mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/components/openthread/include/esp_radio_spinel.h

396 wiersze
13 KiB
C
Czysty Wina Historia

/*
* SPDX-FileCopyrightText: 2021-2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#ifdef __cplusplus
extern "C" {
#endif
#include <sys/select.h>
#include "esp_ieee802154_types.h"
#include "driver/uart.h"
#include "soc/gpio_num.h"
#define ESP_SPINEL_LOG_TAG "ESP_RADIO_SPINEL"
#define SPINEL_PROP_VENDOR_ESP_SET_COORDINATOR (SPINEL_PROP_VENDOR_ESP__BEGIN + 1) /* Vendor command for coordinator.*/
#define SPINEL_PROP_VENDOR_ESP_SET_PENDINGMODE (SPINEL_PROP_VENDOR_ESP__BEGIN + 2) /* Vendor command for pending mode.*/
typedef enum {
ESP_RADIO_SPINEL_ZIGBEE = 0x0, /* The index of Zigbee.*/
ESP_RADIO_SPINEL_OPENTHREAD = 0x1, /* The index of OpenThread.*/
ESP_RADIO_SPINEL_MAX,
} esp_radio_spinel_idx_t; /* The index of 802.15.4 related protocol stack for ESP radio spinel.*/
typedef struct {
fd_set read_fds; /* The read file descriptors.*/
fd_set write_fds; /* The write file descriptors.*/
fd_set error_fds; /* The error file descriptors.*/
int max_fd; /* The max file descriptor.*/
struct timeval timeout; /* The timeout.*/
} esp_radio_spinel_mainloop_context_t;
typedef struct {
uart_port_t port; /*!< UART port number */
uart_config_t uart_config; /*!< UART configuration, see uart_config_t docs */
gpio_num_t rx_pin; /*!< UART RX pin */
gpio_num_t tx_pin; /*!< UART TX pin */
} esp_radio_spinel_uart_config_t; /*This structure represents a context for ESP radio spinel. */
typedef void (*esp_radio_spinel_rcp_failure_handler)(void); /* The handler for rcp failure.*/
typedef esp_err_t (*esp_radio_spinel_uart_init_handler)(const esp_radio_spinel_uart_config_t *uart_config_t, int *uart_fd); /* The handler for UART initialization.*/
typedef esp_err_t (*esp_radio_spinel_uart_deinit_handler)(const esp_radio_spinel_uart_config_t *uart_config_t, int *uart_fd); /* The handler for UART deinitialization.*/
typedef struct
{
void (*receive_done)(const uint8_t *frame, esp_ieee802154_frame_info_t *frame_info); /* Callback for Receive Done.*/
void (*transmit_done)(const uint8_t *frame, const uint8_t *ack, esp_ieee802154_frame_info_t *ack_frame_info); /* Callback for Transmit Done.*/
void (*transmit_failed)(esp_ieee802154_tx_error_t error); /* Callback for Transmit Failed.*/
void (*energy_scan_done)(int8_t max_rssi); /* Callback for Energy Scan Done.*/
void (*transmit_started)(const uint8_t *frame); /* Callback for Transmit Started.*/
void (*switchover_done)(bool success); /* Callback for Switchover Done.*/
#if OPENTHREAD_CONFIG_DIAG_ENABLE
void (*diag_receive_done)(const uint8_t *frame, esp_ieee802154_frame_info_t *frame_info); /* Callback for Receive Done (diag).*/
void (*diag_transmit_done)(const uint8_t *frame, esp_ieee802154_frame_info_t *frame_info); /* Callback for Transmit Done (diag).*/
void (*diag_transmit_failed)(esp_ieee802154_tx_error_t error); /* Callback for Transmit Failed (diag).*/
#endif // OPENTHREAD_CONFIG_DIAG_ENABLE
} esp_radio_spinel_callbacks_t; /* ESP Radio Spinel Callbacks.*/
/**
* @brief Set callkbacks of ESP radio spinel.
*
* @note This function should be called before `esp_radio_spinel_init`.
*
* @param[in] aCallbacks The callbacks struct.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
*/
void esp_radio_spinel_set_callbacks(const esp_radio_spinel_callbacks_t aCallbacks, esp_radio_spinel_idx_t idx);
/**
* @brief Enable the UART interface for ESP radio spinel
*
* @note This function should be called before `esp_radio_spinel_init`.
*
* @param[in] radio_uart_config The config of UART for radio spinel.
* @param[in] aUartInitHandler The function for UART initialization
* @param[in] aUartDeinitHandler The function for UART deinitialization
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_uart_interface_enable(const esp_radio_spinel_uart_config_t *radio_uart_config,
esp_radio_spinel_uart_init_handler aUartInitHandler,
esp_radio_spinel_uart_deinit_handler aUartDeinitHandler,
esp_radio_spinel_idx_t idx);
/**
* @brief Initialize ESP radio spinel.
*
* @note This function should be called after `esp_radio_spinel_set_callbacks` and `esp_radio_spinel_uart_interface_enable`.
*
* @param[in] idx The index of 802.15.4 related protocol stack.
*
*/
void esp_radio_spinel_init(esp_radio_spinel_idx_t idx);
/**
* @brief Enavle ESP radio spinel.
*
* @note This function should be called after `esp_radio_spinel_init`.
*
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_enable(esp_radio_spinel_idx_t idx);
/**
* @brief Set the pending mode.
*
* @param[in] pending_mode The pending mode.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_pending_mode(esp_ieee802154_pending_mode_t pending_mode, esp_radio_spinel_idx_t idx);
/**
* @brief Get the EUI-64.
*
* @param[in] eui64 A pointer to the EUI-64.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_get_eui64(uint8_t *eui64, esp_radio_spinel_idx_t idx);
/**
* @brief Set the panid.
*
* @param[in] panid The panid.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_panid(uint16_t panid, esp_radio_spinel_idx_t idx);
/**
* @brief Set the short address.
*
* @param[in] short_address The short address.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_short_address(uint16_t short_address, esp_radio_spinel_idx_t idx);
/**
* @brief Set the extended address.
*
* @param[in] ext_address The extended address.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_extended_address(uint8_t *ext_address, esp_radio_spinel_idx_t idx);
/**
* @brief Set the coordinator mode.
*
* @param[in] enable Enable or disable the coordinator mode.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_pan_coord(bool enable, esp_radio_spinel_idx_t idx);
/**
* @brief Enable the RCP reception.
*
* @param[in] channel The channel of reception.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_receive(uint8_t channel, esp_radio_spinel_idx_t idx);
/**
* @brief Perform the energy scan.
*
* @param[in] scan_channel The channel of energy scan (usually the range is 11~26, scan all channels if it's set to 0).
* @param[in] scan_duration The duration for energy scan.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_energy_scan(uint8_t scan_channel, uint16_t scan_duration, esp_radio_spinel_idx_t idx);
/**
* @brief Perform the transmission.
*
* @param[in] frame A pointer to the frame.
* @param[in] channel The channel to use for transmitting.
* @param[in] cca Perform clear channel assessment(if it's true) or not(if it's false)
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_transmit(uint8_t *frame, uint8_t channel, bool cca, esp_radio_spinel_idx_t idx);
/**
* @brief Clear all short addresses from the source address match table.
*
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_clear_short_entries(esp_radio_spinel_idx_t idx);
/**
* @brief Add a short address to the source address match table.
*
* @param[in] short_address The short address to be added.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_add_short_entry(uint16_t short_address, esp_radio_spinel_idx_t idx);
/**
* @brief Clear the pending table, remove all extended/long addresses.
*
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_clear_extended_entries(esp_radio_spinel_idx_t idx);
/**
* @brief Add an extended address to the source address match table.
*
* @param[in] ext_address The extended address to be added.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_add_extended_entry(uint8_t *ext_address, esp_radio_spinel_idx_t idx);
/**
* @brief Sets the status of promiscuous mode.
*
* @param[in] enable Whether to enable or disable promiscuous mode.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_promiscuous_mode(bool enable, esp_radio_spinel_idx_t idx);
/**
* @brief Update the ESP radio spinel.
*
* @param[in] mainloop_context The context for ESP radio spinel.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
*/
void esp_radio_spinel_radio_update(esp_radio_spinel_mainloop_context_t *mainloop_context, esp_radio_spinel_idx_t idx);
/**
* @brief Process the ESP radio spinel.
*
* @param[in] mainloop_context The context for ESP radio spinel.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
*/
void esp_radio_spinel_radio_process(esp_radio_spinel_mainloop_context_t *mainloop_context, esp_radio_spinel_idx_t idx);
/**
* @brief Switch the radio state to Sleep.
*
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_sleep(esp_radio_spinel_idx_t idx);
/**
* @brief Set the radio's transmit power in dBm.
*
* @param[in] power The transmit power in dBm.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_set_tx_power(int8_t power, esp_radio_spinel_idx_t idx);
/**
* @brief Get the radio's transmit power in dBm.
*
* @param[in] power A pointer to the transmit power.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_get_tx_power(int8_t *power, esp_radio_spinel_idx_t idx);
/**
* @brief Register a handler to process the RCP failure.
*
* @param[in] handler The RCP failure handler.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
*/
void esp_radio_spinel_register_rcp_failure_handler(esp_radio_spinel_rcp_failure_handler handler, esp_radio_spinel_idx_t idx);
/**
* @brief Deinitialize the RCP.
*
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_rcp_deinit(esp_radio_spinel_idx_t idx);
/**
* @brief Get the version of RCP.
*
* @param[in] running_rcp_version A pointer to the RCP version string.
* @param[in] idx The index of 802.15.4 related protocol stack.
*
* @return
* - ESP_OK on success
* - ESP_FAIL on failures
*
*/
esp_err_t esp_radio_spinel_rcp_version_get(char *running_rcp_version, esp_radio_spinel_idx_t idx);
#ifdef __cplusplus
}
#endif
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik