![]() |
||
---|---|---|
.. | ||
main | ||
CMakeLists.txt | ||
Makefile | ||
README.md |
README.md
TCP Server example
(See the README.md file in the upper level 'examples' directory for more information about examples.)
The application creates a TCP socket with the specified port number and waits for a connection request from the client. After accepting a request from the client, connection between server and client is established and the application waits for some data to be received from the client. Received data are printed as ASCII text and retransmitted back to the client.
How to use example
In order to create TCP client that communicates with TCP server example, choose one of the following options.
There are many host-side tools which can be used to interact with the UDP/TCP server/client.
One command line tool is netcat which can send and receive many kinds of packets.
Note: please replace 192.168.0.167 3333
with desired IPV4/IPV6 address (displayed in monitor console) and port number in the following command.
In addition to those tools, simple Python scripts can be found under sockets/scripts directory. Every script is designed to interact with one of the examples.
TCP client using netcat
nc 192.168.0.167 3333
Python scripts
Script tcpclient.py contains configuration for port number, IP version (IPv4 or IPv6) and IP address that has to be altered to match the values used by the application. Example:
PORT = 3333;
IP_VERSION = 'IPv4'
IPV4 = '192.168.0.167'
IPV6 = 'FE80::32AE:A4FF:FE80:5288'
Hardware Required
This example can be run on any commonly available ESP32 development board.
Configure the project
make menuconfig
Set following parameter under Serial Flasher Options:
- Set
Default serial port
.
Set following parameters under Example Configuration Options:
-
Set
WiFi SSID
of the Router (Access-Point). -
Set
WiFi Password
of the Router (Access-Point). -
Set
IP version
of the example to be IPV4 or IPV6. -
Set
Port
number of the socket, that server example will create.
Build and Flash
Build the project and flash it to the board, then run monitor tool to view serial output:
make -j4 flash monitor
(To exit the serial monitor, type Ctrl-]
.)
See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.
Troubleshooting
Start server first, to receive data sent from the client (application).