esp-idf/examples/peripherals/secure_element/atecc608_ecdsa
Mahavir Jain 7c28b44950
examples/secure_element: add component manifest file for cryptoauthlib
2022-08-12 11:24:03 +05:30
..
main examples/secure_element: add component manifest file for cryptoauthlib 2022-08-12 11:24:03 +05:30
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
README.md Examples README's updated on peripherals, system and wifi 2021-04-07 14:24:38 +00:00
sdkconfig.defaults secure_element: atecc608_ecdsa example 2020-05-21 13:08:30 +05:30

README.md

Supported Targets ESP32

ECDSA sign/verify Example with ESP32-WROOM-32SE

Description

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example requires ESP32-WROOM-32SE which has Microchip's ATECC608A (Secure Element) integrated on the module.

The example performs ECDSA sign/verify functions on sample data using hardware private key stored in ATECC608A chip. If you want to use bare ATECC608A chip (Secure Element) with ESP32-WROOM-32 module by making external connections, please refer this for details.

How to use example

Before project configuration and build, be sure to set the correct chip target using idf.py set-target <chip_name>.

Hardware Required

To get started you will need a ESP32-WROOM-32SE development board which integrates Microchips ATECC608A CryptoAuth chip in the module.

  • A development board with ESP32-WROOM-32SE SoC or an custom board with the ATECC608A IC.
  • A USB cable for Power supply and programming

Configure the project

ATECC608A chip on ESP32-WROOM-32SE should be configured to run the example, for details on configuration of ATECC608A chip, please refer esp_cryptoauth_utility

Open the project configuration menu (idf.py menuconfig).

In the Component config -> esp-cryptoauthlib menu:

  • Use Choose the type of ATECC608A chip to set the Crypto IC type [1].
  • Use Enable Hardware ECDSA keys for mbedTLS Enable Hardware ECDSA.
    • Set Enable ATECC608A sign operations in mbedTLS to use Hardware ECDSA sign.
    • Set Enable ATECC608A verify operations in mbedTLS to use Hardware ECDSA verify.
  • Set I2C SDA pin used to communicate with the ATECC608A.
  • Set I2C SCL pin used to communicate with the ATECC608A.

[1]: for more details refer Find ATECC608A chip type.

Build and Flash

Build the project and flash it to the board, then run the monitor tool to view the serial output:

Run idf.py -p PORT flash monitor to build, flash and monitor the project.

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for all the steps to configure and use the ESP-IDF to build projects.

Troubleshooting

For any technical queries, please open an issue on GitHub. We will get back to you soon.