esp-idf/components/hal/spi_slave_hal_iram.c

120 wiersze
4.3 KiB
C

#include "hal/spi_slave_hal.h"
#include "hal/spi_ll.h"
#include "soc/soc_caps.h"
//This GDMA related part will be introduced by GDMA dedicated APIs in the future. Here we temporarily use macros.
#if SOC_GDMA_SUPPORTED
#include "soc/gdma_struct.h"
#include "hal/gdma_ll.h"
#define spi_dma_ll_rx_reset(dev, chan) gdma_ll_rx_reset_channel(&GDMA, chan)
#define spi_dma_ll_tx_reset(dev, chan) gdma_ll_tx_reset_channel(&GDMA, chan);
#define spi_dma_ll_rx_start(dev, chan, addr) do {\
gdma_ll_rx_set_desc_addr(&GDMA, chan, (uint32_t)addr);\
gdma_ll_rx_start(&GDMA, chan);\
} while (0)
#define spi_dma_ll_tx_start(dev, chan, addr) do {\
gdma_ll_tx_set_desc_addr(&GDMA, chan, (uint32_t)addr);\
gdma_ll_tx_start(&GDMA, chan);\
} while (0)
#endif
bool spi_slave_hal_usr_is_done(spi_slave_hal_context_t* hal)
{
return spi_ll_usr_is_done(hal->hw);
}
void spi_slave_hal_user_start(const spi_slave_hal_context_t *hal)
{
spi_ll_clear_int_stat(hal->hw); //clear int bit
spi_ll_slave_user_start(hal->hw);
}
void spi_slave_hal_prepare_data(const spi_slave_hal_context_t *hal)
{
if (hal->use_dma) {
//Fill DMA descriptors
if (hal->rx_buffer) {
lldesc_setup_link(hal->dmadesc_rx, hal->rx_buffer, ((hal->bitlen + 7) / 8), true);
//reset dma inlink, this should be reset before spi related reset
spi_dma_ll_rx_reset(hal->dma_in, hal->rx_dma_chan);
spi_ll_dma_rx_fifo_reset(hal->dma_in);
spi_ll_slave_reset(hal->hw);
spi_ll_infifo_full_clr(hal->hw);
spi_ll_dma_rx_enable(hal->hw, 1);
spi_dma_ll_rx_start(hal->dma_in, hal->rx_dma_chan, &hal->dmadesc_rx[0]);
}
if (hal->tx_buffer) {
lldesc_setup_link(hal->dmadesc_tx, hal->tx_buffer, (hal->bitlen + 7) / 8, false);
//reset dma outlink, this should be reset before spi related reset
spi_dma_ll_tx_reset(hal->dma_out, hal->tx_dma_chan);
spi_ll_dma_tx_fifo_reset(hal->dma_out);
spi_ll_slave_reset(hal->hw);
spi_ll_outfifo_empty_clr(hal->hw);
spi_ll_dma_tx_enable(hal->hw, 1);
spi_dma_ll_tx_start(hal->dma_out, hal->tx_dma_chan, (&hal->dmadesc_tx[0]));
}
} else {
//No DMA. Turn off SPI and copy data to transmit buffers.
if (hal->tx_buffer) {
spi_ll_slave_reset(hal->hw);
spi_ll_write_buffer(hal->hw, hal->tx_buffer, hal->bitlen);
}
spi_ll_cpu_tx_fifo_reset(hal->hw);
}
spi_ll_slave_set_rx_bitlen(hal->hw, hal->bitlen);
spi_ll_slave_set_tx_bitlen(hal->hw, hal->bitlen);
#ifdef CONFIG_IDF_TARGET_ESP32
//SPI Slave mode on ESP32 requires MOSI/MISO enable
spi_ll_enable_mosi(hal->hw, (hal->rx_buffer == NULL) ? 0 : 1);
spi_ll_enable_miso(hal->hw, (hal->tx_buffer == NULL) ? 0 : 1);
#endif
}
void spi_slave_hal_store_result(spi_slave_hal_context_t *hal)
{
//when data of cur_trans->length are all sent, the slv_rdata_bit
//will be the length sent-1 (i.e. cur_trans->length-1 ), otherwise
//the length sent.
hal->rcv_bitlen = spi_ll_slave_get_rcv_bitlen(hal->hw);
if (hal->rcv_bitlen == hal->bitlen - 1) {
hal->rcv_bitlen++;
}
if (!hal->use_dma && hal->rx_buffer) {
//Copy result out
spi_ll_read_buffer(hal->hw, hal->rx_buffer, hal->bitlen);
}
}
uint32_t spi_slave_hal_get_rcv_bitlen(spi_slave_hal_context_t *hal)
{
return hal->rcv_bitlen;
}
#if CONFIG_IDF_TARGET_ESP32
//This workaround is only for esp32
bool spi_slave_hal_dma_need_reset(const spi_slave_hal_context_t *hal)
{
bool ret;
ret = false;
if (hal->use_dma && hal->rx_buffer) {
int i;
//In case CS goes high too soon, the transfer is aborted while the DMA channel still thinks it's going. This
//leads to issues later on, so in that case we need to reset the channel. The state can be detected because
//the DMA system doesn't give back the offending descriptor; the owner is still set to DMA.
for (i = 0; hal->dmadesc_rx[i].eof == 0 && hal->dmadesc_rx[i].owner == 0; i++) {}
if (hal->dmadesc_rx[i].owner) {
ret = true;
}
}
return ret;
}
#endif //#if CONFIG_IDF_TARGET_ESP32