esp-idf/components/esp_system/startup.c

478 wiersze
15 KiB
C

// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include <stdint.h>
#include <string.h>
#include "esp_attr.h"
#include "esp_err.h"
#include "esp_system.h"
#include "esp_log.h"
#include "esp_ota_ops.h"
#include "sdkconfig.h"
#include "soc/soc_caps.h"
#include "hal/wdt_hal.h"
#include "hal/uart_types.h"
#include "hal/uart_ll.h"
#include "esp_system.h"
#include "esp_log.h"
#include "esp_heap_caps_init.h"
#include "esp_spi_flash.h"
#include "esp_flash_internal.h"
#include "esp_newlib.h"
#include "esp_vfs_dev.h"
#include "esp_timer.h"
#include "esp_efuse.h"
#include "esp_flash_encrypt.h"
#include "esp_secure_boot.h"
#include "esp_sleep.h"
/***********************************************/
// Headers for other components init functions
#include "nvs_flash.h"
#include "esp_phy_init.h"
#include "esp_coexist_internal.h"
#if CONFIG_ESP_COREDUMP_ENABLE
#include "esp_core_dump.h"
#endif
#include "esp_app_trace.h"
#include "esp_private/dbg_stubs.h"
#include "esp_pm.h"
#include "esp_private/pm_impl.h"
#include "esp_pthread.h"
#include "esp_private/usb_console.h"
#include "esp_vfs_cdcacm.h"
#include "esp_vfs_usb_serial_jtag.h"
#include "brownout.h"
#include "esp_rom_sys.h"
// [refactor-todo] make this file completely target-independent
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/clk.h"
#include "esp32/spiram.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/clk.h"
#include "esp32s2/spiram.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/clk.h"
#include "esp32s3/spiram.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/clk.h"
#elif CONFIG_IDF_TARGET_ESP32H2
#include "esp32h2/clk.h"
#endif
/***********************************************/
#include "esp_private/startup_internal.h"
// Ensure that system configuration matches the underlying number of cores.
// This should enable us to avoid checking for both everytime.
#if !(SOC_CPU_CORES_NUM > 1) && !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
#error "System has been configured to run on multiple cores, but target SoC only has a single core."
#endif
#define STRINGIFY(s) STRINGIFY2(s)
#define STRINGIFY2(s) #s
uint64_t g_startup_time = 0;
#if SOC_APB_BACKUP_DMA
// APB DMA lock initialising API
extern void esp_apb_backup_dma_lock_init(void);
#endif
// App entry point for core 0
extern void esp_startup_start_app(void);
// Entry point for core 0 from hardware init (port layer)
void start_cpu0(void) __attribute__((weak, alias("start_cpu0_default"))) __attribute__((noreturn));
#if !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
// Entry point for core [1..X] from hardware init (port layer)
void start_cpu_other_cores(void) __attribute__((weak, alias("start_cpu_other_cores_default"))) __attribute__((noreturn));
// App entry point for core [1..X]
void esp_startup_start_app_other_cores(void) __attribute__((weak, alias("esp_startup_start_app_other_cores_default"))) __attribute__((noreturn));
static volatile bool s_system_inited[SOC_CPU_CORES_NUM] = { false };
const sys_startup_fn_t g_startup_fn[SOC_CPU_CORES_NUM] = { [0] = start_cpu0,
#if SOC_CPU_CORES_NUM > 1
[1 ... SOC_CPU_CORES_NUM - 1] = start_cpu_other_cores
#endif
};
static volatile bool s_system_full_inited = false;
#else
const sys_startup_fn_t g_startup_fn[1] = { start_cpu0 };
#endif
#ifdef CONFIG_COMPILER_CXX_EXCEPTIONS
// workaround for C++ exception crashes
void _Unwind_SetNoFunctionContextInstall(unsigned char enable) __attribute__((weak, alias("_Unwind_SetNoFunctionContextInstall_Default")));
// workaround for C++ exception large memory allocation
void _Unwind_SetEnableExceptionFdeSorting(unsigned char enable);
static IRAM_ATTR void _Unwind_SetNoFunctionContextInstall_Default(unsigned char enable __attribute__((unused)))
{
(void)0;
}
#endif // CONFIG_COMPILER_CXX_EXCEPTIONS
static const char* TAG = "cpu_start";
/**
* This function overwrites a the same function of libsupc++ (part of libstdc++).
* Consequently, libsupc++ will then follow our configured exception emergency pool size.
*
* It will be called even with -fno-exception for user code since the stdlib still uses exceptions.
*/
size_t __cxx_eh_arena_size_get(void)
{
#ifdef CONFIG_COMPILER_CXX_EXCEPTIONS
return CONFIG_COMPILER_CXX_EXCEPTIONS_EMG_POOL_SIZE;
#else
return 0;
#endif
}
/**
* Xtensa gcc is configured to emit a .ctors section, RISC-V gcc is configured with --enable-initfini-array
* so it emits an .init_array section instead.
* But the init_priority sections will be sorted for iteration in ascending order during startup.
* The rest of the init_array sections is sorted for iteration in descending order during startup, however.
* Hence a different section is generated for the init_priority functions which is looped
* over in ascending direction instead of descending direction.
* The RISC-V-specific behavior is dependent on the linker script esp32c3.project.ld.in.
*/
static void do_global_ctors(void)
{
#if __riscv
extern void (*__init_priority_array_start)(void);
extern void (*__init_priority_array_end)(void);
#endif
extern void (*__init_array_start)(void);
extern void (*__init_array_end)(void);
#ifdef CONFIG_COMPILER_CXX_EXCEPTIONS
struct object { long placeholder[ 10 ]; };
void __register_frame_info (const void *begin, struct object *ob);
extern char __eh_frame[];
static struct object ob;
__register_frame_info( __eh_frame, &ob );
#endif // CONFIG_COMPILER_CXX_EXCEPTIONS
void (**p)(void);
#if __riscv
for (p = &__init_priority_array_start; p < &__init_priority_array_end; ++p) {
ESP_EARLY_LOGD(TAG, "calling init function: %p", *p);
(*p)();
}
#endif
for (p = &__init_array_end - 1; p >= &__init_array_start; --p) {
ESP_EARLY_LOGD(TAG, "calling init function: %p", *p);
(*p)();
}
}
static void do_system_init_fn(void)
{
extern esp_system_init_fn_t _esp_system_init_fn_array_start;
extern esp_system_init_fn_t _esp_system_init_fn_array_end;
esp_system_init_fn_t *p;
for (p = &_esp_system_init_fn_array_end - 1; p >= &_esp_system_init_fn_array_start; --p) {
if (p->cores & BIT(cpu_hal_get_core_id())) {
(*(p->fn))();
}
}
#if !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
s_system_inited[cpu_hal_get_core_id()] = true;
#endif
}
#if !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
static void esp_startup_start_app_other_cores_default(void)
{
while (1) {
esp_rom_delay_us(UINT32_MAX);
}
}
static void IRAM_ATTR start_cpu_other_cores_default(void)
{
do_system_init_fn();
while (!s_system_full_inited) {
esp_rom_delay_us(100);
}
esp_startup_start_app_other_cores();
}
#endif
static void do_core_init(void)
{
/* Initialize heap allocator. WARNING: This *needs* to happen *after* the app cpu has booted.
If the heap allocator is initialized first, it will put free memory linked list items into
memory also used by the ROM. Starting the app cpu will let its ROM initialize that memory,
corrupting those linked lists. Initializing the allocator *after* the app cpu has booted
works around this problem.
With SPI RAM enabled, there's a second reason: half of the SPI RAM will be managed by the
app CPU, and when that is not up yet, the memory will be inaccessible and heap_caps_init may
fail initializing it properly. */
heap_caps_init();
esp_newlib_init();
esp_newlib_time_init();
if (g_spiram_ok) {
#if CONFIG_SPIRAM_BOOT_INIT && (CONFIG_SPIRAM_USE_CAPS_ALLOC || CONFIG_SPIRAM_USE_MALLOC)
esp_err_t r=esp_spiram_add_to_heapalloc();
if (r != ESP_OK) {
ESP_EARLY_LOGE(TAG, "External RAM could not be added to heap!");
abort();
}
#if CONFIG_SPIRAM_USE_MALLOC
heap_caps_malloc_extmem_enable(CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL);
#endif
#endif
}
#if CONFIG_ESP32_BROWNOUT_DET || \
CONFIG_ESP32S2_BROWNOUT_DET || \
CONFIG_ESP32S3_BROWNOUT_DET || \
CONFIG_ESP32C3_BROWNOUT_DET || \
CONFIG_ESP32H2_BROWNOUT_DET
// [refactor-todo] leads to call chain rtc_is_register (driver) -> esp_intr_alloc (esp32/esp32s2) ->
// malloc (newlib) -> heap_caps_malloc (heap), so heap must be at least initialized
esp_brownout_init();
#endif
#ifdef CONFIG_VFS_SUPPORT_IO
#ifdef CONFIG_ESP_CONSOLE_UART
esp_vfs_dev_uart_register();
const char *default_stdio_dev = "/dev/uart/" STRINGIFY(CONFIG_ESP_CONSOLE_UART_NUM);
#endif // CONFIG_ESP_CONSOLE_UART
#ifdef CONFIG_ESP_CONSOLE_USB_CDC
ESP_ERROR_CHECK(esp_usb_console_init());
ESP_ERROR_CHECK(esp_vfs_dev_cdcacm_register());
const char *default_stdio_dev = "/dev/cdcacm";
#endif // CONFIG_ESP_CONSOLE_USB_CDC
#ifdef CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
ESP_ERROR_CHECK(esp_vfs_dev_usb_serial_jtag_register());
const char *default_stdio_dev = "/dev/usbserjtag";
#endif // CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG
#endif // CONFIG_VFS_SUPPORT_IO
#if defined(CONFIG_VFS_SUPPORT_IO) && !defined(CONFIG_ESP_CONSOLE_NONE)
esp_reent_init(_GLOBAL_REENT);
_GLOBAL_REENT->_stdin = fopen(default_stdio_dev, "r");
_GLOBAL_REENT->_stdout = fopen(default_stdio_dev, "w");
_GLOBAL_REENT->_stderr = fopen(default_stdio_dev, "w");
#else // defined(CONFIG_VFS_SUPPORT_IO) && !defined(CONFIG_ESP_CONSOLE_NONE)
_REENT_SMALL_CHECK_INIT(_GLOBAL_REENT);
#endif // defined(CONFIG_VFS_SUPPORT_IO) && !defined(CONFIG_ESP_CONSOLE_NONE)
esp_err_t err __attribute__((unused));
err = esp_pthread_init();
assert(err == ESP_OK && "Failed to init pthread module!");
spi_flash_init();
/* init default OS-aware flash access critical section */
spi_flash_guard_set(&g_flash_guard_default_ops);
esp_flash_app_init();
esp_err_t flash_ret = esp_flash_init_default_chip();
assert(flash_ret == ESP_OK);
(void)flash_ret;
#ifdef CONFIG_EFUSE_VIRTUAL
ESP_LOGW(TAG, "eFuse virtual mode is enabled. If Secure boot or Flash encryption is enabled then it does not provide any security. FOR TESTING ONLY!");
#ifdef CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH
const esp_partition_t *efuse_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_EFUSE_EM, NULL);
if (efuse_partition) {
esp_efuse_init_virtual_mode_in_flash(efuse_partition->address, efuse_partition->size);
}
#endif
#endif
#if CONFIG_SECURE_DISABLE_ROM_DL_MODE
err = esp_efuse_disable_rom_download_mode();
assert(err == ESP_OK && "Failed to disable ROM download mode");
#endif
#if CONFIG_SECURE_ENABLE_SECURE_ROM_DL_MODE
err = esp_efuse_enable_rom_secure_download_mode();
assert(err == ESP_OK && "Failed to enable Secure Download mode");
#endif
#if CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE
esp_efuse_disable_basic_rom_console();
#endif
#ifdef CONFIG_SECURE_FLASH_ENC_ENABLED
esp_flash_encryption_init_checks();
#endif
#if defined(CONFIG_SECURE_BOOT) || defined(CONFIG_SECURE_SIGNED_ON_UPDATE_NO_SECURE_BOOT)
// Note: in some configs this may read flash, so placed after flash init
esp_secure_boot_init_checks();
#endif
}
static void do_secondary_init(void)
{
#if !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
// The port layer transferred control to this function with other cores 'paused',
// resume execution so that cores might execute component initialization functions.
startup_resume_other_cores();
#endif
// Execute initialization functions esp_system_init_fn_t assigned to the main core. While
// this is happening, all other cores are executing the initialization functions
// assigned to them since they have been resumed already.
do_system_init_fn();
#if !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
// Wait for all cores to finish secondary init.
volatile bool system_inited = false;
while (!system_inited) {
system_inited = true;
for (int i = 0; i < SOC_CPU_CORES_NUM; i++) {
system_inited &= s_system_inited[i];
}
esp_rom_delay_us(100);
}
#endif
}
static void start_cpu0_default(void)
{
ESP_EARLY_LOGI(TAG, "Pro cpu start user code");
int cpu_freq = esp_clk_cpu_freq();
ESP_EARLY_LOGI(TAG, "cpu freq: %d", cpu_freq);
// Display information about the current running image.
if (LOG_LOCAL_LEVEL >= ESP_LOG_INFO) {
const esp_app_desc_t *app_desc = esp_ota_get_app_description();
ESP_EARLY_LOGI(TAG, "Application information:");
#ifndef CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR
ESP_EARLY_LOGI(TAG, "Project name: %s", app_desc->project_name);
#endif
#ifndef CONFIG_APP_EXCLUDE_PROJECT_VER_VAR
ESP_EARLY_LOGI(TAG, "App version: %s", app_desc->version);
#endif
#ifdef CONFIG_BOOTLOADER_APP_SECURE_VERSION
ESP_EARLY_LOGI(TAG, "Secure version: %d", app_desc->secure_version);
#endif
#ifdef CONFIG_APP_COMPILE_TIME_DATE
ESP_EARLY_LOGI(TAG, "Compile time: %s %s", app_desc->date, app_desc->time);
#endif
char buf[17];
esp_ota_get_app_elf_sha256(buf, sizeof(buf));
ESP_EARLY_LOGI(TAG, "ELF file SHA256: %s...", buf);
ESP_EARLY_LOGI(TAG, "ESP-IDF: %s", app_desc->idf_ver);
}
// Initialize core components and services.
do_core_init();
// Execute constructors.
do_global_ctors();
// Execute init functions of other components; blocks
// until all cores finish (when !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE).
do_secondary_init();
// Now that the application is about to start, disable boot watchdog
#ifndef CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE
wdt_hal_context_t rtc_wdt_ctx = {.inst = WDT_RWDT, .rwdt_dev = &RTCCNTL};
wdt_hal_write_protect_disable(&rtc_wdt_ctx);
wdt_hal_disable(&rtc_wdt_ctx);
wdt_hal_write_protect_enable(&rtc_wdt_ctx);
#endif
#if SOC_CPU_CORES_NUM > 1 && !CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE
s_system_full_inited = true;
#endif
esp_startup_start_app();
while (1);
}
IRAM_ATTR ESP_SYSTEM_INIT_FN(init_components0, BIT(0))
{
esp_timer_init();
#if CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND && !CONFIG_PM_SLP_DISABLE_GPIO
// Configure to isolate (disable the Input/Output/Pullup/Pulldown
// function of the pin) all GPIO pins in sleep state
esp_sleep_config_gpio_isolate();
// Enable automatic switching of GPIO configuration
esp_sleep_enable_gpio_switch(true);
#endif
#if CONFIG_APPTRACE_ENABLE
esp_err_t err = esp_apptrace_init();
assert(err == ESP_OK && "Failed to init apptrace module on PRO CPU!");
#endif
#if CONFIG_APPTRACE_SV_ENABLE
SEGGER_SYSVIEW_Conf();
#endif
#if CONFIG_ESP_DEBUG_STUBS_ENABLE
esp_dbg_stubs_init();
#endif
#if defined(CONFIG_PM_ENABLE)
esp_pm_impl_init();
#endif
#if CONFIG_ESP_COREDUMP_ENABLE
esp_core_dump_init();
#endif
#if SOC_APB_BACKUP_DMA
esp_apb_backup_dma_lock_init();
#endif
#if CONFIG_SW_COEXIST_ENABLE
esp_coex_adapter_register(&g_coex_adapter_funcs);
coex_pre_init();
#endif
#ifdef CONFIG_COMPILER_CXX_EXCEPTIONS
ESP_EARLY_LOGD(TAG, "Setting C++ exception workarounds.");
_Unwind_SetNoFunctionContextInstall(1);
_Unwind_SetEnableExceptionFdeSorting(0);
#endif // CONFIG_COMPILER_CXX_EXCEPTIONS
}