esp-idf/examples/provisioning/legacy/softap_prov
..
main
CMakeLists.txt
Makefile
README.md
softap_prov_test.py

README.md

SoftAP + HTTPD based Provisioning Example (Legacy)

Note: It is recommended to use the new wifi_prov_mgr example which is based on the simpler wifi_provisioning APIs. Check this example only if you wish to use lower level provisioning and protocomm APIs and want more control over the handlers.

(See the README.md file in the upper level 'examples' directory for more information about examples.)

softap_prov example demonstrates the implementation and integration of various IDF components for building a provisioning application.

For this example Wi-Fi SoftAP is chosen as the mode of transport, over which the provisioning related communication is to take place, between the device (to be provisioned) and the client (owner of the device). The provisioning service is hosted by an HTTP server which accepts requests to specific URIs corresponding to the available provisioning endpoints (eg. for session establishment, for Wi-Fi credentials configuration, etc.).

In the provisioning process the device is configured as a Wi-Fi station with specified credentials. Once configured, the device will retain the Wi-Fi configuration, until a flash erase is performed.

Right after provisioning is complete, Wi-Fi SoftAP and the HTTP server are deactivated. Though, that is specific to this example, and the user can choose to keep SoftAP / HTTP server active in their own application.

softap_prov uses the following components :

  • wifi_provisioning : provides data structures and protocomm endpoint handlers for Wi-Fi configuration
  • protocomm : for protocol based communication and secure session establishment
  • protobuf : Google's protocol buffer library for serialization of protocomm data structures

This example can be used, as it is, for adding a provisioning service to any application intended for IoT.

How to use example

Hardware Required

Example should be able to run on any commonly available ESP32 development board.

Application Required

Provisioning applications are available for various platforms. See below

Platform : Android

For Android, a provisioning application along with source code is available on GitHub : esp-idf-provisioning-android

Platform : iOS

For iOS, a provisioning application along with source code is available on GitHub : esp-idf-provisioning-ios

Platform : Linux / Windows / macOS

To provision the device running this example, the esp_prov.py script needs to be run (found under $IDF_PATH/tools/esp_prov). This feature of esp_prov should work on all platforms, given the dependencies are satisfied.

Configure the project

idf.py menuconfig
  • Under Example Configuration set the following :
    • SoftAP SSID (Defaults to PROV_)
    • SoftAP Password (Defaults to PROV_PASS)
    • Security Version (default 1)
    • Proof of Possession (default "abcd1234")

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (1562) app: SoftAP started
I (1572) app_prov: SoftAP Provisioning started with SSID 'PROV_261FCC', Password 'PROV_PASS'

Make sure to connect the client computer to the SoftAP network, whose SSID and Password are displayed in the serial monitor log. On successful connection the monitor log will show :

I (519482) tcpip_adapter: softAP assign IP to station,IP is: 192.168.4.2

In a separate terminal run the esp_prov.py script under $IDP_PATH/tools/esp_prov directory (please replace myssid and mypassword with the credentials of the AP to which the device is supposed to connect to after provisioning). The SoftAP endpoint corresponds to the IP and port of the device on the SoftAP network, but this is usually same as the default value and may be left out. Assuming default example configuration, the script should be run as follows :

python esp_prov.py --transport softap --service_name "192.168.4.1:80" --sec_ver 1 --pop abcd1234 --ssid myssid --passphrase mypassword

Above command will perform the provisioning steps, and the monitor log should display something like this :

I (634572) app_prov_handler: WiFi Credentials Received :
    ssid     : myssid
    password : mypassword
.
.
.
I (634652) app_prov_handler: WiFi Credentials Applied
I (634652) app_prov: STA Start
.
.
.
I (688270) app_prov_handler: Connecting state
.
.
.
I (637732) app_prov: STA Got IP
I (637732) app: got ip:192.168.43.220
.
.
.
I (654562) app_prov_handler: Connected state

After sometime the provisioning app will exit, SoftAP will be turned off and HTTP server will be stopped

I (667732) app_prov: Stopping provisioning
I (668732) app_prov: Provisioning stopped
I (668742) app: SoftAP stopped

QR Code Scanning

Enabling CONFIG_EXAMPLE_PROV_SHOW_QR will display a QR code on the serial terminal, which can be scanned from the ESP Provisioning phone apps to start the Wi-Fi provisioning process.

The monitor log should display something like this :

I (1640) app_prov: SoftAP Provisioning started with SSID 'PROV_EA69FC', Password 'PROV_PASS'
I (1640) app: Scan this QR code from the provisioning application for Provisioning.
I (1650) QRCODE: Encoding below text with ECC LVL 0 & QR Code Version 10
I (1660) QRCODE: {"ver":"v1","name":"PROV_EA69FC","pop":"abcd1234","transport":"softap"}
                                      
  █▀▀▀▀▀█ ▄▀ ▄█ ▄█▄▄█▀▄  ██ █▀▀▀▀▀█   
  █ ███ █ ▀███▀  ██▀▀█  ▀█▀ █ ███ █   
  █ ▀▀▀ █ █▄ ▄ ▀███  ▄▄█▀ ▄ █ ▀▀▀ █   
  ▀▀▀▀▀▀▀ █▄▀ █ ▀ ▀▄█▄▀▄▀▄█ ▀▀▀▀▀▀▀   
  ▀▀▄▀▄▄▀█  █▄ ▀▄▀█▄█ ▄▄ ██▄█▀▀▄▀▀▄   
  ███ █▀▀ ▄▀▀  ▄█▄ ▀▀█▄█▀▄▄ ▄█    █   
  ▄▀▀ ▀▀▀█▀▄▄▄█▀▀  ██▄█▄▄█▄▀█ ▄▄ ▀█   
   ▄█▄█ ▀▀▄█  ██   ▄█  ██▀█▀  ▄█ █▄   
    ▄█▀█▀  █▄▀▀▄  █▀█▀██  ▄█▀ ▀▀▄ ▀   
   █▄▄█▄▀█▄▄▀▄▄▀█ ▀▄ ▄▀██ ▄ █▄▄▄ ▀█   
  ▀▄▀▄▀▀▀█  ▄ ▄▀▀▀█▄▀▀▀▀▀▄█ ▄▄ █ ▄▄   
  ▀█▄▀██▀▄▄ ▄▄▀▄ ▄▀▀▀▀█▄▀▄▀█  ▄▄ ▀▀   
  ▀ ▀ ▀ ▀▀█▄▀ ▀▀  ▀▀▀▄▀██ █▀▀▀█▀ ▄▄   
  █▀▀▀▀▀█ ▀▀██▀█▀ ▀█ ▄ █▀▀█ ▀ ██ ▀▄   
  █ ███ █ ▄█▀▄▄▄  █▀▀▀ ██ ▀████▀ ▄█   
  █ ▀▀▀ █ ▄▀▄▄   ▄▀█▀▄▄▄█ ▀  ▄▀█▀▀▀   
  ▀▀▀▀▀▀▀ ▀  ▀▀▀▀    ▀ ▀  ▀ ▀ ▀▀ ▀    
                                      

I (1870) app: If QR code is not visible, copy paste the below URL in a browser.
https://espressif.github.io/esp-jumpstart/qrcode.html?data={"ver":"v1","name":"PROV_EA69FC","pop":"abcd1234","transport":"softap"}

Troubleshooting

Provisioning failed

It is possible that the Wi-Fi credentials provided were incorrect, or the device was not able to establish connection to the network, in which the the esp_prov script will notify failure (with reason) and the provisioning app will continue running, allowing the user to retry the process. Serial monitor log will display the failure along with disconnect reason :

E (39291) app_prov: STA Disconnected
E (39291) app_prov: Disconnect reason : 201
I (39291) app_prov: STA AP Not found
I (42021) app_prov_handler: Disconnected state

Provisioning does not start

If the serial monitor log is different, as shown below :

I (539) app_prov: Found ssid myssid
I (539) app_prov: Found password mypassword
I (549) app: Starting WiFi station

It means the Wi-Fi credentials were already set by some other application flashed previously to your device. To erase these credentials either do full erase and then flash the example

make erase_flash
idf.py -p PORT flash monitor

Or, enable Reset Provisioning option under Example Configuration under menuconfig. But this will erase the saved Wi-Fi credentials every time the device boots, so this is not the preferred solution.