Historia

zhangwenxu d29f31ec16 docs(openthread): update openthread README for H2 and C6		2023-07-12 15:57:25 +08:00
..
main	openthread: change partition table to nvs flash	2023-06-14 16:34:54 +08:00
CMakeLists.txt	tools: Increase the minimal supported CMake version to 3.16	2022-06-01 06:35:02 +00:00
README.md	docs(openthread): update openthread README for H2 and C6	2023-07-12 15:57:25 +08:00
partitions.csv	openthread: change partition table to nvs flash	2023-06-14 16:34:54 +08:00
sdkconfig.ci.rcp	openthread:add openthread CI	2022-09-16 14:07:31 +08:00
sdkconfig.defaults	openthread: enable HW AES in ot_cli example	2023-06-13 10:09:38 +08:00

README.md

Supported Targets	ESP32-C6	ESP32-H2

OpenThread Radio Co-Processor (RCP) Example

This example demonstrates an OpenThread Radio Co-Processor.

OpenThread RCP doesn't function alone, it needs to work together with a Host and this example covers two common user scenarios:

Work with a Host Processor to perform a Thread Border Router.
Work as a Thread Sniffer.

How to use example

Hardware Required

To run this example, a board with IEEE 802.15.4 module (for example ESP32-H2) is required.

Configure the project

The default communication interface is port 0 of ESP32-H2 UART running at 460800 baud, change the configuration in esp_ot_config.h if you want to use another interface or need different communication parameters.

Build and Flash

Build the project and flash it to the board:

idf.py -p <PORT> build flash

Now you'll get an OpenThread RCP, you can try the following use cases:

Thread Border Router

Please refer to ot_br example for the setup steps.

Thread Sniffer

Please refer to Thread Sniffer for the detailed instructions.