kopia lustrzana https://github.com/espressif/esp-idf
394 wiersze
18 KiB
Plaintext
394 wiersze
18 KiB
Plaintext
|
|
menu "Wi-Fi"
|
|
|
|
config ESP32_WIFI_SW_COEXIST_ENABLE
|
|
bool "Software controls WiFi/Bluetooth coexistence"
|
|
depends on BT_ENABLED
|
|
default y
|
|
help
|
|
If enabled, WiFi & Bluetooth coexistence is controlled by software rather than hardware.
|
|
Recommended for heavy traffic scenarios. Both coexistence configuration options are
|
|
automatically managed, no user intervention is required.
|
|
If only Bluetooth is used, it is recommended to disable this option to reduce binary file
|
|
size.
|
|
|
|
config ESP32_WIFI_STATIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi static RX buffers"
|
|
range 2 25
|
|
default 10 if !SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
default 16 if SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
help
|
|
Set the number of WiFi static RX buffers. Each buffer takes approximately 1.6KB of RAM.
|
|
The static rx buffers are allocated when esp_wifi_init is called, they are not freed
|
|
until esp_wifi_deinit is called.
|
|
|
|
WiFi hardware use these buffers to receive all 802.11 frames.
|
|
A higher number may allow higher throughput but increases memory use. If ESP32_WIFI_AMPDU_RX_ENABLED
|
|
is enabled, this value is recommended to set equal or bigger than ESP32_WIFI_RX_BA_WIN in order to
|
|
achieve better throughput and compatibility with both stations and APs.
|
|
|
|
config ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic RX buffers"
|
|
range 0 128 if !LWIP_WND_SCALE
|
|
range 0 1024 if LWIP_WND_SCALE
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic RX buffers, 0 means unlimited RX buffers will be allocated
|
|
(provided sufficient free RAM). The size of each dynamic RX buffer depends on the size of
|
|
the received data frame.
|
|
|
|
For each received data frame, the WiFi driver makes a copy to an RX buffer and then delivers
|
|
it to the high layer TCP/IP stack. The dynamic RX buffer is freed after the higher layer has
|
|
successfully received the data frame.
|
|
|
|
For some applications, WiFi data frames may be received faster than the application can
|
|
process them. In these cases we may run out of memory if RX buffer number is unlimited (0).
|
|
|
|
If a dynamic RX buffer limit is set, it should be at least the number of static RX buffers.
|
|
|
|
choice ESP32_WIFI_TX_BUFFER
|
|
prompt "Type of WiFi TX buffers"
|
|
default ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
help
|
|
Select type of WiFi TX buffers:
|
|
|
|
If "Static" is selected, WiFi TX buffers are allocated when WiFi is initialized and released
|
|
when WiFi is de-initialized. The size of each static TX buffer is fixed to about 1.6KB.
|
|
|
|
If "Dynamic" is selected, each WiFi TX buffer is allocated as needed when a data frame is
|
|
delivered to the Wifi driver from the TCP/IP stack. The buffer is freed after the data frame
|
|
has been sent by the WiFi driver. The size of each dynamic TX buffer depends on the length
|
|
of each data frame sent by the TCP/IP layer.
|
|
|
|
If PSRAM is enabled, "Static" should be selected to guarantee enough WiFi TX buffers.
|
|
If PSRAM is disabled, "Dynamic" should be selected to improve the utilization of RAM.
|
|
|
|
config ESP32_WIFI_STATIC_TX_BUFFER
|
|
bool "Static"
|
|
config ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
bool "Dynamic"
|
|
depends on !SPIRAM_USE_MALLOC
|
|
endchoice
|
|
|
|
config ESP32_WIFI_TX_BUFFER_TYPE
|
|
int
|
|
default 0 if ESP32_WIFI_STATIC_TX_BUFFER
|
|
default 1 if ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
|
|
config ESP32_WIFI_STATIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi static TX buffers"
|
|
depends on ESP32_WIFI_STATIC_TX_BUFFER
|
|
range 1 64
|
|
default 16
|
|
help
|
|
Set the number of WiFi static TX buffers. Each buffer takes approximately 1.6KB of RAM.
|
|
The static RX buffers are allocated when esp_wifi_init() is called, they are not released
|
|
until esp_wifi_deinit() is called.
|
|
|
|
For each transmitted data frame from the higher layer TCP/IP stack, the WiFi driver makes a
|
|
copy of it in a TX buffer. For some applications especially UDP applications, the upper
|
|
layer can deliver frames faster than WiFi layer can transmit. In these cases, we may run out
|
|
of TX buffers.
|
|
|
|
config ESP32_WIFI_CACHE_TX_BUFFER_NUM
|
|
int "Max number of WiFi cache TX buffers"
|
|
depends on (ESP32_SPIRAM_SUPPORT || ESP32S2_SPIRAM_SUPPORT)
|
|
range 16 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi cache TX buffer number.
|
|
|
|
For each TX packet from uplayer, such as LWIP etc, WiFi driver needs to allocate a static TX
|
|
buffer and makes a copy of uplayer packet. If WiFi driver fails to allocate the static TX buffer,
|
|
it caches the uplayer packets to a dedicated buffer queue, this option is used to configure the
|
|
size of the cached TX queue.
|
|
|
|
config ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM
|
|
int "Max number of WiFi dynamic TX buffers"
|
|
depends on ESP32_WIFI_DYNAMIC_TX_BUFFER
|
|
range 1 128
|
|
default 32
|
|
help
|
|
Set the number of WiFi dynamic TX buffers. The size of each dynamic TX buffer is not fixed,
|
|
it depends on the size of each transmitted data frame.
|
|
|
|
For each transmitted frame from the higher layer TCP/IP stack, the WiFi driver makes a copy
|
|
of it in a TX buffer. For some applications, especially UDP applications, the upper layer
|
|
can deliver frames faster than WiFi layer can transmit. In these cases, we may run out of TX
|
|
buffers.
|
|
|
|
config ESP32_WIFI_CSI_ENABLED
|
|
bool "WiFi CSI(Channel State Information)"
|
|
default n
|
|
help
|
|
Select this option to enable CSI(Channel State Information) feature. CSI takes about
|
|
CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM KB of RAM. If CSI is not used, it is better to disable
|
|
this feature in order to save memory.
|
|
|
|
config ESP32_WIFI_AMPDU_TX_ENABLED
|
|
bool "WiFi AMPDU TX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU TX feature
|
|
|
|
|
|
config ESP32_WIFI_TX_BA_WIN
|
|
int "WiFi AMPDU TX BA window size"
|
|
depends on ESP32_WIFI_AMPDU_TX_ENABLED
|
|
range 2 32
|
|
default 6
|
|
help
|
|
Set the size of WiFi Block Ack TX window. Generally a bigger value means higher throughput but
|
|
more memory. Most of time we should NOT change the default value unless special reason, e.g.
|
|
test the maximum UDP TX throughput with iperf etc. For iperf test in shieldbox, the recommended
|
|
value is 9~12.
|
|
|
|
config ESP32_WIFI_AMPDU_RX_ENABLED
|
|
bool "WiFi AMPDU RX"
|
|
default y
|
|
help
|
|
Select this option to enable AMPDU RX feature
|
|
|
|
config ESP32_WIFI_RX_BA_WIN
|
|
int "WiFi AMPDU RX BA window size"
|
|
depends on ESP32_WIFI_AMPDU_RX_ENABLED
|
|
range 2 32
|
|
default 6 if !SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
default 16 if SPIRAM_TRY_ALLOCATE_WIFI_LWIP
|
|
help
|
|
Set the size of WiFi Block Ack RX window. Generally a bigger value means higher throughput and better
|
|
compatibility but more memory. Most of time we should NOT change the default value unless special
|
|
reason, e.g. test the maximum UDP RX throughput with iperf etc. For iperf test in shieldbox, the
|
|
recommended value is 9~12. If PSRAM is used and WiFi memory is prefered to allocat in PSRAM first,
|
|
the default and minimum value should be 16 to achieve better throughput and compatibility with both
|
|
stations and APs.
|
|
|
|
config ESP32_WIFI_NVS_ENABLED
|
|
bool "WiFi NVS flash"
|
|
default y
|
|
help
|
|
Select this option to enable WiFi NVS flash
|
|
|
|
choice ESP32_WIFI_TASK_CORE_ID
|
|
depends on !FREERTOS_UNICORE
|
|
prompt "WiFi Task Core ID"
|
|
default ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
|
help
|
|
Pinned WiFi task to core 0 or core 1.
|
|
|
|
config ESP32_WIFI_TASK_PINNED_TO_CORE_0
|
|
bool "Core 0"
|
|
config ESP32_WIFI_TASK_PINNED_TO_CORE_1
|
|
bool "Core 1"
|
|
endchoice
|
|
|
|
config ESP32_WIFI_SOFTAP_BEACON_MAX_LEN
|
|
int "Max length of WiFi SoftAP Beacon"
|
|
range 752 1256
|
|
default 752
|
|
help
|
|
ESP-MESH utilizes beacon frames to detect and resolve root node conflicts (see documentation). However the
|
|
default length of a beacon frame can simultaneously hold only five root node identifier structures,
|
|
meaning that a root node conflict of up to five nodes can be detected at one time. In the occurence of
|
|
more root nodes conflict involving more than five root nodes, the conflict resolution process will detect
|
|
five of the root nodes, resolve the conflict, and re-detect more root nodes. This process will repeat
|
|
until all root node conflicts are resolved. However this process can generally take a very long time.
|
|
|
|
To counter this situation, the beacon frame length can be increased such that more root nodes can be
|
|
detected simultaneously. Each additional root node will require 36 bytes and should be added ontop of the
|
|
default beacon frame length of
|
|
752 bytes. For example, if you want to detect 10 root nodes simultaneously, you need to set the beacon
|
|
frame length as
|
|
932 (752+36*5).
|
|
|
|
Setting a longer beacon length also assists with debugging as the conflicting root nodes can be identified
|
|
more quickly.
|
|
|
|
config ESP32_WIFI_MGMT_SBUF_NUM
|
|
int "WiFi mgmt short buffer number"
|
|
range 6 32
|
|
default 32
|
|
help
|
|
Set the number of WiFi management short buffer.
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_ENABLE
|
|
bool "Enable WiFi debug log"
|
|
default n
|
|
help
|
|
Select this option to enable WiFi debug log
|
|
|
|
choice ESP32_WIFI_DEBUG_LOG_LEVEL
|
|
depends on ESP32_WIFI_DEBUG_LOG_ENABLE
|
|
prompt "WiFi debug log level"
|
|
default ESP32_WIFI_DEBUG_LOG_DEBUG
|
|
help
|
|
The WiFi log is divided into the following levels: ERROR,WARNING,INFO,DEBUG,VERBOSE.
|
|
The ERROR,WARNING,INFO levels are enabled by default, and the DEBUG,VERBOSE levels can be enabled here.
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_DEBUG
|
|
bool "WiFi Debug Log Debug"
|
|
config ESP32_WIFI_DEBUG_LOG_VERBOSE
|
|
bool "WiFi Debug Log Verbose"
|
|
endchoice
|
|
|
|
choice ESP32_WIFI_DEBUG_LOG_MODULE
|
|
depends on ESP32_WIFI_DEBUG_LOG_ENABLE
|
|
prompt "WiFi debug log module"
|
|
default ESP32_WIFI_DEBUG_LOG_MODULE_WIFI
|
|
help
|
|
The WiFi log module contains three parts: WIFI,COEX,MESH. The WIFI module indicates the logs related to
|
|
WiFi, the COEX module indicates the logs related to WiFi and BT(or BLE) coexist, the MESH module indicates
|
|
the logs related to Mesh. When ESP32_WIFI_LOG_MODULE_ALL is enabled, all modules are selected.
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_MODULE_ALL
|
|
bool "WiFi Debug Log Module All"
|
|
config ESP32_WIFI_DEBUG_LOG_MODULE_WIFI
|
|
bool "WiFi Debug Log Module WiFi"
|
|
config ESP32_WIFI_DEBUG_LOG_MODULE_COEX
|
|
bool "WiFi Debug Log Module Coex"
|
|
config ESP32_WIFI_DEBUG_LOG_MODULE_MESH
|
|
bool "WiFi Debug Log Module Mesh"
|
|
endchoice
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_SUBMODULE
|
|
depends on ESP32_WIFI_DEBUG_LOG_ENABLE
|
|
bool "WiFi debug log submodule"
|
|
default n
|
|
help
|
|
Enable this option to set the WiFi debug log submodule.
|
|
Currently the log submodule contains the following parts: INIT,IOCTL,CONN,SCAN.
|
|
The INIT submodule indicates the initialization process.The IOCTL submodule indicates the API calling
|
|
process.
|
|
The CONN submodule indicates the connecting process.The SCAN submodule indicates the scaning process.
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_SUBMODULE_ALL
|
|
depends on ESP32_WIFI_DEBUG_LOG_SUBMODULE
|
|
bool "WiFi Debug Log Submodule All"
|
|
default n
|
|
help
|
|
When this option is enabled, all debug submodules are selected.
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_SUBMODULE_INIT
|
|
depends on ESP32_WIFI_DEBUG_LOG_SUBMODULE && (!ESP32_WIFI_DEBUG_LOG_SUBMODULE_ALL)
|
|
bool "WiFi Debug Log Submodule Init"
|
|
default n
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_SUBMODULE_IOCTL
|
|
depends on ESP32_WIFI_DEBUG_LOG_SUBMODULE && (!ESP32_WIFI_DEBUG_LOG_SUBMODULE_ALL)
|
|
bool "WiFi Debug Log Submodule Ioctl"
|
|
default n
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_SUBMODULE_CONN
|
|
depends on ESP32_WIFI_DEBUG_LOG_SUBMODULE && (!ESP32_WIFI_DEBUG_LOG_SUBMODULE_ALL)
|
|
bool "WiFi Debug Log Submodule Conn"
|
|
default n
|
|
|
|
config ESP32_WIFI_DEBUG_LOG_SUBMODULE_SCAN
|
|
depends on ESP32_WIFI_DEBUG_LOG_SUBMODULE && (!ESP32_WIFI_DEBUG_LOG_SUBMODULE_ALL)
|
|
bool "WiFi Debug Log Submodule Scan"
|
|
default n
|
|
|
|
config ESP32_WIFI_IRAM_OPT
|
|
bool "WiFi IRAM speed optimization"
|
|
default n if (BT_ENABLED && ESP32_SPIRAM_SUPPORT)
|
|
default y
|
|
help
|
|
Select this option to place frequently called Wi-Fi library functions in IRAM.
|
|
When this option is disabled, more than 10Kbytes of IRAM memory will be saved
|
|
but Wi-Fi throughput will be reduced.
|
|
|
|
config ESP32_WIFI_RX_IRAM_OPT
|
|
bool "WiFi RX IRAM speed optimization"
|
|
default n if (BT_ENABLED && ESP32_SPIRAM_SUPPORT)
|
|
default y
|
|
help
|
|
Select this option to place frequently called Wi-Fi library RX functions in IRAM.
|
|
When this option is disabled, more than 17Kbytes of IRAM memory will be saved
|
|
but Wi-Fi performance will be reduced.
|
|
|
|
config ESP32_WIFI_ENABLE_WPA3_SAE
|
|
bool "Enable WPA3-Personal"
|
|
default y
|
|
help
|
|
Select this option to allow the device to establish a WPA3-Personal connection with eligible AP's.
|
|
PMF (Protected Management Frames) is a prerequisite feature for a WPA3 connection, it needs to be
|
|
explicitly configured before attempting connection. Please refer to the Wi-Fi Driver API Guide for details.
|
|
|
|
endmenu # Wi-Fi
|
|
|
|
menu "PHY"
|
|
|
|
config ESP32_PHY_CALIBRATION_AND_DATA_STORAGE
|
|
# ToDo: remove target dependency once NVS and PHY partial calibration are supported
|
|
# also re-enable the <RF_calibration> entry in docs/../api-guides/index.rst
|
|
depends on IDF_TARGET_ESP32
|
|
bool "Store phy calibration data in NVS"
|
|
default y
|
|
help
|
|
If this option is enabled, NVS will be initialized and calibration data will be loaded from there.
|
|
PHY calibration will be skipped on deep sleep wakeup. If calibration data is not found, full calibration
|
|
will be performed and stored in NVS. Normally, only partial calibration will be performed.
|
|
If this option is disabled, full calibration will be performed.
|
|
|
|
If it's easy that your board calibrate bad data, choose 'n'.
|
|
Two cases for example, you should choose 'n':
|
|
1.If your board is easy to be booted up with antenna disconnected.
|
|
2.Because of your board design, each time when you do calibration, the result are too unstable.
|
|
If unsure, choose 'y'.
|
|
|
|
menuconfig ESP32_PHY_INIT_DATA_IN_PARTITION
|
|
bool "Use a partition to store PHY init data"
|
|
default n
|
|
help
|
|
If enabled, PHY init data will be loaded from a partition.
|
|
When using a custom partition table, make sure that PHY data
|
|
partition is included (type: 'data', subtype: 'phy').
|
|
With default partition tables, this is done automatically.
|
|
If PHY init data is stored in a partition, it has to be flashed there,
|
|
otherwise runtime error will occur.
|
|
|
|
If this option is not enabled, PHY init data will be embedded
|
|
into the application binary.
|
|
|
|
If unsure, choose 'n'.
|
|
|
|
if ESP32_PHY_INIT_DATA_IN_PARTITION
|
|
config ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
|
|
bool "Support multiple PHY init data bin"
|
|
depends on ESP32_PHY_INIT_DATA_IN_PARTITION
|
|
default n
|
|
help
|
|
If enabled, the corresponding PHY init data type can be automatically switched
|
|
according to the country code. China's PHY init data bin is used by default.
|
|
Can be modified by country information in API esp_wifi_set_country().
|
|
The priority of switching the PHY init data type is:
|
|
1. Country configured by API esp_wifi_set_country()
|
|
and the parameter policy is WIFI_COUNTRY_POLICY_MANUAL.
|
|
2. Country notified by the connected AP.
|
|
3. Country configured by API esp_wifi_set_country()
|
|
and the parameter policy is WIFI_COUNTRY_POLICY_AUTO.
|
|
|
|
config ESP32_PHY_INIT_DATA_ERROR
|
|
bool "Terminate operation when PHY init data error"
|
|
depends on ESP32_SUPPORT_MULTIPLE_PHY_INIT_DATA_BIN
|
|
default n
|
|
help
|
|
If enabled, when an error occurs while the PHY init data is updated,
|
|
the program will terminate and restart.
|
|
If not enabled, the PHY init data will not be updated when an error occurs.
|
|
endif
|
|
|
|
config ESP32_PHY_MAX_WIFI_TX_POWER
|
|
int "Max WiFi TX power (dBm)"
|
|
range 10 20
|
|
default 20
|
|
help
|
|
Set maximum transmit power for WiFi radio. Actual transmit power for high
|
|
data rates may be lower than this setting.
|
|
|
|
config ESP32_PHY_MAX_TX_POWER
|
|
int
|
|
default ESP32_PHY_MAX_WIFI_TX_POWER
|
|
|
|
endmenu # PHY
|