esp-idf/examples/storage/semihost_vfs
Roland Dobai 493c852b73 CI: Use higher-level interaction with GDB in example tests and test apps 2020-06-05 14:58:34 +00:00
..
data
main
CMakeLists.txt
Makefile
README.md
sdkconfig.defaults
semihost_vfs_example_test.py CI: Use higher-level interaction with GDB in example tests and test apps 2020-06-05 14:58:34 +00:00

README.md

Semihosting VFS driver example

(See the README.md file in the upper level 'examples' directory for more information about examples.)

This example demonstrates how to use semihosting VFS driver with ESP32. Example does the following steps:

  1. Uses esp_vfs_semihost_register function to register exposed host directory in VFS, enabling C standard library and POSIX functions to be used.
  2. Redirects stdout from the UART to the file on the host using freopen.
  3. Prints several messages to the redirected.
  4. Switches back to UART stdout using freopen.
  5. Opens text file on the host.
  6. Reads the file and prints its content on stdout.

How to use example

Hardware and tools required

This example does not require any special hardware, and can be run on any common development board. This example requires OpenOCD. NOTE: In order to run this example you need OpenOCD version v0.10.0-esp32-20190313 or later.

Run OpenOCD using command:

bin/openocd -s share/openocd/scripts -c 'set ESP_SEMIHOST_BASEDIR '$IDF_PATH/examples/storage/semihost_vfs/data -f board/esp32-wrover-kit-3.3v.cfg

This command also configures OpenOCD to expose example project data subdirectory to the target's semihosting VFS driver.

Build and flash

Replace PORT with serial port name:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example output

There are two types of outputs produced by example:

  1. File esp32_stdout.txt in the host directory mounted to the target:
W (274) example: Switched to semihosted stdout
Semihosted stdout write 0
Semihosted stdout write 1
Semihosted stdout write 2
...
Semihosted stdout write 98
Semihosted stdout write 99
W (274) example: Switch to UART stdout
  1. On the boards console:
W (274) example: Switch to semihosted stdout
W (274) example: Switched back to UART stdout
I (274) example: Wrote 2798 bytes
====================== HOST DATA START =========================
The following are the graphical (non-control) characters defined by
ISO 8859-1 (1987).  Descriptions in words aren't all that helpful,
but they're the best we can do in text.  A graphics file illustrating
the character set should be available from the same archive as this
file.

Hex Description                 Hex Description

20  SPACE
...
7D  RIGHT CURLY BRACKET         FD  SMALL LETTER Y WITH ACUTE
7E  TILDE                       FE  SMALL LETTER THORN (Icelandic)
                                FF  SMALL LETTER Y WITH DIAERESIS
====================== HOST DATA END =========================
I (694) example: Read 6121 bytes