kopia lustrzana https://github.com/espressif/esp-idf
75 wiersze
6.2 KiB
ReStructuredText
75 wiersze
6.2 KiB
ReStructuredText
Digital Signature (DS)
|
|
======================
|
|
|
|
:link_to_translation:`zh_CN:[中文]`
|
|
|
|
The Digital Signature (DS) module provides hardware acceleration of signing messages based on RSA. It uses pre-encrypted parameters to calculate a signature. The parameters are encrypted using HMAC as a key-derivation function. In turn, the HMAC uses eFuses as the input key. The whole process happens in hardware so that neither the decryption key for the RSA parameters nor the input key for the HMAC key derivation function can be seen by the software while calculating the signature.
|
|
|
|
For more detailed information on the hardware involved in the signature calculation and the registers used, see **{IDF_TARGET_NAME} Technical Reference Manual** > **Digital Signature (DS)** [`PDF <{IDF_TARGET_TRM_EN_URL}#digsig>`__].
|
|
|
|
|
|
Private Key Parameters
|
|
----------------------
|
|
|
|
The private key parameters for the RSA signature are stored in flash. To prevent unauthorized access, they are AES-encrypted. The HMAC module is used as a key-derivation function to calculate the AES encryption key for the private key parameters. In turn, the HMAC module uses a key from the eFuses key block which can be read-protected to prevent unauthorized access as well.
|
|
|
|
Upon signature calculation invocation, the software only specifies which eFuse key to use, the corresponding eFuse key purpose, the location of the encrypted RSA parameters, and the message.
|
|
|
|
Key Generation
|
|
--------------
|
|
|
|
Both the HMAC key and the RSA private key have to be created and stored before the DS peripheral can be used. This needs to be done in software on the {IDF_TARGET_NAME} or alternatively on a host. For this context, ESP-IDF provides :cpp:func:`esp_efuse_write_block` to set the HMAC key and :cpp:func:`esp_hmac_calculate` to encrypt the private RSA key parameters.
|
|
|
|
You can find instructions on how to calculate and assemble the private key parameters in **{IDF_TARGET_NAME} Technical Reference Manual** > **Digital Signature (DS)** [`PDF <{IDF_TARGET_TRM_EN_URL}#digsig>`__].
|
|
|
|
Signature Calculation with ESP-IDF
|
|
----------------------------------
|
|
|
|
For more detailed information on the workflow and the registers used, see **{IDF_TARGET_NAME} Technical Reference Manual** > **Digital Signature (DS)** [`PDF <{IDF_TARGET_TRM_EN_URL}#digsig>`__].
|
|
|
|
Three parameters need to be prepared to calculate the digital signature:
|
|
|
|
#. The eFuse key block ID which is used as the key for the HMAC
|
|
#. The location of the encrypted private key parameters
|
|
#. The message to be signed
|
|
|
|
Since the signature calculation takes some time, there are two possible API versions to use in ESP-IDF. The first one is :cpp:func:`esp_ds_sign` and simply blocks until the calculation is finished. If software needs to do something else during the calculation, :cpp:func:`esp_ds_start_sign` can be called, followed by periodic calls to :cpp:func:`esp_ds_is_busy` to check when the calculation has finished. Once the calculation has finished, :cpp:func:`esp_ds_finish_sign` can be called to get the resulting signature.
|
|
|
|
The APIs :cpp:func:`esp_ds_sign` and :cpp:func:`esp_ds_start_sign` calculate a plain RSA signature with the help of the DS peripheral. This signature needs to be converted to an appropriate format for further use. For example, the MbedTLS SSL stack supports PKCS#1 format. The API :cpp:func:`esp_ds_rsa_sign` can be used to obtain the signature directly in the PKCS#1 v1.5 format. It internally uses :cpp:func:`esp_ds_start_sign` and converts the signature into PKCS#1 v1.5 format.
|
|
|
|
.. note::
|
|
|
|
This is only the basic DS building block, the message length is fixed. To create signatures of arbitrary messages, the input is normally a hash of the actual message, padded up to the required length. An API to do this is planned in the future.
|
|
|
|
.. _configure-the-ds-peripheral:
|
|
|
|
Configure the DS Peripheral for a TLS Connection
|
|
------------------------------------------------
|
|
|
|
The DS peripheral on {IDF_TARGET_NAME} chip must be configured before it can be used for a TLS connection. The configuration involves the following steps:
|
|
|
|
1) Randomly generate a 256-bit value called the ``Initialization Vector`` (IV).
|
|
2) Randomly generate a 256-bit value called the ``HMAC_KEY``.
|
|
3) Calculate the encrypted private key parameters from the client private key (RSA) and the parameters generated in the above steps.
|
|
4) Then burn the 256-bit ``HMAC_KEY`` on the eFuse, which can only be read by the DS peripheral.
|
|
|
|
For more details, see **{IDF_TARGET_NAME} Technical Reference Manual** > **Digital Signature (DS)** [`PDF <{IDF_TARGET_TRM_EN_URL}#digsig>`__].
|
|
|
|
To configure the DS peripheral for development purposes, you can use the `esp-secure-cert-tool <https://pypi.org/project/esp-secure-cert-tool>`_.
|
|
|
|
The encrypted private key parameters obtained after the DS peripheral configuration are then to be kept in flash. Furthermore, they are to be passed to the DS peripheral which makes use of those parameters for the Digital Signature operation. The application then needs to read the DS data from the flash, which has been done through the APIs provided by the `esp_secure_cert_mgr <https://github.com/espressif/esp_secure_cert_mgr>`_ component. Please refer to the `component/README <https://github.com/espressif/esp_secure_cert_mgr#readme>`_ for more details.
|
|
|
|
The process of initializing the DS peripheral and then performing the Digital Signature operation is done internally with the help of `ESP-TLS`. Please refer to :ref:`digital-signature-with-esp-tls` for more details.
|
|
|
|
As mentioned in the `ESP-TLS` documentation, the application only needs to provide the encrypted private key parameters to the esp_tls context (as `ds_data`), which internally performs all necessary operations for initializing the DS peripheral and then performing the DS operation.
|
|
|
|
Example for SSL Mutual Authentication Using DS
|
|
----------------------------------------------
|
|
|
|
The example :example:`protocols/mqtt/ssl_ds` shows how to use the DS peripheral for mutual authentication. The example uses `mqtt_client` (Implemented through `ESP-MQTT`) to connect to broker ``test.mosquitto.org`` using SSL transport with mutual authentication. The SSL part is internally performed with `ESP-TLS`. See :example_file:`protocols/mqtt/ssl_ds/README.md` for more details.
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
.. include-build-file:: inc/esp_ds.inc
|