esp-idf/examples/openthread/ot_rcp
Xu Si Yu 07ebc527d5 openthread:add openthread CI 2022-09-16 14:07:31 +08:00
..
main openthread: add a configuration for selecting RCP UART TX_RX 2022-08-22 17:55:47 +08:00
CMakeLists.txt tools: Increase the minimal supported CMake version to 3.16 2022-06-01 06:35:02 +00:00
README.md openthread: refine ot_rcp example documentation and APIs 2021-08-26 16:10:16 +08:00
partitions.csv fix review comments 2022-05-17 12:56:22 +08:00
sdkconfig.ci.rcp openthread:add openthread CI 2022-09-16 14:07:31 +08:00
sdkconfig.defaults build: move build_from_src options to env 2022-06-29 20:26:50 +08:00

README.md

Supported Targets ESP32-H2

OpenThread Radio Co-Processor (RCP) Example

This example demonstrates an OpenThread Radio Co-Processor.

OpenThread RCP doesn't function alone, it needs to work together with a Host and this example covers two common user scenarios:

How to use example

Hardware Required

To run this example, an ESP32-H2 board is required.

Configure the project

The default communication interface is port 0 of ESP32-H2 UART running at 115200 baud, change the configuration in esp_ot_config.h if you want to use another interface or need different communication parameters.

Build and Flash

Build the project and flash it to the board:

idf.py -p <PORT> build flash

Now you'll get an OpenThread RCP, you can try the following use cases:

Thread Border Router

Please refer to ot_br example for the setup steps.

Thread Sniffer

Please refer to Thread Sniffer for the detailed instructions.