kopia lustrzana https://github.com/espressif/esp-idf
324 wiersze
11 KiB
C
324 wiersze
11 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021-2022 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <stdlib.h>
|
|
#include <sys/cdefs.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_lcd_panel_interface.h"
|
|
#include "esp_lcd_panel_io.h"
|
|
#include "esp_lcd_panel_vendor.h"
|
|
#include "esp_lcd_panel_ops.h"
|
|
#include "esp_lcd_panel_commands.h"
|
|
#include "driver/gpio.h"
|
|
#include "esp_log.h"
|
|
#include "esp_check.h"
|
|
|
|
static const char *TAG = "gc9a01";
|
|
|
|
static esp_err_t panel_gc9a01_del(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_gc9a01_reset(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_gc9a01_init(esp_lcd_panel_t *panel);
|
|
static esp_err_t panel_gc9a01_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data);
|
|
static esp_err_t panel_gc9a01_invert_color(esp_lcd_panel_t *panel, bool invert_color_data);
|
|
static esp_err_t panel_gc9a01_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y);
|
|
static esp_err_t panel_gc9a01_swap_xy(esp_lcd_panel_t *panel, bool swap_axes);
|
|
static esp_err_t panel_gc9a01_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap);
|
|
static esp_err_t panel_gc9a01_disp_on_off(esp_lcd_panel_t *panel, bool off);
|
|
|
|
typedef struct {
|
|
esp_lcd_panel_t base;
|
|
esp_lcd_panel_io_handle_t io;
|
|
int reset_gpio_num;
|
|
bool reset_level;
|
|
int x_gap;
|
|
int y_gap;
|
|
unsigned int bits_per_pixel;
|
|
uint8_t madctl_val; // save current value of LCD_CMD_MADCTL register
|
|
uint8_t colmod_cal; // save surrent value of LCD_CMD_COLMOD register
|
|
} gc9a01_panel_t;
|
|
|
|
esp_err_t esp_lcd_new_panel_gc9a01(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
gc9a01_panel_t *gc9a01 = NULL;
|
|
ESP_GOTO_ON_FALSE(io && panel_dev_config && ret_panel, ESP_ERR_INVALID_ARG, err, TAG, "invalid argument");
|
|
gc9a01 = calloc(1, sizeof(gc9a01_panel_t));
|
|
ESP_GOTO_ON_FALSE(gc9a01, ESP_ERR_NO_MEM, err, TAG, "no mem for gc9a01 panel");
|
|
|
|
if (panel_dev_config->reset_gpio_num >= 0) {
|
|
gpio_config_t io_conf = {
|
|
.mode = GPIO_MODE_OUTPUT,
|
|
.pin_bit_mask = 1ULL << panel_dev_config->reset_gpio_num,
|
|
};
|
|
ESP_GOTO_ON_ERROR(gpio_config(&io_conf), err, TAG, "configure GPIO for RST line failed");
|
|
}
|
|
|
|
switch (panel_dev_config->color_space) {
|
|
case ESP_LCD_COLOR_SPACE_RGB:
|
|
gc9a01->madctl_val = 0;
|
|
break;
|
|
case ESP_LCD_COLOR_SPACE_BGR:
|
|
gc9a01->madctl_val |= LCD_CMD_BGR_BIT;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported color space");
|
|
break;
|
|
}
|
|
|
|
switch (panel_dev_config->bits_per_pixel) {
|
|
case 16:
|
|
gc9a01->colmod_cal = 0x55;
|
|
break;
|
|
case 18:
|
|
gc9a01->colmod_cal = 0x66;
|
|
break;
|
|
default:
|
|
ESP_GOTO_ON_FALSE(false, ESP_ERR_NOT_SUPPORTED, err, TAG, "unsupported pixel width");
|
|
break;
|
|
}
|
|
|
|
gc9a01->io = io;
|
|
gc9a01->bits_per_pixel = panel_dev_config->bits_per_pixel;
|
|
gc9a01->reset_gpio_num = panel_dev_config->reset_gpio_num;
|
|
gc9a01->reset_level = panel_dev_config->flags.reset_active_high;
|
|
gc9a01->base.del = panel_gc9a01_del;
|
|
gc9a01->base.reset = panel_gc9a01_reset;
|
|
gc9a01->base.init = panel_gc9a01_init;
|
|
gc9a01->base.draw_bitmap = panel_gc9a01_draw_bitmap;
|
|
gc9a01->base.invert_color = panel_gc9a01_invert_color;
|
|
gc9a01->base.set_gap = panel_gc9a01_set_gap;
|
|
gc9a01->base.mirror = panel_gc9a01_mirror;
|
|
gc9a01->base.swap_xy = panel_gc9a01_swap_xy;
|
|
gc9a01->base.disp_on_off = panel_gc9a01_disp_on_off;
|
|
*ret_panel = &(gc9a01->base);
|
|
ESP_LOGD(TAG, "new gc9a01 panel @%p", gc9a01);
|
|
|
|
return ESP_OK;
|
|
|
|
err:
|
|
if (gc9a01) {
|
|
if (panel_dev_config->reset_gpio_num >= 0) {
|
|
gpio_reset_pin(panel_dev_config->reset_gpio_num);
|
|
}
|
|
free(gc9a01);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_del(esp_lcd_panel_t *panel)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
|
|
if (gc9a01->reset_gpio_num >= 0) {
|
|
gpio_reset_pin(gc9a01->reset_gpio_num);
|
|
}
|
|
ESP_LOGD(TAG, "del gc9a01 panel @%p", gc9a01);
|
|
free(gc9a01);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_reset(esp_lcd_panel_t *panel)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
|
|
// perform hardware reset
|
|
if (gc9a01->reset_gpio_num >= 0) {
|
|
gpio_set_level(gc9a01->reset_gpio_num, gc9a01->reset_level);
|
|
vTaskDelay(pdMS_TO_TICKS(10));
|
|
gpio_set_level(gc9a01->reset_gpio_num, !gc9a01->reset_level);
|
|
vTaskDelay(pdMS_TO_TICKS(10));
|
|
} else { // perform software reset
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_SWRESET, NULL, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(20)); // spec, wait at least 5ms before sending new command
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
typedef struct {
|
|
uint8_t cmd;
|
|
uint8_t data[16];
|
|
uint8_t data_bytes; // Length of data in above data array; 0xFF = end of cmds.
|
|
} lcd_init_cmd_t;
|
|
|
|
static const lcd_init_cmd_t vendor_specific_init[] = {
|
|
// Enable Inter Register
|
|
{0xfe, {0}, 0},
|
|
{0xef, {0}, 0},
|
|
{0xeb, {0x14}, 1},
|
|
{0x84, {0x60}, 1},
|
|
{0x85, {0xff}, 1},
|
|
{0x86, {0xff}, 1},
|
|
{0x87, {0xff}, 1},
|
|
{0x8e, {0xff}, 1},
|
|
{0x8f, {0xff}, 1},
|
|
{0x88, {0x0a}, 1},
|
|
{0x89, {0x23}, 1},
|
|
{0x8a, {0x00}, 1},
|
|
{0x8b, {0x80}, 1},
|
|
{0x8c, {0x01}, 1},
|
|
{0x8d, {0x03}, 1},
|
|
{0x90, {0x08, 0x08, 0x08, 0x08}, 4},
|
|
{0xff, {0x60, 0x01, 0x04}, 3},
|
|
{0xC3, {0x13}, 1},
|
|
{0xC4, {0x13}, 1},
|
|
{0xC9, {0x30}, 1},
|
|
{0xbe, {0x11}, 1},
|
|
{0xe1, {0x10, 0x0e}, 2},
|
|
{0xdf, {0x21, 0x0c, 0x02}, 3},
|
|
// Set gamma
|
|
{0xF0, {0x45, 0x09, 0x08, 0x08, 0x26, 0x2a}, 6},
|
|
{0xF1, {0x43, 0x70, 0x72, 0x36, 0x37, 0x6f}, 6},
|
|
{0xF2, {0x45, 0x09, 0x08, 0x08, 0x26, 0x2a}, 6},
|
|
{0xF3, {0x43, 0x70, 0x72, 0x36, 0x37, 0x6f}, 6},
|
|
{0xed, {0x1b, 0x0b}, 2},
|
|
{0xae, {0x77}, 1},
|
|
{0xcd, {0x63}, 1},
|
|
{0x70, {0x07, 0x07, 0x04, 0x0e, 0x0f, 0x09, 0x07, 0x08, 0x03}, 9},
|
|
{0xE8, {0x34}, 1}, // 4 dot inversion
|
|
{0x60, {0x38, 0x0b, 0x6D, 0x6D, 0x39, 0xf0, 0x6D, 0x6D}, 8},
|
|
{0x61, {0x38, 0xf4, 0x6D, 0x6D, 0x38, 0xf7, 0x6D, 0x6D}, 8},
|
|
{0x62, {0x38, 0x0D, 0x71, 0xED, 0x70, 0x70, 0x38, 0x0F, 0x71, 0xEF, 0x70, 0x70}, 12},
|
|
{0x63, {0x38, 0x11, 0x71, 0xF1, 0x70, 0x70, 0x38, 0x13, 0x71, 0xF3, 0x70, 0x70}, 12},
|
|
{0x64, {0x28, 0x29, 0xF1, 0x01, 0xF1, 0x00, 0x07}, 7},
|
|
{0x66, {0x3C, 0x00, 0xCD, 0x67, 0x45, 0x45, 0x10, 0x00, 0x00, 0x00}, 10},
|
|
{0x67, {0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0x54, 0x10, 0x32, 0x98}, 10},
|
|
{0x74, {0x10, 0x45, 0x80, 0x00, 0x00, 0x4E, 0x00}, 7},
|
|
{0x98, {0x3e, 0x07}, 2},
|
|
{0x99, {0x3e, 0x07}, 2},
|
|
{0, {0}, 0xff},
|
|
};
|
|
|
|
static esp_err_t panel_gc9a01_init(esp_lcd_panel_t *panel)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
|
|
// LCD goes into sleep mode and display will be turned off after power on reset, exit sleep mode first
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_SLPOUT, NULL, 0);
|
|
vTaskDelay(pdMS_TO_TICKS(100));
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
|
|
gc9a01->madctl_val,
|
|
}, 1);
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_COLMOD, (uint8_t[]) {
|
|
gc9a01->colmod_cal,
|
|
}, 1);
|
|
|
|
// vendor specific initialization, it can be different between manufacturers
|
|
// should consult the LCD supplier for initialization sequence code
|
|
int cmd = 0;
|
|
while (vendor_specific_init[cmd].data_bytes != 0xff) {
|
|
esp_lcd_panel_io_tx_param(io, vendor_specific_init[cmd].cmd, vendor_specific_init[cmd].data, vendor_specific_init[cmd].data_bytes & 0x1F);
|
|
cmd++;
|
|
}
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_draw_bitmap(esp_lcd_panel_t *panel, int x_start, int y_start, int x_end, int y_end, const void *color_data)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
assert((x_start < x_end) && (y_start < y_end) && "start position must be smaller than end position");
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
|
|
x_start += gc9a01->x_gap;
|
|
x_end += gc9a01->x_gap;
|
|
y_start += gc9a01->y_gap;
|
|
y_end += gc9a01->y_gap;
|
|
|
|
// define an area of frame memory where MCU can access
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_CASET, (uint8_t[]) {
|
|
(x_start >> 8) & 0xFF,
|
|
x_start & 0xFF,
|
|
((x_end - 1) >> 8) & 0xFF,
|
|
(x_end - 1) & 0xFF,
|
|
}, 4);
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_RASET, (uint8_t[]) {
|
|
(y_start >> 8) & 0xFF,
|
|
y_start & 0xFF,
|
|
((y_end - 1) >> 8) & 0xFF,
|
|
(y_end - 1) & 0xFF,
|
|
}, 4);
|
|
// transfer frame buffer
|
|
size_t len = (x_end - x_start) * (y_end - y_start) * gc9a01->bits_per_pixel / 8;
|
|
esp_lcd_panel_io_tx_color(io, LCD_CMD_RAMWR, color_data, len);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_invert_color(esp_lcd_panel_t *panel, bool invert_color_data)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
int command = 0;
|
|
if (invert_color_data) {
|
|
command = LCD_CMD_INVON;
|
|
} else {
|
|
command = LCD_CMD_INVOFF;
|
|
}
|
|
esp_lcd_panel_io_tx_param(io, command, NULL, 0);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_mirror(esp_lcd_panel_t *panel, bool mirror_x, bool mirror_y)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
if (mirror_x) {
|
|
gc9a01->madctl_val |= LCD_CMD_MX_BIT;
|
|
} else {
|
|
gc9a01->madctl_val &= ~LCD_CMD_MX_BIT;
|
|
}
|
|
if (mirror_y) {
|
|
gc9a01->madctl_val |= LCD_CMD_MY_BIT;
|
|
} else {
|
|
gc9a01->madctl_val &= ~LCD_CMD_MY_BIT;
|
|
}
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
|
|
gc9a01->madctl_val
|
|
}, 1);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_swap_xy(esp_lcd_panel_t *panel, bool swap_axes)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
if (swap_axes) {
|
|
gc9a01->madctl_val |= LCD_CMD_MV_BIT;
|
|
} else {
|
|
gc9a01->madctl_val &= ~LCD_CMD_MV_BIT;
|
|
}
|
|
esp_lcd_panel_io_tx_param(io, LCD_CMD_MADCTL, (uint8_t[]) {
|
|
gc9a01->madctl_val
|
|
}, 1);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_set_gap(esp_lcd_panel_t *panel, int x_gap, int y_gap)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
gc9a01->x_gap = x_gap;
|
|
gc9a01->y_gap = y_gap;
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t panel_gc9a01_disp_on_off(esp_lcd_panel_t *panel, bool on_off)
|
|
{
|
|
gc9a01_panel_t *gc9a01 = __containerof(panel, gc9a01_panel_t, base);
|
|
esp_lcd_panel_io_handle_t io = gc9a01->io;
|
|
int command = 0;
|
|
if (on_off) {
|
|
command = LCD_CMD_DISPON;
|
|
} else {
|
|
command = LCD_CMD_DISPOFF;
|
|
}
|
|
esp_lcd_panel_io_tx_param(io, command, NULL, 0);
|
|
return ESP_OK;
|
|
}
|