kopia lustrzana https://github.com/espressif/esp-idf
428 wiersze
17 KiB
ReStructuredText
428 wiersze
17 KiB
ReStructuredText
{IDF_TARGET_CORE_NUM:default="2", esp32s2="1", esp32c3="1", esp32c2="1"}
|
|
|
|
{IDF_TARGET_FEATURES:default="[NEEDS TO BE UPDATED]", esp32="WiFi/BT/BLE, silicon revision 1, 2MB external flash", esp32s2="WiFi, silicon revision 0, 2MB external flash", esp32s3="This is esp32s3 chip with 2 CPU core(s), WiFi/BLE, silicon revision 0, 2MB external flash", esp32c2="WiFi/BLE, silicon revision 0, 2MB external flash", esp32c3="WiFi/BLE, silicon revision 0, 2MB external flash"}
|
|
|
|
{IDF_TARGET_HEAP_SIZE:default="[NEEDS TO BE UPDATED]", esp32="298968", esp32s2="253900", esp32s3="390684", esp32c2="203888", esp32c3="337332"}
|
|
|
|
Build the Project
|
|
=================
|
|
|
|
Build the project by running:
|
|
|
|
.. code-block:: batch
|
|
|
|
idf.py build
|
|
|
|
This command will compile the application and all ESP-IDF components, then it will generate the bootloader, partition table, and application binaries.
|
|
|
|
.. code-block:: none
|
|
|
|
$ idf.py build
|
|
Running cmake in directory /path/to/hello_world/build
|
|
Executing "cmake -G Ninja --warn-uninitialized /path/to/hello_world"...
|
|
Warn about uninitialized values.
|
|
-- Found Git: /usr/bin/git (found version "2.17.0")
|
|
-- Building empty aws_iot component due to configuration
|
|
-- Component names: ...
|
|
-- Component paths: ...
|
|
|
|
... (more lines of build system output)
|
|
|
|
[527/527] Generating hello_world.bin
|
|
esptool.py v2.3.1
|
|
|
|
Project build complete. To flash, run this command:
|
|
../../../components/esptool_py/esptool/esptool.py -p (PORT) -b 921600 write_flash --flash_mode dio --flash_size detect --flash_freq 40m 0x10000 build/hello_world.bin build 0x1000 build/bootloader/bootloader.bin 0x8000 build/partition_table/partition-table.bin
|
|
or run 'idf.py -p PORT flash'
|
|
|
|
If there are no errors, the build will finish by generating the firmware binary .bin files.
|
|
|
|
|
|
Flash onto the Device
|
|
=====================
|
|
|
|
To flash the binaries that you just built for the {IDF_TARGET_NAME} in the previous step, you need to run the following command:
|
|
|
|
.. code-block:: bash
|
|
|
|
idf.py -p PORT flash
|
|
|
|
Replace ``PORT`` with your {IDF_TARGET_NAME} board's USB port name. If the ``PORT`` is not defined, the :ref:`idf.py` will try to connect automatically using the available USB ports.
|
|
|
|
For more information on ``idf.py`` arguments, see :ref:`idf.py`.
|
|
|
|
.. note::
|
|
|
|
The option ``flash`` automatically builds and flashes the project, so running ``idf.py build`` is not necessary.
|
|
|
|
Encountered Issues While Flashing? See this :doc:`flashing-troubleshooting` page or :doc:`establish-serial-connection` for more detailed information.
|
|
|
|
Normal Operation
|
|
~~~~~~~~~~~~~~~~
|
|
|
|
When flashing, you will see the output log similar to the following:
|
|
|
|
.. only:: esp32
|
|
|
|
.. code-block:: none
|
|
|
|
...
|
|
esptool.py --chip esp32 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x1000 bootloader/bootloader.bin 0x10000 hello_world.bin
|
|
esptool.py v3.0-dev
|
|
Serial port /dev/ttyUSB0
|
|
Connecting........_
|
|
Chip is ESP32D0WDQ6 (revision 0)
|
|
Features: WiFi, BT, Dual Core, Coding Scheme None
|
|
Crystal is 40MHz
|
|
MAC: 24:0a:c4:05:b9:14
|
|
Uploading stub...
|
|
Running stub...
|
|
Stub running...
|
|
Changing baud rate to 460800
|
|
Changed.
|
|
Configuring flash size...
|
|
Compressed 3072 bytes to 103...
|
|
Writing at 0x00008000... (100 %)
|
|
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 5962.8 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 26096 bytes to 15408...
|
|
Writing at 0x00001000... (100 %)
|
|
Wrote 26096 bytes (15408 compressed) at 0x00001000 in 0.4 seconds (effective 546.7 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 147104 bytes to 77364...
|
|
Writing at 0x00010000... (20 %)
|
|
Writing at 0x00014000... (40 %)
|
|
Writing at 0x00018000... (60 %)
|
|
Writing at 0x0001c000... (80 %)
|
|
Writing at 0x00020000... (100 %)
|
|
Wrote 147104 bytes (77364 compressed) at 0x00010000 in 1.9 seconds (effective 615.5 kbit/s)...
|
|
Hash of data verified.
|
|
|
|
Leaving...
|
|
Hard resetting via RTS pin...
|
|
Done
|
|
|
|
.. only:: esp32s2
|
|
|
|
.. code-block:: none
|
|
|
|
...
|
|
esptool.py --chip esp32s2 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x1000 bootloader/bootloader.bin 0x10000 hello_world.bin
|
|
esptool.py v3.0-dev
|
|
Serial port /dev/ttyUSB0
|
|
Connecting....
|
|
Chip is ESP32-S2
|
|
Features: WiFi
|
|
Crystal is 40MHz
|
|
MAC: 18:fe:34:72:50:e3
|
|
Uploading stub...
|
|
Running stub...
|
|
Stub running...
|
|
Changing baud rate to 460800
|
|
Changed.
|
|
Configuring flash size...
|
|
Compressed 3072 bytes to 103...
|
|
Writing at 0x00008000... (100 %)
|
|
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 3851.6 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 22592 bytes to 13483...
|
|
Writing at 0x00001000... (100 %)
|
|
Wrote 22592 bytes (13483 compressed) at 0x00001000 in 0.3 seconds (effective 595.1 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 140048 bytes to 70298...
|
|
Writing at 0x00010000... (20 %)
|
|
Writing at 0x00014000... (40 %)
|
|
Writing at 0x00018000... (60 %)
|
|
Writing at 0x0001c000... (80 %)
|
|
Writing at 0x00020000... (100 %)
|
|
Wrote 140048 bytes (70298 compressed) at 0x00010000 in 1.7 seconds (effective 662.5 kbit/s)...
|
|
Hash of data verified.
|
|
|
|
Leaving...
|
|
Hard resetting via RTS pin...
|
|
Done
|
|
|
|
.. only:: esp32s3
|
|
|
|
.. code-block:: none
|
|
|
|
...
|
|
esptool.py esp32s3 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
|
|
esptool.py v3.2-dev
|
|
Serial port /dev/ttyUSB0
|
|
Connecting....
|
|
Chip is ESP32-S3
|
|
Features: WiFi, BLE
|
|
Crystal is 40MHz
|
|
MAC: 7c:df:a1:e0:00:64
|
|
Uploading stub...
|
|
Running stub...
|
|
Stub running...
|
|
Changing baud rate to 460800
|
|
Changed.
|
|
Configuring flash size...
|
|
Flash will be erased from 0x00000000 to 0x00004fff...
|
|
Flash will be erased from 0x00010000 to 0x00039fff...
|
|
Flash will be erased from 0x00008000 to 0x00008fff...
|
|
Compressed 18896 bytes to 11758...
|
|
Writing at 0x00000000... (100 %)
|
|
Wrote 18896 bytes (11758 compressed) at 0x00000000 in 0.5 seconds (effective 279.9 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 168208 bytes to 88178...
|
|
Writing at 0x00010000... (16 %)
|
|
Writing at 0x0001a80f... (33 %)
|
|
Writing at 0x000201f1... (50 %)
|
|
Writing at 0x00025dcf... (66 %)
|
|
Writing at 0x0002d0be... (83 %)
|
|
Writing at 0x00036c07... (100 %)
|
|
Wrote 168208 bytes (88178 compressed) at 0x00010000 in 2.4 seconds (effective 569.2 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 3072 bytes to 103...
|
|
Writing at 0x00008000... (100 %)
|
|
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 478.9 kbit/s)...
|
|
Hash of data verified.
|
|
|
|
Leaving...
|
|
Hard resetting via RTS pin...
|
|
Done
|
|
|
|
|
|
.. only:: esp32c2
|
|
|
|
.. code-block:: none
|
|
|
|
...
|
|
esptool.py esp32c2 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 60m --flash_size 2MB 0x0 bootloader/bootloader.bin 0x10000 hello_world.bin 0x8000 partition_table/partition-table.bin
|
|
esptool.py v3.3.1
|
|
Serial port /dev/ttyUSB0
|
|
Connecting....
|
|
Chip is ESP32-C2 (revision 1)
|
|
Features: Wi-Fi
|
|
Crystal is 40MHz
|
|
MAC: 10:97:bd:f0:e5:0c
|
|
Uploading stub...
|
|
Running stub...
|
|
Stub running...
|
|
Changing baud rate to 460800
|
|
Changed.
|
|
Configuring flash size...
|
|
Flash will be erased from 0x00000000 to 0x00004fff...
|
|
Flash will be erased from 0x00010000 to 0x0002ffff...
|
|
Flash will be erased from 0x00008000 to 0x00008fff...
|
|
Compressed 18192 bytes to 10989...
|
|
Writing at 0x00000000... (100 %)
|
|
Wrote 18192 bytes (10989 compressed) at 0x00000000 in 0.6 seconds (effective 248.5 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 128640 bytes to 65895...
|
|
Writing at 0x00010000... (20 %)
|
|
Writing at 0x00019539... (40 %)
|
|
Writing at 0x00020bf2... (60 %)
|
|
Writing at 0x00027de1... (80 %)
|
|
Writing at 0x0002f480... (100 %)
|
|
Wrote 128640 bytes (65895 compressed) at 0x00010000 in 1.7 seconds (effective 603.0 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 3072 bytes to 103...
|
|
Writing at 0x00008000... (100 %)
|
|
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.1 seconds (effective 360.1 kbit/s)...
|
|
Hash of data verified.
|
|
|
|
Leaving...
|
|
Hard resetting via RTS pin...
|
|
|
|
|
|
.. only:: esp32c3
|
|
|
|
.. code-block:: none
|
|
|
|
...
|
|
esptool.py --chip esp32c3 -p /dev/ttyUSB0 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 80m --flash_size 2MB 0x8000 partition_table/partition-table.bin 0x0 bootloader/bootloader.bin 0x10000 hello_world.bin
|
|
esptool.py v3.0
|
|
Serial port /dev/ttyUSB0
|
|
Connecting....
|
|
Chip is ESP32-C3
|
|
Features: Wi-Fi
|
|
Crystal is 40MHz
|
|
MAC: 7c:df:a1:40:02:a4
|
|
Uploading stub...
|
|
Running stub...
|
|
Stub running...
|
|
Changing baud rate to 460800
|
|
Changed.
|
|
Configuring flash size...
|
|
Compressed 3072 bytes to 103...
|
|
Writing at 0x00008000... (100 %)
|
|
Wrote 3072 bytes (103 compressed) at 0x00008000 in 0.0 seconds (effective 4238.1 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 18960 bytes to 11311...
|
|
Writing at 0x00000000... (100 %)
|
|
Wrote 18960 bytes (11311 compressed) at 0x00000000 in 0.3 seconds (effective 584.9 kbit/s)...
|
|
Hash of data verified.
|
|
Compressed 145520 bytes to 71984...
|
|
Writing at 0x00010000... (20 %)
|
|
Writing at 0x00014000... (40 %)
|
|
Writing at 0x00018000... (60 %)
|
|
Writing at 0x0001c000... (80 %)
|
|
Writing at 0x00020000... (100 %)
|
|
Wrote 145520 bytes (71984 compressed) at 0x00010000 in 2.3 seconds (effective 504.4 kbit/s)...
|
|
Hash of data verified.
|
|
|
|
Leaving...
|
|
Hard resetting via RTS pin...
|
|
Done
|
|
|
|
|
|
If there are no issues by the end of the flash process, the board will reboot and start up the “hello_world” application.
|
|
|
|
If you'd like to use the Eclipse or VS Code IDE instead of running ``idf.py``, check out `Eclipse Plugin <https://github.com/espressif/idf-eclipse-plugin/blob/master/README.md>`_, `VSCode Extension <https://github.com/espressif/vscode-esp-idf-extension/blob/master/docs/tutorial/install.md>`_.
|
|
|
|
Monitor the Output
|
|
==================
|
|
|
|
To check if "hello_world" is indeed running, type ``idf.py -p PORT monitor`` (Do not forget to replace PORT with your serial port name).
|
|
|
|
This command launches the :doc:`IDF Monitor <../api-guides/tools/idf-monitor>` application::
|
|
|
|
$ idf.py -p <PORT> monitor
|
|
Running idf_monitor in directory [...]/esp/hello_world/build
|
|
Executing "python [...]/esp-idf/tools/idf_monitor.py -b 115200 [...]/esp/hello_world/build/hello_world.elf"...
|
|
--- idf_monitor on <PORT> 115200 ---
|
|
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
|
|
ets Jun 8 2016 00:22:57
|
|
|
|
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
|
|
ets Jun 8 2016 00:22:57
|
|
...
|
|
|
|
After startup and diagnostic logs scroll up, you should see "Hello world!" printed out by the application.
|
|
|
|
.. code-block:: none
|
|
|
|
...
|
|
Hello world!
|
|
Restarting in 10 seconds...
|
|
This is {IDF_TARGET_PATH_NAME} chip with {IDF_TARGET_CORE_NUM} CPU core(s), {IDF_TARGET_FEATURES}
|
|
Minimum free heap size: {IDF_TARGET_HEAP_SIZE} bytes
|
|
Restarting in 9 seconds...
|
|
Restarting in 8 seconds...
|
|
Restarting in 7 seconds...
|
|
|
|
To exit IDF monitor use the shortcut ``Ctrl+]``.
|
|
|
|
.. only:: esp32 or esp32c2
|
|
|
|
If IDF monitor fails shortly after the upload, or, if instead of the messages above, you see random garbage similar to what is given below, your board is likely using a 26 MHz crystal. Most development board designs use 40 MHz, so ESP-IDF uses this frequency as a default value.
|
|
|
|
.. figure:: ../../_static/get-started-garbled-output.png
|
|
:align: center
|
|
:alt: Garbled output
|
|
:figclass: align-center
|
|
|
|
If you have such a problem, do the following:
|
|
|
|
1. Exit the monitor.
|
|
2. Go back to ``menuconfig``.
|
|
3. Go to ``Component config`` --> ``Hardware Settings`` --> ``Main XTAL Config`` --> ``Main XTAL frequency``, then change :ref:`CONFIG_XTAL_FREQ_SEL` to 26 MHz.
|
|
4. After that, ``build and flash`` the application again.
|
|
|
|
In the current version of ESP-IDF, main XTAL frequencies supported by {IDF_TARGET_NAME} are as follows:
|
|
|
|
.. list::
|
|
|
|
:SOC_XTAL_SUPPORT_24M: - 24 MHz
|
|
:SOC_XTAL_SUPPORT_26M: - 26 MHz
|
|
:SOC_XTAL_SUPPORT_32M: - 32 MHz
|
|
:SOC_XTAL_SUPPORT_40M: - 40 MHz
|
|
|
|
.. note::
|
|
|
|
You can combine building, flashing and monitoring into one step by running::
|
|
|
|
idf.py -p PORT flash monitor
|
|
|
|
See also:
|
|
|
|
- :doc:`IDF Monitor <../api-guides/tools/idf-monitor>` for handy shortcuts and more details on using IDF monitor.
|
|
- :ref:`idf.py` for a full reference of ``idf.py`` commands and options.
|
|
|
|
**That's all that you need to get started with {IDF_TARGET_NAME}!**
|
|
|
|
Now you are ready to try some other :idf:`examples`, or go straight to developing your own applications.
|
|
|
|
.. important::
|
|
|
|
Some of examples do not support {IDF_TARGET_NAME} because required hardware is not included in {IDF_TARGET_NAME} so it cannot be supported.
|
|
|
|
If building an example, please check the README file for the ``Supported Targets`` table. If this is present including {IDF_TARGET_NAME} target, or the table does not exist at all, the example will work on {IDF_TARGET_NAME}.
|
|
|
|
|
|
Additional Tips
|
|
===============
|
|
|
|
Permission issues /dev/ttyUSB0
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
With some Linux distributions, you may get the ``Failed to open port /dev/ttyUSB0`` error message when flashing the {IDF_TARGET_NAME}. :ref:`This can be solved by adding the current user to the dialout group<linux-dialout-group>`.
|
|
|
|
Python compatibility
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
|
|
ESP-IDF supports Python 3.7 or newer. It is recommended to upgrade your operating system to a recent version satisfying this requirement. Other options include the installation of Python from `sources <https://www.python.org/downloads/>`_ or the use of a Python version management system such as `pyenv <https://github.com/pyenv/pyenv>`_.
|
|
|
|
.. only:: esp32 or esp32s2 or esp32s3
|
|
|
|
..
|
|
When adding new targets to the line above, please update this list in windows-start-project.rst and linux-macos-start-project.rst
|
|
|
|
|
|
Start with Board Support Package
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
To speed up prototyping on some development boards, you can use `Board Support Packages (BSPs) <https://github.com/espressif/esp-bsp>`_, which makes initialization of a particular board as easy as few function calls.
|
|
|
|
A BSP typically supports all of the hardware components provided on development board. Apart from the pinout definition and initialization functions, a BSP ships with drivers for the external components such as sensors, displays, audio codecs etc.
|
|
|
|
The BSPs are distributed via `IDF Component Manager <../api-guides/tools/idf-component-manager>`_, so they can be found in `IDF Component Registry <https://components.espressif.com>`_.
|
|
|
|
.. only:: esp32
|
|
|
|
**Here's an example of how to add ESP-WROVER-KIT BSP to your project:**
|
|
|
|
.. code-block:: bash
|
|
|
|
idf.py add-dependency esp_wrover_kit
|
|
|
|
.. only:: esp32s2
|
|
|
|
**Here's an example of how to add ESP32-S2-Kaluga-Kit BSP to your project:**
|
|
|
|
.. code-block:: bash
|
|
|
|
idf.py add-dependency esp32_s2_kaluga_kit
|
|
|
|
.. only:: esp32s3
|
|
|
|
**Here's an example of how to add ESP-BOX BSP to your project:**
|
|
|
|
.. code-block:: bash
|
|
|
|
idf.py add-dependency esp-box
|
|
|
|
More examples of BSP usage can be found in `BSP examples folder <https://github.com/espressif/esp-bsp/tree/master/examples>`_.
|
|
|
|
Flash Erase
|
|
~~~~~~~~~~~
|
|
|
|
Erasing the flash is also possible. To erase the entire flash memory you can run the following command:
|
|
|
|
.. code-block:: bash
|
|
|
|
idf.py -p PORT erase-flash
|
|
|
|
For erasing the OTA data, if present, you can run this command:
|
|
|
|
.. code-block:: bash
|
|
|
|
idf.py -p PORT erase-otadata
|
|
|
|
The flash erase command can take a while to be done. Do not disconnect your device while the flash erasing is in progress.
|