kopia lustrzana https://github.com/espressif/esp-idf
55 wiersze
2.0 KiB
C
55 wiersze
2.0 KiB
C
/* LEDC (LED Controller) basic example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include "driver/ledc.h"
|
|
#include "esp_err.h"
|
|
|
|
#define LEDC_TIMER LEDC_TIMER_0
|
|
#define LEDC_MODE LEDC_LOW_SPEED_MODE
|
|
#define LEDC_OUTPUT_IO (5) // Define the output GPIO
|
|
#define LEDC_CHANNEL LEDC_CHANNEL_0
|
|
#define LEDC_DUTY_RES LEDC_TIMER_13_BIT // Set duty resolution to 13 bits
|
|
#define LEDC_DUTY (4095) // Set duty to 50%. ((2 ** 13) - 1) * 50% = 4095
|
|
#define LEDC_FREQUENCY (5000) // Frequency in Hertz. Set frequency at 5 kHz
|
|
|
|
static void example_ledc_init(void)
|
|
{
|
|
// Prepare and then apply the LEDC PWM timer configuration
|
|
ledc_timer_config_t ledc_timer = {
|
|
.speed_mode = LEDC_MODE,
|
|
.timer_num = LEDC_TIMER,
|
|
.duty_resolution = LEDC_DUTY_RES,
|
|
.freq_hz = LEDC_FREQUENCY, // Set output frequency at 5 kHz
|
|
.clk_cfg = LEDC_AUTO_CLK
|
|
};
|
|
ESP_ERROR_CHECK(ledc_timer_config(&ledc_timer));
|
|
|
|
// Prepare and then apply the LEDC PWM channel configuration
|
|
ledc_channel_config_t ledc_channel = {
|
|
.speed_mode = LEDC_MODE,
|
|
.channel = LEDC_CHANNEL,
|
|
.timer_sel = LEDC_TIMER,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.gpio_num = LEDC_OUTPUT_IO,
|
|
.duty = 0, // Set duty to 0%
|
|
.hpoint = 0
|
|
};
|
|
ESP_ERROR_CHECK(ledc_channel_config(&ledc_channel));
|
|
}
|
|
|
|
void app_main(void)
|
|
{
|
|
// Set the LEDC peripheral configuration
|
|
example_ledc_init();
|
|
// Set duty to 50%
|
|
ESP_ERROR_CHECK(ledc_set_duty(LEDC_MODE, LEDC_CHANNEL, LEDC_DUTY));
|
|
// Update duty to apply the new value
|
|
ESP_ERROR_CHECK(ledc_update_duty(LEDC_MODE, LEDC_CHANNEL));
|
|
}
|