esp-idf/components/xtensa/include/xtensa-debug-module.h

116 wiersze
6.3 KiB
C
Czysty Wina Historia

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

#ifndef XTENSA_DEBUG_MODULE_H
#define XTENSA_DEBUG_MODULE_H
/*
ERI registers / OCD offsets and field definitions
*/
#define ERI_DEBUG_OFFSET 0x100000
#define ERI_TRAX_OFFSET (ERI_DEBUG_OFFSET+0)
#define ERI_PERFMON_OFFSET (ERI_DEBUG_OFFSET+0x1000)
#define ERI_OCDREG_OFFSET (ERI_DEBUG_OFFSET+0x2000)
#define ERI_MISCDBG_OFFSET (ERI_DEBUG_OFFSET+0x3000)
#define ERI_CORESIGHT_OFFSET (ERI_DEBUG_OFFSET+0x3F00)
#define ERI_TRAX_TRAXID (ERI_TRAX_OFFSET+0x00)
#define ERI_TRAX_TRAXCTRL (ERI_TRAX_OFFSET+0x04)
#define ERI_TRAX_TRAXSTAT (ERI_TRAX_OFFSET+0x08)
#define ERI_TRAX_TRAXDATA (ERI_TRAX_OFFSET+0x0C)
#define ERI_TRAX_TRAXADDR (ERI_TRAX_OFFSET+0x10)
#define ERI_TRAX_TRIGGERPC (ERI_TRAX_OFFSET+0x14)
#define ERI_TRAX_PCMATCHCTRL (ERI_TRAX_OFFSET+0x18)
#define ERI_TRAX_DELAYCNT (ERI_TRAX_OFFSET+0x1C)
#define ERI_TRAX_MEMADDRSTART (ERI_TRAX_OFFSET+0x20)
#define ERI_TRAX_MEMADDREND (ERI_TRAX_OFFSET+0x24)
#define TRAXCTRL_TREN (1<<0) //Trace enable. Tracing starts on 0->1
#define TRAXCTRL_TRSTP (1<<1) //Trace Stop. Make 1 to stop trace.
#define TRAXCTRL_PCMEN (1<<2) //PC match enable
#define TRAXCTRL_PTIEN (1<<4) //Processor-trigger enable
#define TRAXCTRL_CTIEN (1<<5) //Cross-trigger enable
#define TRAXCTRL_TMEN (1<<7) //Tracemem Enable. Always set.
#define TRAXCTRL_CNTU (1<<9) //Post-stop-trigger countdown units; selects when DelayCount-- happens.
//0 - every 32-bit word written to tracemem, 1 - every cpu instruction
#define TRAXCTRL_TSEN (1<<11) //Undocumented/deprecated?
#define TRAXCTRL_SMPER_SHIFT 12 //Send sync every 2^(9-smper) messages. 7=reserved, 0=no sync msg
#define TRAXCTRL_SMPER_MASK 0x7 //Synchronization message period
#define TRAXCTRL_PTOWT (1<<16) //Processor Trigger Out (OCD halt) enabled when stop triggered
#define TRAXCTRL_PTOWS (1<<17) //Processor Trigger Out (OCD halt) enabled when trace stop completes
#define TRAXCTRL_CTOWT (1<<20) //Cross-trigger Out enabled when stop triggered
#define TRAXCTRL_CTOWS (1<<21) //Cross-trigger Out enabled when trace stop completes
#define TRAXCTRL_ITCTO (1<<22) //Integration mode: cross-trigger output
#define TRAXCTRL_ITCTIA (1<<23) //Integration mode: cross-trigger ack
#define TRAXCTRL_ITATV (1<<24) //replaces ATID when in integration mode: ATVALID output
#define TRAXCTRL_ATID_MASK 0x7F //ARB source ID
#define TRAXCTRL_ATID_SHIFT 24
#define TRAXCTRL_ATEN (1<<31) //ATB interface enable
#define TRAXSTAT_TRACT (1<<0) //Trace active flag.
#define TRAXSTAT_TRIG (1<<1) //Trace stop trigger. Clears on TREN 1->0
#define TRAXSTAT_PCMTG (1<<2) //Stop trigger caused by PC match. Clears on TREN 1->0
#define TRAXSTAT_PJTR (1<<3) //JTAG transaction result. 1=err in preceding jtag transaction.
#define TRAXSTAT_PTITG (1<<4) //Stop trigger caused by Processor Trigger Input. Clears on TREN 1->0
#define TRAXSTAT_CTITG (1<<5) //Stop trigger caused by Cross-Trigger Input. Clears on TREN 1->0
#define TRAXSTAT_MEMSZ_SHIFT 8 //Traceram size inducator. Usable trace ram is 2^MEMSZ bytes.
#define TRAXSTAT_MEMSZ_MASK 0x1F
#define TRAXSTAT_PTO (1<<16) //Processor Trigger Output: current value
#define TRAXSTAT_CTO (1<<17) //Cross-Trigger Output: current value
#define TRAXSTAT_ITCTOA (1<<22) //Cross-Trigger Out Ack: current value
#define TRAXSTAT_ITCTI (1<<23) //Cross-Trigger Input: current value
#define TRAXSTAT_ITATR (1<<24) //ATREADY Input: current value
#define TRAXADDR_TADDR_SHIFT 0 //Trax memory address, in 32-bit words.
#define TRAXADDR_TADDR_MASK 0x1FFFFF //Actually is only as big as the trace buffer size max addr.
#define TRAXADDR_TWRAP_SHIFT 21 //Amount of times TADDR has overflown
#define TRAXADDR_TWRAP_MASK 0x3FF
#define TRAXADDR_TWSAT (1<<31) //1 if TWRAP has overflown, clear by disabling tren.
#define PCMATCHCTRL_PCML_SHIFT 0 //Amount of lower bits to ignore in pc trigger register
#define PCMATCHCTRL_PCML_MASK 0x1F
#define PCMATCHCTRL_PCMS (1<<31) //PC Match Sense, 0 - match when procs PC is in-range, 1 - match when
//out-of-range
// Global control/status for all performance counters
#define ERI_PERFMON_PGM (ERI_PERFMON_OFFSET+0x0000)
//PC at the cycle of the event that caused PerfMonInt assertion
#define ERI_PERFMON_INTPC (ERI_PERFMON_OFFSET+0x0010)
// Maximum amount of counter (depends on chip)
#define ERI_PERFMON_MAX XCHAL_NUM_PERF_COUNTERS
// Performance counter value
#define ERI_PERFMON_PM0 (ERI_PERFMON_OFFSET+0x0080)
// Performance counter control register
#define ERI_PERFMON_PMCTRL0 (ERI_PERFMON_OFFSET+0x0100)
// Performance counter status register
#define ERI_PERFMON_PMSTAT0 (ERI_PERFMON_OFFSET+0x0180)
#define PMCTRL_INTEN (1<<0) // Enables assertion of PerfMonInt output when overflow happens
#define PMCTRL_KRNLCNT (1<<3) // Enables counting when CINTLEVEL* >
// TRACELEVEL (i.e. If this bit is set, this counter
// counts only when CINTLEVEL >TRACELEVEL;
// if this bit is cleared, this counter counts only when
// CINTLEVEL ≤ TRACELEVEL)
#define PMCTRL_KRNLCNT_SHIFT 3
#define PMCTRL_TRACELEVEL_SHIFT 4 // Compares this value to CINTLEVEL* when deciding whether to count
#define PMCTRL_TRACELEVEL_MASK 0xf
#define PMCTRL_SELECT_SHIFT 8 // Selects input to be counted by the counter
#define PMCTRL_SELECT_MASK 0x1f
#define PMCTRL_MASK_SHIFT 16 // Selects input subsets to be counted (counter will
// increment only once even if more than one condition
// corresponding to a mask bit occurs)
#define PMCTRL_MASK_MASK 0xffff
#define PMSTAT_OVFL (1<<0) // Counter Overflow. Sticky bit set when a counter rolls over
// from 0xffffffff to 0x0.
#define PMSTAT_INTSTART (1<<4) // This counters overflow caused PerfMonInt to be asserted.
#define PGM_PMEN (1<<0) // Overall enable for all performance counting
#endif