esp-idf/components/esp32/cache_sram_mmu.c

142 wiersze
5.0 KiB
C

// Copyright 2010-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdint.h>
#include "soc/soc.h"
#include "soc/dport_reg.h"
#include "string.h"
#include "esp_spi_flash.h"
//Errors that can be returned
#define MMU_SET_ADDR_ALIGNED_ERROR 1
#define MMU_SET_PAGE_SIZE_ERROR 3
#define MMU_SET_VADDR_OUT_RANGE 5
#define PROCACHE_MMU_ADDR_BASE 0x3FF10000
#define APPCACHE_MMU_ADDR_BASE 0x3FF12000
//sram
#define PRO_DRAM1_START_ADDR 0x3F800000
#define PRO_DRAM1_END_ADDR(psize) (PRO_DRAM1_START_ADDR + ((psize) << 17))
//cache mmu register file address
#define CACHE_MMU_ADDRESS_BASE(cpu_no) ((cpu_no) ? (APPCACHE_MMU_ADDR_BASE) : (PROCACHE_MMU_ADDR_BASE))
//virtual address, physical address check
#define ADDRESS_CHECK(addr,psize) (((addr) & (0xFFFF >>((64/(psize))-1))) != 0)
//CPU number check
#define CPU_NUMBER_CHECK(cpu_no) (((cpu_no)<0) || ((cpu_no)>1))
//PID check
#define PID_CHECK(pid) (((pid)<0) || ((pid)>7))
//flash MMU edge check (flash size default : 16*1024 K)
#define FLASH_MMU_EDGE_CHECK(mmu_val,num) (((mmu_val) + (num)) > 256)
//sram MMU edge check (sram size default : 8*1024 K)
#define SRAM_MMU_EDGE_CHECK(mmu_val,num,psize) (((mmu_val) + (num)) > ((8*1024)/(psize)))
//We can relegate to the ROM version if the 2nd core isn't running (yet) and the RTOS is not started yet, for instance
//in the bootloader and in the app start process. The ROM code manually disables the cache, without using
//cache guards.
unsigned int cache_sram_mmu_set_rom(int cpu_no, int pid, unsigned int vaddr, unsigned int paddr, int psize, int num);
#ifndef BOOTLOADER_BUILD
/*
Note that this function is a replacement for the ROM function with the same name, with these differences:
- It uses the DPORT workarounds
- It fixes a bug where the ROM version throws an error when vaddr is more than 2MiB into the memory region
- It uses the SPI cache guards to make sure the MMU is idle
*/
unsigned int IRAM_ATTR cache_sram_mmu_set(int cpu_no, int pid, unsigned int vaddr, unsigned int paddr, int psize, int num)
{
const spi_flash_guard_funcs_t *guard=spi_flash_guard_get();
if (!guard) {
//Still starting up; guards not available yet. Use ROM version of code.
return cache_sram_mmu_set_rom(cpu_no, pid, vaddr, paddr, psize, num);
}
unsigned int i,shift,mask_s;
unsigned int mmu_addr;
unsigned int mmu_table_val;
//address check
if( (ADDRESS_CHECK(vaddr,psize)) || (ADDRESS_CHECK(paddr,psize)) ){
return MMU_SET_ADDR_ALIGNED_ERROR;
}
//psize check
if(psize == 32) {
shift = 15;
mask_s = 0;
} else if(psize == 16) {
shift = 14;
mask_s = 1;
} else if(psize == 8) {
shift = 13;
mask_s = 2;
} else if(psize == 4) {
shift = 12;
mask_s = 3;
} else if(psize == 2) {
shift = 11;
mask_s = 4;
} else {
return MMU_SET_PAGE_SIZE_ERROR;
}
//mmu value
mmu_table_val = paddr >> shift;
//mmu_addr
if(pid == 0 || pid == 1){
if(vaddr >= PRO_DRAM1_START_ADDR && vaddr < PRO_DRAM1_END_ADDR(psize)){
mmu_addr = 1152 + ((vaddr & (0x3FFFFF >> mask_s)) >> shift);
} else{
return MMU_SET_VADDR_OUT_RANGE;
}
} else {
if(vaddr >= PRO_DRAM1_START_ADDR && vaddr < PRO_DRAM1_END_ADDR(psize)){
mmu_addr = (1024 + (pid<<7)) + ((vaddr & (0x3FFFFF >> mask_s)) >> shift);
} else{
return MMU_SET_VADDR_OUT_RANGE;
}
}
//The MMU registers are implemented in such a way that lookups from the cache subsystem may collide with
//CPU access to the MMU registers. We use the flash guards to make sure the cache is disabled.
guard->start();
//mmu change
for ( i = 0; i < num; i++){
*(volatile unsigned int *)(CACHE_MMU_ADDRESS_BASE(cpu_no) + mmu_addr * 4) = mmu_table_val + i; //write table
mmu_addr++;
}
if(cpu_no == 0){
DPORT_REG_SET_FIELD(DPORT_PRO_CACHE_CTRL1_REG, DPORT_PRO_CMMU_SRAM_PAGE_MODE, mask_s);
} else {
DPORT_REG_SET_FIELD(DPORT_APP_CACHE_CTRL1_REG, DPORT_APP_CMMU_SRAM_PAGE_MODE, mask_s);
}
guard->end();
return 0;
}
#else
//For the bootloader, we can always use the ROM version of this: it works well enough and keeps the size of the bootloader binary down.
unsigned int cache_sram_mmu_set(int cpu_no, int pid, unsigned int vaddr, unsigned int paddr, int psize, int num) {
return cache_sram_mmu_set_rom(cpu_no, pid, vaddr, paddr, psize, num);
}
#endif