kopia lustrzana https://github.com/espressif/esp-idf
248 wiersze
11 KiB
C
248 wiersze
11 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#include <string.h>
|
|
#include "sdkconfig.h"
|
|
#include "esp_attr.h"
|
|
#include "hal/emac_hal.h"
|
|
#include "hal/emac_ll.h"
|
|
|
|
static esp_err_t emac_hal_flush_trans_fifo(emac_hal_context_t *hal)
|
|
{
|
|
emac_ll_flush_trans_fifo_enable(hal->dma_regs, true);
|
|
/* no other writes to the Operation Mode register until the flush tx fifo bit is cleared */
|
|
for (uint32_t i = 0; i < 1000; i++) {
|
|
if (emac_ll_get_flush_trans_fifo(hal->dma_regs) == 0) {
|
|
return ESP_OK;
|
|
}
|
|
}
|
|
return ESP_ERR_TIMEOUT;
|
|
}
|
|
|
|
void emac_hal_init(emac_hal_context_t *hal)
|
|
{
|
|
hal->dma_regs = &EMAC_DMA;
|
|
hal->mac_regs = &EMAC_MAC;
|
|
#if CONFIG_IDF_TARGET_ESP32
|
|
hal->ext_regs = &EMAC_EXT;
|
|
#endif
|
|
}
|
|
|
|
void emac_hal_set_csr_clock_range(emac_hal_context_t *hal, int freq)
|
|
{
|
|
/* Tell MAC system clock Frequency in MHz, which will determine the frequency range of MDC(1MHz~2.5MHz) */
|
|
if (freq >= 20000000 && freq < 35000000) {
|
|
emac_ll_set_csr_clock_division(hal->mac_regs, 2); // CSR clock/16
|
|
} else if (freq >= 35000000 && freq < 60000000) {
|
|
emac_ll_set_csr_clock_division(hal->mac_regs, 3); // CSR clock/26
|
|
} else if (freq >= 60000000 && freq < 100000000) {
|
|
emac_ll_set_csr_clock_division(hal->mac_regs, 0); // CSR clock/42
|
|
} else if (freq >= 100000000 && freq < 150000000) {
|
|
emac_ll_set_csr_clock_division(hal->mac_regs, 1); // CSR clock/62
|
|
} else if (freq >= 150000000 && freq < 250000000) {
|
|
emac_ll_set_csr_clock_division(hal->mac_regs, 4); // CSR clock/102
|
|
} else {
|
|
emac_ll_set_csr_clock_division(hal->mac_regs, 5); // CSR clock/124
|
|
}
|
|
}
|
|
|
|
void emac_hal_set_rx_tx_desc_addr(emac_hal_context_t *hal, eth_dma_rx_descriptor_t *rx_desc, eth_dma_tx_descriptor_t *tx_desc)
|
|
{
|
|
emac_ll_set_rx_desc_addr(hal->dma_regs, (uint32_t)rx_desc);
|
|
emac_ll_set_tx_desc_addr(hal->dma_regs, (uint32_t)tx_desc);
|
|
}
|
|
|
|
void emac_hal_init_mac_default(emac_hal_context_t *hal)
|
|
{
|
|
/* MACCR Configuration */
|
|
/* Enable the watchdog on the receiver, frame longer than 2048 Bytes is not allowed */
|
|
emac_ll_watchdog_enable(hal->mac_regs, true);
|
|
/* Enable the jabber timer on the transmitter, frame longer than 2048 Bytes is not allowed */
|
|
emac_ll_jabber_enable(hal->mac_regs, true);
|
|
/* minimum IFG between frames during transmission is 96 bit times */
|
|
emac_ll_set_inter_frame_gap(hal->mac_regs, EMAC_LL_INTERFRAME_GAP_96BIT);
|
|
/* Enable Carrier Sense During Transmission */
|
|
emac_ll_carrier_sense_enable(hal->mac_regs, true);
|
|
/* Select speed: port: 10/100 Mbps, here set default 100M, afterwards, will reset by auto-negotiation */
|
|
emac_ll_set_port_speed(hal->mac_regs, ETH_SPEED_100M);
|
|
/* Allow the reception of frames when the TX_EN signal is asserted in Half-Duplex mode */
|
|
emac_ll_recv_own_enable(hal->mac_regs, true);
|
|
/* Disable internal loopback mode */
|
|
emac_ll_loopback_enable(hal->mac_regs, false);
|
|
/* Select duplex mode: here set default full duplex, afterwards, will reset by auto-negotiation */
|
|
emac_ll_set_duplex(hal->mac_regs, ETH_DUPLEX_FULL);
|
|
/* Select the checksum mode for received frame payload's TCP/UDP/ICMP headers */
|
|
emac_ll_checksum_offload_mode(hal->mac_regs, ETH_CHECKSUM_HW);
|
|
/* Enable MAC retry transmission when a colision occurs in half duplex mode */
|
|
emac_ll_retry_enable(hal->mac_regs, true);
|
|
/* MAC passes all incoming frames to host, without modifying them */
|
|
emac_ll_auto_pad_crc_strip_enable(hal->mac_regs, false);
|
|
/* Set Back-Off limit time before retry a transmittion after a collision */
|
|
emac_ll_set_back_off_limit(hal->mac_regs, EMAC_LL_BACKOFF_LIMIT_10);
|
|
/* Disable deferral check, MAC defers until the CRS signal goes inactive */
|
|
emac_ll_deferral_check_enable(hal->mac_regs, false);
|
|
/* Set preamble length 7 Bytes */
|
|
emac_ll_set_preamble_length(hal->mac_regs, EMAC_LL_PREAMBLE_LENGTH_7);
|
|
|
|
/* MACFFR Configuration */
|
|
/* Receiver module passes only those frames to the Application that pass the SA or DA address filter */
|
|
emac_ll_receive_all_enable(hal->mac_regs, false);
|
|
/* Disable source address filter */
|
|
emac_ll_set_src_addr_filter(hal->mac_regs, EMAC_LL_SOURCE_ADDR_FILTER_DISABLE);
|
|
emac_ll_sa_inverse_filter_enable(hal->mac_regs, false);
|
|
/* MAC blocks all control frames */
|
|
emac_ll_set_pass_ctrl_frame_mode(hal->mac_regs, EMAC_LL_CONTROL_FRAME_BLOCKALL);
|
|
/* AFM module passes all received broadcast frames and multicast frames */
|
|
emac_ll_broadcast_frame_enable(hal->mac_regs, true);
|
|
emac_ll_pass_all_multicast_enable(hal->mac_regs, true);
|
|
/* Address Check block operates in normal filtering mode for the DA address */
|
|
emac_ll_da_inverse_filter_enable(hal->mac_regs, false);
|
|
/* Disable Promiscuous Mode */
|
|
emac_ll_promiscuous_mode_enable(hal->mac_regs, false);
|
|
}
|
|
|
|
void emac_hal_enable_flow_ctrl(emac_hal_context_t *hal, bool enable)
|
|
{
|
|
/* MACFCR Configuration */
|
|
if (enable) {
|
|
/* Pause time */
|
|
emac_ll_set_pause_time(hal->mac_regs, EMAC_LL_PAUSE_TIME);
|
|
/* Enable generation of Zero-Quanta Pause Control frames */
|
|
emac_ll_zero_quanta_pause_enable(hal->mac_regs, true);
|
|
/* Threshold of the PAUSE to be checked for automatic retransmission of PAUSE Frame */
|
|
emac_ll_set_pause_low_threshold(hal->mac_regs, EMAC_LL_PAUSE_LOW_THRESHOLD_MINUS_28);
|
|
/* Don't allow MAC detect Pause frames with MAC address0 unicast address and unique multicast address */
|
|
emac_ll_unicast_pause_frame_detect_enable(hal->mac_regs, false);
|
|
/* Enable MAC to decode the received Pause frame and disable its transmitter for a specific time */
|
|
emac_ll_receive_flow_ctrl_enable(hal->mac_regs, true);
|
|
/* Enable MAC to transmit Pause frames in full duplex mode or the MAC back-pressure operation in half duplex mode */
|
|
emac_ll_transmit_flow_ctrl_enable(hal->mac_regs, true);
|
|
} else {
|
|
emac_ll_clear(hal->mac_regs);
|
|
}
|
|
}
|
|
|
|
void emac_hal_init_dma_default(emac_hal_context_t *hal, emac_hal_dma_config_t *hal_config)
|
|
{
|
|
/* DMAOMR Configuration */
|
|
/* Enable Dropping of TCP/IP Checksum Error Frames */
|
|
emac_ll_drop_tcp_err_frame_enable(hal->dma_regs, true);
|
|
#if CONFIG_IDF_TARGET_ESP32P4
|
|
/* Disable Receive Store Forward (Rx FIFO is only 256B) */
|
|
emac_ll_recv_store_forward_enable(hal->dma_regs, false);
|
|
#else
|
|
/* Enable Receive Store Forward */
|
|
emac_ll_recv_store_forward_enable(hal->dma_regs, true);
|
|
#endif
|
|
/* Enable Flushing of Received Frames because of the unavailability of receive descriptors or buffers */
|
|
emac_ll_flush_recv_frame_enable(hal->dma_regs, true);
|
|
/* Disable Transmit Store Forward */
|
|
emac_ll_trans_store_forward_enable(hal->dma_regs, false);
|
|
/* Flush Transmit FIFO */
|
|
emac_hal_flush_trans_fifo(hal);
|
|
/* Transmit Threshold Control */
|
|
emac_ll_set_transmit_threshold(hal->dma_regs, EMAC_LL_TRANSMIT_THRESHOLD_CONTROL_64);
|
|
/* Disable Forward Error Frame */
|
|
emac_ll_forward_err_frame_enable(hal->dma_regs, false);
|
|
/* Disable forward undersized good frame */
|
|
emac_ll_forward_undersized_good_frame_enable(hal->dma_regs, false);
|
|
/* Receive Threshold Control */
|
|
emac_ll_set_recv_threshold(hal->dma_regs, EMAC_LL_RECEIVE_THRESHOLD_CONTROL_64);
|
|
/* Allow the DMA to process a second frame of Transmit data even before obtaining the status for the first frame */
|
|
emac_ll_opt_second_frame_enable(hal->dma_regs, true);
|
|
|
|
/* DMABMR Configuration */
|
|
/* Enable Mixed Burst */
|
|
emac_ll_mixed_burst_enable(hal->dma_regs, true);
|
|
/* Enable Address Aligned Beates */
|
|
emac_ll_addr_align_enable(hal->dma_regs, true);
|
|
/* Don't use Separate PBL */
|
|
emac_ll_use_separate_pbl_enable(hal->dma_regs, false);
|
|
/* Set Rx/Tx DMA Burst Length */
|
|
emac_ll_set_prog_burst_len(hal->dma_regs, hal_config->dma_burst_len);
|
|
/* Enable Enhanced Descriptor,8 Words(32 Bytes) */
|
|
emac_ll_enhance_desc_enable(hal->dma_regs, true);
|
|
/* Specifies the number of word to skip between two unchained descriptors (Ring mode) */
|
|
emac_ll_set_desc_skip_len(hal->dma_regs, 0);
|
|
/* DMA Arbitration Scheme */
|
|
emac_ll_fixed_arbitration_enable(hal->dma_regs, false);
|
|
/* Set priority ratio in the weighted round-robin arbitration between Rx DMA and Tx DMA */
|
|
emac_ll_set_priority_ratio(hal->dma_regs, EMAC_LL_DMA_ARBITRATION_ROUNDROBIN_RXTX_1_1);
|
|
}
|
|
|
|
void emac_hal_set_phy_cmd(emac_hal_context_t *hal, uint32_t phy_addr, uint32_t phy_reg, bool write)
|
|
{
|
|
/* Write the result value into the MII Address register */
|
|
emac_ll_set_phy_addr(hal->mac_regs, phy_addr);
|
|
/* Set the PHY register address */
|
|
emac_ll_set_phy_reg(hal->mac_regs, phy_reg);
|
|
/* Set as write mode */
|
|
emac_ll_write_enable(hal->mac_regs, write);
|
|
/* Set MII busy bit */
|
|
emac_ll_set_busy(hal->mac_regs, true);
|
|
|
|
}
|
|
|
|
void emac_hal_set_address(emac_hal_context_t *hal, uint8_t *mac_addr)
|
|
{
|
|
/* Make sure mac address is unicast type */
|
|
if (!(mac_addr[0] & 0x01)) {
|
|
emac_ll_set_addr(hal->mac_regs, mac_addr);
|
|
}
|
|
}
|
|
|
|
void emac_hal_start(emac_hal_context_t *hal)
|
|
{
|
|
/* Enable Ethernet MAC and DMA Interrupt */
|
|
emac_ll_enable_corresponding_intr(hal->dma_regs, EMAC_LL_CONFIG_ENABLE_INTR_MASK);
|
|
/* Clear all pending interrupts */
|
|
emac_ll_clear_all_pending_intr(hal->dma_regs);
|
|
|
|
/* Enable transmit state machine of the MAC for transmission on the MII */
|
|
emac_ll_transmit_enable(hal->mac_regs, true);
|
|
/* Start DMA transmission */
|
|
/* Note that the EMAC Databook states the DMA could be started prior enabling
|
|
the MAC transmitter. However, it turned out that such order may cause the MAC
|
|
transmitter hangs */
|
|
emac_ll_start_stop_dma_transmit(hal->dma_regs, true);
|
|
|
|
/* Start DMA reception */
|
|
emac_ll_start_stop_dma_receive(hal->dma_regs, true);
|
|
/* Enable receive state machine of the MAC for reception from the MII */
|
|
emac_ll_receive_enable(hal->mac_regs, true);
|
|
}
|
|
|
|
esp_err_t emac_hal_stop(emac_hal_context_t *hal)
|
|
{
|
|
/* Stop DMA transmission */
|
|
emac_ll_start_stop_dma_transmit(hal->dma_regs, false);
|
|
|
|
if (emac_ll_transmit_frame_ctrl_status(hal->mac_regs) != 0x0) {
|
|
/* Previous transmit in progress */
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
|
|
/* Disable transmit state machine of the MAC for transmission on the MII */
|
|
emac_ll_receive_enable(hal->mac_regs, false);
|
|
/* Disable receive state machine of the MAC for reception from the MII */
|
|
emac_ll_transmit_enable(hal->mac_regs, false);
|
|
|
|
if (emac_ll_receive_read_ctrl_state(hal->mac_regs) != 0x0) {
|
|
/* Previous receive copy in progress */
|
|
return ESP_ERR_INVALID_STATE;
|
|
}
|
|
|
|
/* Stop DMA reception */
|
|
emac_ll_start_stop_dma_receive(hal->dma_regs, false);
|
|
|
|
/* Flush Transmit FIFO */
|
|
emac_hal_flush_trans_fifo(hal);
|
|
|
|
/* Disable Ethernet MAC and DMA Interrupt */
|
|
emac_ll_disable_all_intr(hal->dma_regs);
|
|
|
|
return ESP_OK;
|
|
}
|