esp-idf/components/xtensa/include/xtensa-debug-module.h

75 wiersze
4.4 KiB
C

#ifndef XTENSA_DEBUG_MODULE_H
#define XTENSA_DEBUG_MODULE_H
/*
ERI registers / OCD offsets and field definitions
*/
#define ERI_DEBUG_OFFSET 0x100000
#define ERI_TRAX_OFFSET (ERI_DEBUG_OFFSET+0)
#define ERI_PERFMON_OFFSET (ERI_DEBUG_OFFSET+0x1000)
#define ERI_OCDREG_OFFSET (ERI_DEBUG_OFFSET+0x2000)
#define ERI_MISCDBG_OFFSET (ERI_DEBUG_OFFSET+0x3000)
#define ERI_CORESIGHT_OFFSET (ERI_DEBUG_OFFSET+0x3F00)
#define ERI_TRAX_TRAXID (ERI_TRAX_OFFSET+0x00)
#define ERI_TRAX_TRAXCTRL (ERI_TRAX_OFFSET+0x04)
#define ERI_TRAX_TRAXSTAT (ERI_TRAX_OFFSET+0x08)
#define ERI_TRAX_TRAXDATA (ERI_TRAX_OFFSET+0x0C)
#define ERI_TRAX_TRAXADDR (ERI_TRAX_OFFSET+0x10)
#define ERI_TRAX_TRIGGERPC (ERI_TRAX_OFFSET+0x14)
#define ERI_TRAX_PCMATCHCTRL (ERI_TRAX_OFFSET+0x18)
#define ERI_TRAX_DELAYCNT (ERI_TRAX_OFFSET+0x1C)
#define ERI_TRAX_MEMADDRSTART (ERI_TRAX_OFFSET+0x20)
#define ERI_TRAX_MEMADDREND (ERI_TRAX_OFFSET+0x24)
#define TRAXCTRL_TREN (1<<0) //Trace enable. Tracing starts on 0->1
#define TRAXCTRL_TRSTP (1<<1) //Trace Stop. Make 1 to stop trace.
#define TRAXCTRL_PCMEN (1<<2) //PC match enable
#define TRAXCTRL_PTIEN (1<<4) //Processor-trigger enable
#define TRAXCTRL_CTIEN (1<<5) //Cross-trigger enable
#define TRAXCTRL_TMEN (1<<7) //Tracemem Enable. Always set.
#define TRAXCTRL_CNTU (1<<9) //Post-stop-trigger countdown units; selects when DelayCount-- happens.
//0 - every 32-bit word written to tracemem, 1 - every cpu instruction
#define TRAXCTRL_TSEN (1<<11) //Undocumented/deprecated?
#define TRAXCTRL_SMPER_SHIFT 12 //Send sync every 2^(9-smper) messages. 7=reserved, 0=no sync msg
#define TRAXCTRL_SMPER_MASK 0x7 //Synchronization message period
#define TRAXCTRL_PTOWT (1<<16) //Processor Trigger Out (OCD halt) enabled when stop triggered
#define TRAXCTRL_PTOWS (1<<17) //Processor Trigger Out (OCD halt) enabled when trace stop completes
#define TRAXCTRL_CTOWT (1<<20) //Cross-trigger Out enabled when stop triggered
#define TRAXCTRL_CTOWS (1<<21) //Cross-trigger Out enabled when trace stop completes
#define TRAXCTRL_ITCTO (1<<22) //Integration mode: cross-trigger output
#define TRAXCTRL_ITCTIA (1<<23) //Integration mode: cross-trigger ack
#define TRAXCTRL_ITATV (1<<24) //replaces ATID when in integration mode: ATVALID output
#define TRAXCTRL_ATID_MASK 0x7F //ARB source ID
#define TRAXCTRL_ATID_SHIFT 24
#define TRAXCTRL_ATEN (1<<31) //ATB interface enable
#define TRAXSTAT_TRACT (1<<0) //Trace active flag.
#define TRAXSTAT_TRIG (1<<1) //Trace stop trigger. Clears on TREN 1->0
#define TRAXSTAT_PCMTG (1<<2) //Stop trigger caused by PC match. Clears on TREN 1->0
#define TRAXSTAT_PJTR (1<<3) //JTAG transaction result. 1=err in preceding jtag transaction.
#define TRAXSTAT_PTITG (1<<4) //Stop trigger caused by Processor Trigger Input. Clears on TREN 1->0
#define TRAXSTAT_CTITG (1<<5) //Stop trigger caused by Cross-Trigger Input. Clears on TREN 1->0
#define TRAXSTAT_MEMSZ_SHIFT 8 //Traceram size inducator. Usable trace ram is 2^MEMSZ bytes.
#define TRAXSTAT_MEMSZ_MASK 0x1F
#define TRAXSTAT_PTO (1<<16) //Processor Trigger Output: current value
#define TRAXSTAT_CTO (1<<17) //Cross-Trigger Output: current value
#define TRAXSTAT_ITCTOA (1<<22) //Cross-Trigger Out Ack: current value
#define TRAXSTAT_ITCTI (1<<23) //Cross-Trigger Input: current value
#define TRAXSTAT_ITATR (1<<24) //ATREADY Input: current value
#define TRAXADDR_TADDR_SHIFT 0 //Trax memory address, in 32-bit words.
#define TRAXADDR_TADDR_MASK 0x1FFFFF //Actually is only as big as the trace buffer size max addr.
#define TRAXADDR_TWRAP_SHIFT 21 //Amount of times TADDR has overflown
#define TRAXADDR_TWRAP_MASK 0x3FF
#define TRAXADDR_TWSAT (1<<31) //1 if TWRAP has overflown, clear by disabling tren.
#define PCMATCHCTRL_PCML_SHIFT 0 //Amount of lower bits to ignore in pc trigger register
#define PCMATCHCTRL_PCML_MASK 0x1F
#define PCMATCHCTRL_PCMS (1<<31) //PC Match Sense, 0 - match when procs PC is in-range, 1 - match when
//out-of-range
#endif