kopia lustrzana https://github.com/espressif/esp-idf
100 wiersze
2.9 KiB
C
100 wiersze
2.9 KiB
C
/* UART Select Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/select.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_log.h"
|
|
#include "esp_vfs.h"
|
|
#include "esp_vfs_dev.h"
|
|
#include "driver/uart.h"
|
|
|
|
static const char* TAG = "uart_select_example";
|
|
|
|
static void uart_select_task(void *arg)
|
|
{
|
|
if (uart_driver_install(UART_NUM_0, 2*1024, 0, 0, NULL, 0) != ESP_OK) {
|
|
ESP_LOGE(TAG, "Driver installation failed");
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
uart_config_t uart_config = {
|
|
.baud_rate = 115200,
|
|
.data_bits = UART_DATA_8_BITS,
|
|
.parity = UART_PARITY_DISABLE,
|
|
.stop_bits = UART_STOP_BITS_1,
|
|
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
|
|
.source_clk = UART_SCLK_DEFAULT,
|
|
};
|
|
|
|
uart_param_config(UART_NUM_0, &uart_config);
|
|
|
|
while (1) {
|
|
int fd;
|
|
|
|
if ((fd = open("/dev/uart/0", O_RDWR)) == -1) {
|
|
ESP_LOGE(TAG, "Cannot open UART");
|
|
vTaskDelay(5000 / portTICK_PERIOD_MS);
|
|
continue;
|
|
}
|
|
|
|
// We have a driver now installed so set up the read/write functions to use driver also.
|
|
esp_vfs_dev_uart_use_driver(0);
|
|
|
|
while (1) {
|
|
int s;
|
|
fd_set rfds;
|
|
struct timeval tv = {
|
|
.tv_sec = 5,
|
|
.tv_usec = 0,
|
|
};
|
|
|
|
FD_ZERO(&rfds);
|
|
FD_SET(fd, &rfds);
|
|
|
|
s = select(fd + 1, &rfds, NULL, NULL, &tv);
|
|
|
|
if (s < 0) {
|
|
ESP_LOGE(TAG, "Select failed: errno %d", errno);
|
|
break;
|
|
} else if (s == 0) {
|
|
ESP_LOGI(TAG, "Timeout has been reached and nothing has been received");
|
|
} else {
|
|
if (FD_ISSET(fd, &rfds)) {
|
|
char buf;
|
|
if (read(fd, &buf, 1) > 0) {
|
|
ESP_LOGI(TAG, "Received: %c", buf);
|
|
// Note: Only one character was read even the buffer contains more. The other characters will
|
|
// be read one-by-one by subsequent calls to select() which will then return immediately
|
|
// without timeout.
|
|
} else {
|
|
ESP_LOGE(TAG, "UART read error");
|
|
break;
|
|
}
|
|
} else {
|
|
ESP_LOGE(TAG, "No FD has been set in select()");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
close(fd);
|
|
}
|
|
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
xTaskCreate(uart_select_task, "uart_select_task", 4*1024, NULL, 5, NULL);
|
|
}
|