a very long time.
|
|
|
|
To counter this situation, the beacon frame length can be increased such that more root nodes can be
|
|
detected simultaneously. Each additional root node will require 36 bytes and should be added ontop of the
|
|
default beacon frame length of
|
|
752 bytes. For example, if you want to detect 10 root nodes simultaneously, you need to set the beacon
|
|
frame length as
|
|
932 (752+36*5).
|
|
|
|
Setting a longer beacon length also assists with debugging as the conflicting root nodes can be identified
|
|
more quickly.
|
|
|
|
config ESP_WIFI_MGMT_SBUF_NUM
|
|
int "WiFi mgmt short buffer number"
|
|
range 6 32
|
|
default 32
|
|
help
|
|
Set the number of WiFi management short buffer.
|
|
|
|
config ESP_WIFI_IRAM_OPT
|
|
bool "WiFi IRAM speed optimization"
|
|
default n if (BT_ENABLED && SPIRAM && IDF_TARGET_ESP32)
|
|
default y
|
|
help
|
|
Select this option to place frequently called Wi-Fi library functions in IRAM.
|
|
When this option is disabled, more than 10Kbytes of IRAM memory will be saved
|
|
but Wi-Fi throughput will be reduced.
|
|
|
|
config ESP_WIFI_RX_IRAM_OPT
|
|
bool "WiFi RX IRAM speed optimization"
|
|
default n if (BT_ENABLED && SPIRAM && IDF_TARGET_ESP32)
|
|
default y
|
|
help
|
|
Select this option to place frequently called Wi-Fi library RX functions in IRAM.
|
|
When this option is disabled, more than 17Kbytes of IRAM memory will be saved
|
|
but Wi-Fi performance will be reduced.
|
|
|
|
config ESP_WIFI_ENABLE_WPA3_SAE
|
|
bool "Enable WPA3-Personal"
|
|
default y
|
|
depends on ESP_WIFI_MBEDTLS_CRYPTO
|
|
help
|
|
Select this option to allow the device to establish a WPA3-Personal connection with eligible AP's.
|
|
PMF (Protected Management Frames) is a prerequisite feature for a WPA3 connection, it needs to be
|
|
explicitly configured before attempting connection. Please refer to the Wi-Fi Driver API Guide for details.
|
|
|
|
config ESP_WIFI_ENABLE_SAE_PK
|
|
bool "Enable SAE-PK"
|
|
default y
|
|
depends on ESP_WIFI_ENABLE_WPA3_SAE
|
|
help
|
|
Select this option to enable SAE-PK
|
|
|
|
config ESP_WIFI_SOFTAP_SAE_SUPPORT
|
|
bool "Enable WPA3 Personal(SAE) SoftAP"
|
|
default y
|
|
depends on ESP_WIFI_ENABLE_WPA3_SAE
|
|
depends on ESP_WIFI_SOFTAP_SUPPORT
|
|
help
|
|
Select this option to enable SAE support in softAP mode.
|
|
|
|
config ESP_WIFI_ENABLE_WPA3_OWE_STA
|
|
bool "Enable OWE STA"
|
|
default y
|
|
select ESP_WIFI_MBEDTLS_CRYPTO
|
|
help
|
|
Select this option to allow the device to establish OWE connection with eligible AP's.
|
|
PMF (Protected Management Frames) is a prerequisite feature for a WPA3 connection, it needs to be
|
|
explicitly configured before attempting connection. Please refer to the Wi-Fi Driver API Guide for details.
|
|
|
|
config ESP_WIFI_SLP_IRAM_OPT
|
|
bool "WiFi SLP IRAM speed optimization"
|
|
select PM_SLP_DEFAULT_PARAMS_OPT
|
|
select PERIPH_CTRL_FUNC_IN_IRAM
|
|
help
|
|
Select this option to place called Wi-Fi library TBTT process and receive beacon functions in IRAM.
|
|
Some functions can be put in IRAM either by ESP_WIFI_IRAM_OPT and ESP_WIFI_RX_IRAM_OPT, or this one.
|
|
If already enabled ESP_WIFI_IRAM_OPT, the other 7.3KB IRAM memory would be taken by this option.
|
|
If already enabled ESP_WIFI_RX_IRAM_OPT, the other 1.3KB IRAM memory would be taken by this option.
|
|
If neither of them are enabled, the other 7.4KB IRAM memory would be taken by this option.
|
|
Wi-Fi power-save mode average current would be reduced if this option is enabled.
|
|
|
|
config ESP_WIFI_SLP_DEFAULT_MIN_ACTIVE_TIME
|
|
int "Minimum active time"
|
|
range 8 60
|
|
default 50
|
|
depends on ESP_WIFI_SLP_IRAM_OPT
|
|
help
|
|
The minimum timeout for waiting to receive data, unit: milliseconds.
|
|
|
|
config ESP_WIFI_SLP_DEFAULT_MAX_ACTIVE_TIME
|
|
int "Maximum keep alive time"
|
|
range 10 60
|
|
default 10
|
|
depends on ESP_WIFI_SLP_IRAM_OPT
|
|
help
|
|
The maximum time that wifi keep alive, unit: seconds.
|
|
|
|
config ESP_WIFI_FTM_ENABLE
|
|
bool "WiFi FTM"
|
|
default n
|
|
depends on SOC_WIFI_FTM_SUPPORT
|
|
help
|
|
Enable feature Fine Timing Measurement for calculating WiFi Round-Trip-Time (RTT).
|
|
|
|
config ESP_WIFI_FTM_INITIATOR_SUPPORT
|
|
bool "FTM Initiator support"
|
|
default y
|
|
depends on ESP_WIFI_FTM_ENABLE
|
|
|
|
config ESP_WIFI_FTM_RESPONDER_SUPPORT
|
|
bool "FTM Responder support"
|
|
default y
|
|
depends on ESP_WIFI_FTM_ENABLE
|
|
|
|
config ESP_WIFI_STA_DISCONNECTED_PM_ENABLE
|
|
bool "Power Management for station at disconnected"
|
|
default y
|
|
help
|
|
Select this option to enable power_management for station when disconnected.
|
|
Chip will do modem-sleep when rf module is not in use any more.
|
|
|
|
config ESP_WIFI_GCMP_SUPPORT
|
|
bool "WiFi GCMP Support(GCMP128 and GCMP256)"
|
|
default n
|
|
depends on SOC_WIFI_GCMP_SUPPORT
|
|
help
|
|
Select this option to enable GCMP support. GCMP support is compulsory for WiFi Suite-B support.
|
|
|
|
config ESP_WIFI_GMAC_SUPPORT
|
|
bool "WiFi GMAC Support(GMAC128 and GMAC256)"
|
|
default n
|
|
help
|
|
Select this option to enable GMAC support. GMAC support is compulsory for WiFi 192 bit certification.
|
|
|
|
config ESP_WIFI_SOFTAP_SUPPORT
|
|
bool "WiFi SoftAP Support"
|
|
default y
|
|
help
|
|
WiFi module can be compiled without SoftAP to save code size.
|
|
|
|
config ESP_WIFI_ENHANCED_LIGHT_SLEEP
|
|
bool "WiFi modem automatically receives the beacon"
|
|
default n
|
|
depends on ESP_PHY_MAC_BB_PD && SOC_PM_SUPPORT_BEACON_WAKEUP
|
|
help
|
|
The wifi modem automatically receives the beacon frame during light sleep.
|
|
|
|
config ESP_WIFI_SLP_BEACON_LOST_OPT
|
|
bool "Wifi sleep optimize when beacon lost"
|
|
help
|
|
Enable wifi sleep optimization when beacon loss occurs and immediately enter
|
|
sleep mode when the WiFi module detects beacon loss.
|
|
|
|
config ESP_WIFI_SLP_BEACON_LOST_TIMEOUT
|
|
int "Beacon loss timeout"
|
|
range 5 100
|
|
default 10
|
|
depends on ESP_WIFI_SLP_BEACON_LOST_OPT
|
|
help
|
|
Timeout time for close rf phy when beacon loss occurs, Unit: 1024 microsecond.
|
|
|
|
config ESP_WIFI_SLP_BEACON_LOST_THRESHOLD
|
|
int "Maximum number of consecutive lost beacons allowed"
|
|
range 0 8
|
|
default 3
|
|
depends on ESP_WIFI_SLP_BEACON_LOST_OPT
|
|
help
|
|
Maximum number of consecutive lost beacons allowed, WiFi keeps Rx state when
|
|
the number of consecutive beacons lost is greater than the given threshold.
|
|
|
|
config ESP_WIFI_SLP_PHY_ON_DELTA_EARLY_TIME
|
|
int "Delta early time for RF PHY on"
|
|
range 0 100
|
|
default 2
|
|
depends on ESP_WIFI_SLP_BEACON_LOST_OPT && SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW
|
|
help
|
|
Delta early time for rf phy on, When the beacon is lost, the next rf phy on will
|
|
be earlier the time specified by the configuration item, Unit: 32 microsecond.
|
|
|
|
config ESP_WIFI_SLP_PHY_OFF_DELTA_TIMEOUT_TIME
|
|
int "Delta timeout time for RF PHY off"
|
|
range 0 8
|
|
default 2
|
|
depends on ESP_WIFI_SLP_BEACON_LOST_OPT && SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW
|
|
help
|
|
Delta timeout time for rf phy off, When the beacon is lost, the next rf phy off will
|
|
be delayed for the time specified by the configuration item. Unit: 1024 microsecond.
|
|
|
|
config ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM
|
|
int "Maximum espnow encrypt peers number"
|
|
range 0 4 if IDF_TARGET_ESP32C2
|
|
range 0 17 if (!IDF_TARGET_ESP32C2)
|
|
default 2 if IDF_TARGET_ESP32C2
|
|
default 7 if (!IDF_TARGET_ESP32C2)
|
|
help
|
|
Maximum number of encrypted peers supported by espnow.
|
|
The number of hardware keys for encryption is fixed. And the espnow and SoftAP share the same
|
|
hardware keys. So this configuration will affect the maximum connection number of SoftAP.
|
|
Maximum espnow encrypted peers number + maximum number of connections of SoftAP = Max hardware keys number.
|
|
|
|
When using ESP mesh, this value should be set to a maximum of 6.
|
|
|
|
config ESP_WIFI_ENABLE_WIFI_TX_STATS
|
|
bool "Enable Wi-Fi transmission statistics"
|
|
depends on SOC_WIFI_HE_SUPPORT
|
|
default "y"
|
|
help
|
|
Enable Wi-Fi transmission statistics. Total support 4 access category. Each access category
|
|
will use 346 bytes memory.
|
|
|
|
config ESP_WIFI_MBEDTLS_CRYPTO
|
|
bool "Use MbedTLS crypto APIs"
|
|
default y
|
|
select MBEDTLS_AES_C
|
|
select MBEDTLS_ECP_C
|
|
select MBEDTLS_ECDH_C
|
|
select MBEDTLS_ECDSA_C
|
|
select MBEDTLS_TLS_ENABLED
|
|
help
|
|
Select this option to use MbedTLS crypto APIs which utilize hardware acceleration.
|
|
|
|
if ESP_WIFI_MBEDTLS_CRYPTO
|
|
config ESP_WIFI_MBEDTLS_TLS_CLIENT
|
|
bool "Use MbedTLS TLS client for WiFi Enterprise connection"
|
|
default y
|
|
select MBEDTLS_TLS_ENABLED
|
|
help
|
|
Select this option to use MbedTLS TLS client for WPA2 enterprise connection.
|
|
Please note that from MbedTLS-3.0 onwards, MbedTLS does not support SSL-3.0
|
|
TLS-v1.0, TLS-v1.1 versions. Incase your server is using one of these version,
|
|
it is advisable to update your server.
|
|
Please disable this option for compatibilty with older TLS versions.
|
|
endif
|
|
|
|
config ESP_WIFI_WAPI_PSK
|
|
bool "Enable WAPI PSK support"
|
|
depends on SOC_WIFI_WAPI_SUPPORT
|
|
default n
|
|
help
|
|
Select this option to enable WAPI-PSK
|
|
which is a Chinese National Standard Encryption for Wireless LANs (GB 15629.11-2003).
|
|
|
|
config ESP_WIFI_SUITE_B_192
|
|
bool "Enable NSA suite B support with 192 bit key"
|
|
default n
|
|
select ESP_WIFI_GCMP_SUPPORT
|
|
select ESP_WIFI_GMAC_SUPPORT
|
|
help
|
|
Select this option to enable 192 bit NSA suite-B.
|
|
This is necessary to support WPA3 192 bit security.
|
|
|
|
config ESP_WIFI_WPS_STRICT
|
|
bool "Strictly validate all WPS attributes"
|
|
default n
|
|
help
|
|
Select this option to enable validate each WPS attribute
|
|
rigorously. Disabling this add the workaorunds with various APs.
|
|
Enabling this may cause inter operability issues with some APs.
|
|
|
|
config ESP_WIFI_11KV_SUPPORT
|
|
bool "Enable 802.11k, 802.11v APIs Support"
|
|
default n
|
|
help
|
|
Select this option to enable 802.11k 802.11v APIs(RRM and BTM support).
|
|
Only APIs which are helpful for network assisted roaming
|
|
are supported for now.
|
|
Enable this option with BTM and RRM enabled in sta config
|
|
to make device ready for network assisted roaming.
|
|
BTM: BSS transition management enables an AP to request a station to transition
|
|
to a specific AP, or to indicate to a station a set of preferred APs.
|
|
RRM: Radio measurements enable STAs to understand the radio environment,
|
|
it enables STAs to observe and gather data on radio link performance
|
|
and on the radio environment. Current implementation adds beacon report,
|
|
link measurement, neighbor report.
|
|
|
|
config ESP_WIFI_SCAN_CACHE
|
|
bool "Keep scan results in cache"
|
|
depends on ESP_WIFI_11KV_SUPPORT
|
|
default n
|
|
help
|
|
Keep scan results in cache, if not enabled, those
|
|
will be flushed immediately.
|
|
|
|
config ESP_WIFI_MBO_SUPPORT
|
|
bool "Enable Multi Band Operation Certification Support"
|
|
default n
|
|
select ESP_WIFI_11KV_SUPPORT
|
|
select ESP_WIFI_SCAN_CACHE
|
|
help
|
|
Select this option to enable WiFi Multiband operation certification support.
|
|
|
|
config ESP_WIFI_DPP_SUPPORT
|
|
bool "Enable DPP support"
|
|
default n
|
|
select ESP_WIFI_MBEDTLS_CRYPTO
|
|
help
|
|
Select this option to enable WiFi Easy Connect Support.
|
|
|
|
config ESP_WIFI_11R_SUPPORT
|
|
bool "Enable 802.11R (Fast Transition) Support"
|
|
default n
|
|
help
|
|
Select this option to enable WiFi Fast Transition Support.
|
|
|
|
config ESP_WIFI_WPS_SOFTAP_REGISTRAR
|
|
bool "Add WPS Registrar support in SoftAP mode"
|
|
depends on ESP_WIFI_SOFTAP_SUPPORT
|
|
default n
|
|
help
|
|
Select this option to enable WPS registrar support in softAP mode.
|
|
|
|
config ESP_WIFI_ENABLE_WIFI_RX_STATS
|
|
bool "Enable Wi-Fi reception statistics"
|
|
depends on SOC_WIFI_HE_SUPPORT
|
|
default "y"
|
|
help
|
|
Enable Wi-Fi reception statistics. Total support 2 access category. Each access category
|
|
will use 190 bytes memory.
|
|
|
|
config ESP_WIFI_ENABLE_WIFI_RX_MU_STATS
|
|
bool "Enable Wi-Fi DL MU-MIMO and DL OFDMA reception statistics"
|
|
depends on ESP_WIFI_ENABLE_WIFI_RX_STATS
|
|
default "y"
|
|
help
|
|
Enable Wi-Fi DL MU-MIMO and DL OFDMA reception statistics. Will use 10932 bytes memory.
|
|
|
|
config ESP_WIFI_DEBUG_PRINT
|
|
bool "Print debug messages from WPA Supplicant"
|
|
default n
|
|
help
|
|
Select this option to print logging information from WPA supplicant,
|
|
this includes handshake information and key hex dumps depending
|
|
on the project logging level.
|
|
|
|
Enabling this could increase the build size ~60kb
|
|
depending on the project logging level.
|
|
|
|
config ESP_WIFI_TESTING_OPTIONS
|
|
bool "Add DPP testing code"
|
|
default n
|
|
help
|
|
Select this to enable unity test for DPP.
|
|
|
|
endmenu # Wi-Fi
|