Historia

Shu Chen 50b6b674cf openthread: simplify ot_cli example configuration Use single ESP_EXTENSION_IN_OPENTHREAD_CLI config option to enable/disable extended features. It will be pure ot_cli example if it's disabled.		2021-07-19 19:37:49 +08:00
..
main	openthread: simplify ot_cli example configuration	2021-07-19 19:37:49 +08:00
CMakeLists.txt	openthread: add ot tcp and udp socket example	2021-06-07 21:50:19 +08:00
Makefile	openthread: simplify ot_cli example configuration	2021-07-19 19:37:49 +08:00
README.md	openthread: add ot tcp and udp socket example	2021-06-07 21:50:19 +08:00
partitions.csv	OpenThread: add OpenThread and porting	2021-04-02 14:49:49 +08:00
sdkconfig.defaults	openthread: enable lwip multicast ping in examples	2021-07-15 17:28:28 +08:00
sdkconfig.defaults.esp32h2	openthread: enable ot_cli on esp32h2	2021-07-14 19:15:24 +08:00

README.md

OpenThread command line example

Overview

This example demonstrates a basic OpenThread command line.

How to use example

Hardware connection

To run this example, it's used to use an DevKit C board and connect PIN4 and PIN5 to the UART TX and RX port of another 15.4 capable radio co-processor (RCP)

Configure the project

idf.py menuconfig

The example can run with the default configuration.

Build, Flash, and Run

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT build flash monitor

Now you'll get an interactive OpenThread command line shell.

Example Output

I (1540) OPENTHREAD: [INFO]-PLAT----: RCP reset: RESET_POWER_ON
I (1610) OPENTHREAD: [NOTE]-PLAT----: RCP API Version: 3
I (1840) OPENTHREAD: [INFO]-CORE----: Non-volatile: Read NetworkInfo {rloc:0x7404, extaddr:aee4a5cc7ed1ad88, role:Child, mode:0x0f, version:2, keyseq:0x0, ...
I (1850) OPENTHREAD: [INFO]-CORE----: Non-volatile: ... pid:0x1161bcdc, mlecntr:0x5a17, maccntr:0x5a91, mliid:33158c466ab576d4}
I (1900) OPENTHREAD: [INFO]-CORE----: Non-volatile: Read ParentInfo {extaddr:36505631b12ea5e3, version:2}
I (1900) OPENTHREAD: [INFO]-CORE----: Notifier: StateChanged (0x1007c300) [KeySeqCntr NetData Channel PanId NetName ExtPanId MstrKey ActDset] 

> ifconfig up
I (11320) OPENTHREAD: [INFO]-CLI-----: execute command: ifconfig up
Done
I (11340) OPENTHREAD: [INFO]-CORE----: Notifier: StateChanged (0x01001009) [Ip6+ LLAddr Ip6Mult+ NetifState] 
> dataset init new
I (105650) OPENTHREAD: [INFO]-CLI-----: execute command: dataset init new
Done

> dataset
I (107460) OPENTHREAD: [INFO]-CLI-----: execute command: dataset
Active Timestamp: 1
Channel: 14
Channel Mask: 0x07fff800
Ext PAN ID: d9d69bf6535735ec
Mesh Local Prefix: fd73:192f:f27:2a5c::/64
Master Key: 7ad0ec87abbd8c41f07d004922b480bf
Network Name: OpenThread-a5fe
PAN ID: 0xa5fe
PSKc: ef028c933febdeb226f6681cc780272a
Security Policy: 672, onrcb
Done

> dataset commit active
I (134350) OPENTHREAD: [INFO]-CLI-----: execute command: dataset commit active
I (134350) OPENTHREAD: [INFO]-MESH-CP-: Active dataset set
Done
I (134380) OPENTHREAD: [INFO]-CORE----: Notifier: StateChanged (0x101fc110) [MLAddr KeySeqCntr Channel PanId NetName ExtPanId MstrKey PSKc SecPolicy ...
I (134390) OPENTHREAD: [INFO]-CORE----: Notifier: StateChanged (0x101fc110) ... ActDset] 

>thread start                                                         
I (177250) OPENTHREAD: [INFO]-CLI-----: execute command: thread start
I (177250) OPENTHREAD: [NOTE]-MLE-----: Role Disabled -> Detached
I (177280) OPENTHREAD: [INFO]-CORE----: Non-volatile: Read NetworkInfo {rloc:0x7404, extaddr:aee4a5cc7ed1ad88, role:Child, mode:0x0f, version:2, keyseq:0x0, ...
I (177290) OPENTHREAD: [INFO]-CORE----: Non-volatile: ... pid:0x1161bcdc, mlecntr:0x5a17, maccntr:0x5a91, mliid:33158c466ab576d4}            
I (194054) OPENTHREAD: [INFO]-CORE----: Non-volatile: Saved NetworkInfo {rloc:0x7404, extaddr:aee4a5cc7ed1ad88, role:Child, mode:0x0f, version:2, keyseq:0x0, ...
I (194064) OPENTHREAD: [INFO]-CORE----: Non-volatile: ... pid:0x1161bcdc, mlecntr:0x5e00, maccntr:0x5e79, mliid:33158c466ab576d4}            
I (194074) OPENTHREAD: [INFO]-MLE-----: Send Child Update Request to parent (fe80:0:0:0:3450:5631:b12e:a5e3)                                 
Done                                                                  

# After some seconds

> state
leader
Done

Example1: TCP/UDP server and client

Step 1 Configure the project

idf.py menuconfig

Enable the operation: Example Configuration -> Enable custom command in ot-cli -> Enable openthread tcp/udp socket

Step 2 Build, Flash, and Run

You need to prepare two ESP devices each connected to a 15.4 RCP and flashed with this example.

idf.py -p PORT flash monitor

Step 3 Set up network

On the first device, run:

> extaddr 166e0a0000000001
Done
> dataset channel 17
Done
> dataset panid 0xface
Done
> dataset extpanid 000db80000000000
Done
> dataset networkname GRL
Done
> dataset masterkey 00112233445566778899aabbccddeeff
Done
> dataset meshlocalprefix FD00:0DB8:0000:0000::
Done
> dataset pskc 00000000000000000000000000000000
Done
> dataset activetimestamp 1
Done
> dataset commit active
Done
> ifconfig up
Done
> thread start
Done

 # After some seconds

> state
leader
Done

Now the first device has formed a Thread network, on the second device run:

> extaddr 166e0a0000000002
Done
> dataset channel 17
Done
> dataset panid 0xface
Done
> dataset extpanid 000db80000000000
Done
> dataset networkname GRL
Done
> dataset masterkey 00112233445566778899aabbccddeeff
Done
> dataset meshlocalprefix FD00:0DB8:0000:0000::
Done
> dataset pskc 00000000000000000000000000000000
Done
> dataset activetimestamp 1
Done
> dataset commit active
Done
> ifconfig up
Done
> thread start
Done

 # After some seconds

> state
router  # child is also a valid state
Done

Now the second device has joined the Thread network and acting as a router (or a child).

Step 4 Set up tcp/udp socket server and client

In leader device, run this command in command line shell.

# for setup a tcp server
> tcpsockserver

# for setup an udp server
> udpsockserver

Then run this command to get the leader IPv6 address.

> ipaddr
fd00:db8:0:0:0:ff:fe00:fc00
fd00:db8:0:0:0:ff:fe00:ac00
fd00:db8:0:0:284a:cb4a:cb3b:2a42
fe80:0:0:0:146e:a00:0:1

In router device, run this command to set up a socket client in command line shell.

# for setup a tcp client
> tcpsockclient fd00:db8:0:0:284a:cb4a:cb3b:2a42

# for setup an udp client
> udpsockclient fd00:db8:0:0:284a:cb4a:cb3b:2a42

You will get

# in leader device

> tcpsockserver
I(173437) OPENTHREAD:[INFO]-CLI-----: execute command: tcpsockserver
> I (173437) ot_secket: Socket created
I (173437) ot_secket: Socket bound, port 12345
I (173457) ot_secket: Socket listening, timeout is 30 seconds
I(175007) OPENTHREAD:[INFO]-MLE-----: Send Advertisement (ff02:0:0:0:0:0:0:1)

......

I (182187) ot_secket: Received 28 bytes from client:
I (182187) ot_secket: This message is from client
I (182187) ot_secket: Socket accepted ip address: FD00:DB8::498:DDB:EC7:49DC
I (182189) ot_secket: Socket server is closed.

# in router device

> tcpsockclient fd00:db8:0:0:284a:cb4a:cb3b:2a42
I(37731) OPENTHREAD:[INFO]-CLI-----: execute command: tcpsockclient fd00:db8:0:0:284a:cb4a:cb3b:2a42
> I (37741) ot_secket: Socket created, connecting to b80d00fd:0:4acb4a28:422a3bcb:12345
I(37751) OPENTHREAD:[INFO]-ARP-----: Sending address query for fd00:db8:0:0:284a:cb4a:cb3b:2a42

......

I (38171) ot_secket: Successfully connected

......

I (38321) ot_secket: Received 28 bytes from fd00:db8:0:0:284a:cb4a:cb3b:2a42
I (38321) ot_secket: This message is from server
I (38323) ot_secket: Socket client is closed.