kopia lustrzana https://github.com/espressif/esp-idf
149 wiersze
5.7 KiB
ReStructuredText
149 wiersze
5.7 KiB
ReStructuredText
|
|
USB Device Driver
|
|
=================
|
|
|
|
{IDF_TARGET_USB_DP_GPIO_NUM:default="20"}
|
|
{IDF_TARGET_USB_DM_GPIO_NUM:default="19"}
|
|
|
|
Overview
|
|
--------
|
|
|
|
The driver allows users to use {IDF_TARGET_NAME} chips to develop USB devices on top the TinyUSB stack. TinyUSB is integrating with ESP-IDF to provide USB features of the framework. Using this driver the chip works as a composite device supporting to represent several USB devices simultaneously. Currently, only the communications device class (CDC) type of the device with the ACM (Abstract Control Model) subclass is supported.
|
|
|
|
|
|
Features
|
|
--------
|
|
|
|
- Configuration of device and string USB descriptors
|
|
- USB Serial Device (CDC-ACM)
|
|
- Input and output through USB Serial Device
|
|
|
|
|
|
Hardware USB Connection
|
|
-----------------------
|
|
|
|
- Any board with the {IDF_TARGET_NAME} chip with USB connectors or with exposed USB's D+ and D- (DATA+/DATA-) pins.
|
|
|
|
If the board has no USB connector but has the pins, connect pins directly to the host (e.g. with do-it-yourself cable from any USB connection cable).
|
|
|
|
On {IDF_TARGET_NAME}, connect GPIO {IDF_TARGET_USB_DP_GPIO_NUM} and {IDF_TARGET_USB_DM_GPIO_NUM} to D+/D- respectively:
|
|
|
|
|
|
.. figure:: ../../../_static/usb-board-connection.png
|
|
:align: center
|
|
:alt: Connection of a board to a host ESP chip
|
|
:figclass: align-center
|
|
|
|
Driver Structure
|
|
----------------
|
|
|
|
As the basis is used the TinyUSB stack.
|
|
|
|
On top of it the driver implements:
|
|
|
|
- Customization of USB descriptors
|
|
- Serial device support
|
|
- Redirecting of standard streams through the Serial device
|
|
- Encapsulated driver's task servicing the TinyUSB
|
|
|
|
|
|
|
|
Configuration
|
|
-------------
|
|
|
|
Via Menuconfig options you can specify:
|
|
|
|
- Several of descriptor's parameters (see: Descriptors Configuration bellow)
|
|
- USB Serial low-level Configuration
|
|
- The verbosity of the TinyUSB's log
|
|
- Disable the TinyUSB main task (for the custom implementation)
|
|
|
|
|
|
Descriptors Configuration
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The driver's descriptors are provided by the :cpp:type:`tinyusb_config_t` structure's :cpp:member:`descriptor` and :cpp:member:`string_descriptor` members. Therefore, users should initialize :cpp:type:`tinyusb_config_t` to their desired descriptor before calling :cpp:func:`tinyusb_driver_install` to install driver.
|
|
|
|
However, the driver also provides a default descriptor. The driver can be installed with the default descriptor by setting the :cpp:member:`descriptor` and :cpp:member:`string_descriptor` members of :cpp:type:`tinyusb_config_t` to `NULL` before calling :cpp:func:`tinyusb_driver_install`. The driver's default descriptor is specified using Menuconfig, where the following fields should be configured:
|
|
|
|
- PID
|
|
- VID
|
|
- bcdDevice
|
|
- Manufacturer
|
|
- Product name
|
|
- Name of CDC device if it is On
|
|
- Serial number
|
|
|
|
If you want to use own descriptors with extended modification, you can define them during the driver installation process
|
|
|
|
|
|
Install Driver
|
|
--------------
|
|
To initialize the driver, users should call :cpp:func:`tinyusb_driver_install`. The driver's configuration is specified in a :cpp:type:`tinyusb_config_t` structure that is passed as an argument to :cpp:func:`tinyusb_driver_install`.
|
|
|
|
Note that the :cpp:type:`tinyusb_config_t` structure can be zero initialized (e.g. ``tinyusb_config_t tusb_cfg = { 0 }``) or partially (as shown below). For any member that is initialized to `0` or `NULL`, the driver will use its default configuration values for that member (see example below)
|
|
|
|
.. code-block:: c
|
|
|
|
tinyusb_config_t partial_init = {
|
|
.descriptor = NULL; //Uses default descriptor specified in Menuconfig
|
|
.string_descriptor = NULL; //Uses default string specified in Menuconfig
|
|
.external_phy = false;
|
|
}
|
|
|
|
USB Serial Device (CDC-ACM)
|
|
---------------------------
|
|
|
|
If the CDC option is enabled in Menuconfig, the USB Serial Device could be initialized with :cpp:func:`tusb_cdc_acm_init` according to the settings from :cpp:type:`tinyusb_config_cdcacm_t` (see example below).
|
|
|
|
.. code-block:: c
|
|
|
|
tinyusb_config_cdcacm_t amc_cfg = {
|
|
.usb_dev = TINYUSB_USBDEV_0,
|
|
.cdc_port = TINYUSB_CDC_ACM_0,
|
|
.rx_unread_buf_sz = 64,
|
|
.callback_rx = NULL,
|
|
.callback_rx_wanted_char = NULL,
|
|
.callback_line_state_changed = NULL,
|
|
.callback_line_coding_changed = NULL
|
|
};
|
|
tusb_cdc_acm_init(&amc_cfg);
|
|
|
|
To specify callbacks you can either set the pointer to your :cpp:type:`tusb_cdcacm_callback_t` function in the configuration structure or call :cpp:func:`tinyusb_cdcacm_register_callback` after initialization.
|
|
|
|
USB Serial Console
|
|
^^^^^^^^^^^^^^^^^^
|
|
|
|
The driver allows to redirect all standard application strings (stdin/out/err) to the USB Serial Device and return them to UART using :cpp:func:`esp_tusb_init_console`/:cpp:func:`esp_tusb_deinit_console` functions.
|
|
|
|
|
|
Application Examples
|
|
--------------------
|
|
|
|
The table below describes the code examples available in the directory :example:`peripherals/usb/`.
|
|
|
|
.. list-table::
|
|
:widths: 35 65
|
|
:header-rows: 1
|
|
|
|
* - Code Example
|
|
- Description
|
|
* - :example:`peripherals/usb/device/tusb_console`
|
|
- How to set up {IDF_TARGET_NAME} chip to get log output via Serial Device connection
|
|
* - :example:`peripherals/usb/device/tusb_sample_descriptor`
|
|
- How to set up {IDF_TARGET_NAME} chip to work as a Generic USB Device with a user-defined descriptor
|
|
* - :example:`peripherals/usb/device/tusb_serial_device`
|
|
- How to set up {IDF_TARGET_NAME} chip to work as a USB Serial Device
|
|
|
|
|
|
API Reference
|
|
-------------
|
|
|
|
.. include-build-file:: inc/tinyusb.inc
|
|
.. include-build-file:: inc/tinyusb_types.inc
|
|
.. include-build-file:: inc/tusb_cdc_acm.inc
|
|
.. include-build-file:: inc/tusb_console.inc
|
|
.. include-build-file:: inc/tusb_tasks.inc
|
|
.. include-build-file:: inc/vfs_tinyusb.inc
|
|
|