esp-idf/components/esp_rom/include/esp32/rom/gpio.h

309 wiersze
8.7 KiB
C

// Copyright 2010-2016 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#ifndef _ROM_GPIO_H_
#define _ROM_GPIO_H_
#include <stdint.h>
#include <stdbool.h>
#include "esp_attr.h"
#include "sdkconfig.h"
#ifdef CONFIG_LEGACY_INCLUDE_COMMON_HEADERS
#include "soc/gpio_reg.h"
#include "soc/gpio_pins.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/** \defgroup gpio_apis, uart configuration and communication related apis
* @brief gpio apis
*/
/** @addtogroup gpio_apis
* @{
*/
#define GPIO_REG_READ(reg) READ_PERI_REG(reg)
#define GPIO_REG_WRITE(reg, val) WRITE_PERI_REG(reg, val)
#define GPIO_ID_PIN0 0
#define GPIO_ID_PIN(n) (GPIO_ID_PIN0+(n))
#define GPIO_PIN_ADDR(i) (GPIO_PIN0_REG + i*4)
#define GPIO_FUNC_IN_HIGH 0x38
#define GPIO_FUNC_IN_LOW 0x30
#define GPIO_ID_IS_PIN_REGISTER(reg_id) \
((reg_id >= GPIO_ID_PIN0) && (reg_id <= GPIO_ID_PIN(GPIO_PIN_COUNT-1)))
#define GPIO_REGID_TO_PINIDX(reg_id) ((reg_id) - GPIO_ID_PIN0)
typedef enum {
GPIO_PIN_INTR_DISABLE = 0,
GPIO_PIN_INTR_POSEDGE = 1,
GPIO_PIN_INTR_NEGEDGE = 2,
GPIO_PIN_INTR_ANYEDGE = 3,
GPIO_PIN_INTR_LOLEVEL = 4,
GPIO_PIN_INTR_HILEVEL = 5
} GPIO_INT_TYPE;
#define GPIO_OUTPUT_SET(gpio_no, bit_value) \
((gpio_no < 32) ? gpio_output_set(bit_value<<gpio_no, (bit_value ? 0 : 1)<<gpio_no, 1<<gpio_no,0) : \
gpio_output_set_high(bit_value<<(gpio_no - 32), (bit_value ? 0 : 1)<<(gpio_no - 32), 1<<(gpio_no -32),0))
#define GPIO_DIS_OUTPUT(gpio_no) ((gpio_no < 32) ? gpio_output_set(0,0,0, 1<<gpio_no) : gpio_output_set_high(0,0,0, 1<<(gpio_no - 32)))
#define GPIO_INPUT_GET(gpio_no) ((gpio_no < 32) ? ((gpio_input_get()>>gpio_no)&BIT0) : ((gpio_input_get_high()>>(gpio_no - 32))&BIT0))
/* GPIO interrupt handler, registered through gpio_intr_handler_register */
typedef void (* gpio_intr_handler_fn_t)(uint32_t intr_mask, bool high, void *arg);
/**
* @brief Initialize GPIO. This includes reading the GPIO Configuration DataSet
* to initialize "output enables" and pin configurations for each gpio pin.
* Please do not call this function in SDK.
*
* @param None
*
* @return None
*/
void gpio_init(void);
/**
* @brief Change GPIO(0-31) pin output by setting, clearing, or disabling pins, GPIO0<->BIT(0).
* There is no particular ordering guaranteed; so if the order of writes is significant,
* calling code should divide a single call into multiple calls.
*
* @param uint32_t set_mask : the gpios that need high level.
*
* @param uint32_t clear_mask : the gpios that need low level.
*
* @param uint32_t enable_mask : the gpios that need be changed.
*
* @param uint32_t disable_mask : the gpios that need diable output.
*
* @return None
*/
void gpio_output_set(uint32_t set_mask, uint32_t clear_mask, uint32_t enable_mask, uint32_t disable_mask);
/**
* @brief Change GPIO(32-39) pin output by setting, clearing, or disabling pins, GPIO32<->BIT(0).
* There is no particular ordering guaranteed; so if the order of writes is significant,
* calling code should divide a single call into multiple calls.
*
* @param uint32_t set_mask : the gpios that need high level.
*
* @param uint32_t clear_mask : the gpios that need low level.
*
* @param uint32_t enable_mask : the gpios that need be changed.
*
* @param uint32_t disable_mask : the gpios that need diable output.
*
* @return None
*/
void gpio_output_set_high(uint32_t set_mask, uint32_t clear_mask, uint32_t enable_mask, uint32_t disable_mask);
/**
* @brief Sample the value of GPIO input pins(0-31) and returns a bitmask.
*
* @param None
*
* @return uint32_t : bitmask for GPIO input pins, BIT(0) for GPIO0.
*/
uint32_t gpio_input_get(void);
/**
* @brief Sample the value of GPIO input pins(32-39) and returns a bitmask.
*
* @param None
*
* @return uint32_t : bitmask for GPIO input pins, BIT(0) for GPIO32.
*/
uint32_t gpio_input_get_high(void);
/**
* @brief Register an application-specific interrupt handler for GPIO pin interrupts.
* Once the interrupt handler is called, it will not be called again until after a call to gpio_intr_ack.
* Please do not call this function in SDK.
*
* @param gpio_intr_handler_fn_t fn : gpio application-specific interrupt handler
*
* @param void *arg : gpio application-specific interrupt handler argument.
*
* @return None
*/
void gpio_intr_handler_register(gpio_intr_handler_fn_t fn, void *arg);
/**
* @brief Get gpio interrupts which happens but not processed.
* Please do not call this function in SDK.
*
* @param None
*
* @return uint32_t : bitmask for GPIO pending interrupts, BIT(0) for GPIO0.
*/
uint32_t gpio_intr_pending(void);
/**
* @brief Get gpio interrupts which happens but not processed.
* Please do not call this function in SDK.
*
* @param None
*
* @return uint32_t : bitmask for GPIO pending interrupts, BIT(0) for GPIO32.
*/
uint32_t gpio_intr_pending_high(void);
/**
* @brief Ack gpio interrupts to process pending interrupts.
* Please do not call this function in SDK.
*
* @param uint32_t ack_mask: bitmask for GPIO ack interrupts, BIT(0) for GPIO0.
*
* @return None
*/
void gpio_intr_ack(uint32_t ack_mask);
/**
* @brief Ack gpio interrupts to process pending interrupts.
* Please do not call this function in SDK.
*
* @param uint32_t ack_mask: bitmask for GPIO ack interrupts, BIT(0) for GPIO32.
*
* @return None
*/
void gpio_intr_ack_high(uint32_t ack_mask);
/**
* @brief Set GPIO to wakeup the ESP32.
* Please do not call this function in SDK.
*
* @param uint32_t i: gpio number.
*
* @param GPIO_INT_TYPE intr_state : only GPIO_PIN_INTR_LOLEVEL\GPIO_PIN_INTR_HILEVEL can be used
*
* @return None
*/
void gpio_pin_wakeup_enable(uint32_t i, GPIO_INT_TYPE intr_state);
/**
* @brief disable GPIOs to wakeup the ESP32.
* Please do not call this function in SDK.
*
* @param None
*
* @return None
*/
void gpio_pin_wakeup_disable(void);
/**
* @brief set gpio input to a signal, one gpio can input to several signals.
*
* @param uint32_t gpio : gpio number, 0~0x27
* gpio == 0x30, input 0 to signal
* gpio == 0x34, ???
* gpio == 0x38, input 1 to signal
*
* @param uint32_t signal_idx : signal index.
*
* @param bool inv : the signal is inv or not
*
* @return None
*/
void gpio_matrix_in(uint32_t gpio, uint32_t signal_idx, bool inv);
/**
* @brief set signal output to gpio, one signal can output to several gpios.
*
* @param uint32_t gpio : gpio number, 0~0x27
*
* @param uint32_t signal_idx : signal index.
* signal_idx == 0x100, cancel output put to the gpio
*
* @param bool out_inv : the signal output is inv or not
*
* @param bool oen_inv : the signal output enable is inv or not
*
* @return None
*/
void gpio_matrix_out(uint32_t gpio, uint32_t signal_idx, bool out_inv, bool oen_inv);
/**
* @brief Select pad as a gpio function from IOMUX.
*
* @param uint32_t gpio_num : gpio number, 0~0x27
*
* @return None
*/
void gpio_pad_select_gpio(uint8_t gpio_num);
/**
* @brief Set pad driver capability.
*
* @param uint32_t gpio_num : gpio number, 0~0x27
*
* @param uint8_t drv : 0-3
*
* @return None
*/
void gpio_pad_set_drv(uint8_t gpio_num, uint8_t drv);
/**
* @brief Pull up the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x27
*
* @return None
*/
void gpio_pad_pullup(uint8_t gpio_num);
/**
* @brief Pull down the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x27
*
* @return None
*/
void gpio_pad_pulldown(uint8_t gpio_num);
/**
* @brief Unhold the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x27
*
* @return None
*/
void gpio_pad_unhold(uint8_t gpio_num);
/**
* @brief Hold the pad from gpio number.
*
* @param uint32_t gpio_num : gpio number, 0~0x27
*
* @return None
*/
void gpio_pad_hold(uint8_t gpio_num);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* _ROM_GPIO_H_ */