mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/components/freemodbus/port/portserial_m.c

290 wiersze
11 KiB
C
Czysty Wina Historia

/*
* SPDX-FileCopyrightText: 2013 Armink
*
* SPDX-License-Identifier: BSD-3-Clause
*
* SPDX-FileContributor: 2016-2021 Espressif Systems (Shanghai) CO LTD
*/
/*
* FreeModbus Libary: ESP32 Port
* Copyright (C) 2013 Armink <armink.ztl@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* IF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* File: $Id: portserial.c,v 1.60 2013/08/13 15:07:05 Armink add Master Functions $
*/
#include <string.h>
#include "driver/uart.h"
#include "soc/dport_access.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/queue.h"
#include "esp_log.h"
#include "sdkconfig.h"
/* ----------------------- Modbus includes ----------------------------------*/
#include "port.h"
#include "mbport.h"
#include "mb_m.h"
#include "mbrtu.h"
#include "mbconfig.h"
#include "port_serial_master.h"
/* ----------------------- Defines ------------------------------------------*/
/* ----------------------- Static variables ---------------------------------*/
static const CHAR *TAG = "MB_MASTER_SERIAL";
// A queue to handle UART event.
static QueueHandle_t xMbUartQueue;
static TaskHandle_t xMbTaskHandle;
// The UART hardware port number
static UCHAR ucUartNumber = UART_NUM_MAX - 1;
static BOOL bRxStateEnabled = FALSE; // Receiver enabled flag
static BOOL bTxStateEnabled = FALSE; // Transmitter enabled flag
void vMBMasterPortSerialEnable(BOOL bRxEnable, BOOL bTxEnable)
{
// This function can be called from xMBRTUTransmitFSM() of different task
if (bTxEnable) {
bTxStateEnabled = TRUE;
} else {
bTxStateEnabled = FALSE;
}
if (bRxEnable) {
bRxStateEnabled = TRUE;
vTaskResume(xMbTaskHandle); // Resume receiver task
} else {
vTaskSuspend(xMbTaskHandle); // Block receiver task
bRxStateEnabled = FALSE;
}
}
static USHORT usMBMasterPortSerialRxPoll(size_t xEventSize)
{
BOOL xReadStatus = TRUE;
USHORT usCnt = 0;
if (bRxStateEnabled) {
while(xReadStatus && (usCnt++ <= MB_SERIAL_BUF_SIZE)) {
// Call the Modbus stack callback function and let it fill the stack buffers.
xReadStatus = pxMBMasterFrameCBByteReceived(); // callback to receive FSM
}
// The buffer is transferred into Modbus stack and is not needed here any more
uart_flush_input(ucUartNumber);
ESP_LOGD(TAG, "Received data: %d(bytes in buffer)\n", (uint32_t)usCnt);
#if !CONFIG_FMB_TIMER_PORT_ENABLED
vMBMasterSetCurTimerMode(MB_TMODE_T35);
pxMBMasterPortCBTimerExpired();
#endif
} else {
ESP_LOGE(TAG, "%s: bRxState disabled but junk data (%d bytes) received. ", __func__, xEventSize);
}
return usCnt;
}
BOOL xMBMasterPortSerialTxPoll(void)
{
USHORT usCount = 0;
BOOL bNeedPoll = TRUE;
if( bTxStateEnabled ) {
// Continue while all response bytes put in buffer or out of buffer
while(bNeedPoll && (usCount++ < MB_SERIAL_BUF_SIZE)) {
// Calls the modbus stack callback function to let it fill the UART transmit buffer.
bNeedPoll = pxMBMasterFrameCBTransmitterEmpty( ); // callback to transmit FSM
}
ESP_LOGD(TAG, "MB_TX_buffer sent: (%d) bytes.", (uint16_t)(usCount - 1));
// Waits while UART sending the packet
esp_err_t xTxStatus = uart_wait_tx_done(ucUartNumber, MB_SERIAL_TX_TOUT_TICKS);
vMBMasterPortSerialEnable(TRUE, FALSE);
MB_PORT_CHECK((xTxStatus == ESP_OK), FALSE, "mb serial sent buffer failure.");
return TRUE;
}
return FALSE;
}
// UART receive event task
static void vUartTask(void* pvParameters)
{
uart_event_t xEvent;
USHORT usResult = 0;
for(;;) {
if (xQueueReceive(xMbUartQueue, (void*)&xEvent, portMAX_DELAY) == pdTRUE) {
ESP_LOGD(TAG, "MB_uart[%d] event:", ucUartNumber);
switch(xEvent.type) {
//Event of UART receiving data
case UART_DATA:
ESP_LOGD(TAG,"Data event, len: %d.", xEvent.size);
// This flag set in the event means that no more
// data received during configured timeout and UART TOUT feature is triggered
if (xEvent.timeout_flag) {
// Read received data and send it to modbus stack
usResult = usMBMasterPortSerialRxPoll(xEvent.size);
ESP_LOGD(TAG,"Timeout occured, processed: %d bytes", usResult);
// Block receiver task until data is not processed
vTaskSuspend(NULL);
}
break;
//Event of HW FIFO overflow detected
case UART_FIFO_OVF:
ESP_LOGD(TAG, "hw fifo overflow.");
xQueueReset(xMbUartQueue);
break;
//Event of UART ring buffer full
case UART_BUFFER_FULL:
ESP_LOGD(TAG, "ring buffer full.");
xQueueReset(xMbUartQueue);
uart_flush_input(ucUartNumber);
break;
//Event of UART RX break detected
case UART_BREAK:
ESP_LOGD(TAG, "uart rx break.");
break;
//Event of UART parity check error
case UART_PARITY_ERR:
ESP_LOGD(TAG, "uart parity error.");
break;
//Event of UART frame error
case UART_FRAME_ERR:
ESP_LOGD(TAG, "uart frame error.");
break;
default:
ESP_LOGD(TAG, "uart event type: %d.", xEvent.type);
break;
}
}
}
vTaskDelete(NULL);
}
/* ----------------------- Start implementation -----------------------------*/
BOOL xMBMasterPortSerialInit( UCHAR ucPORT, ULONG ulBaudRate, UCHAR ucDataBits, eMBParity eParity )
{
esp_err_t xErr = ESP_OK;
// Set communication port number
ucUartNumber = ucPORT;
// Configure serial communication parameters
UCHAR ucParity = UART_PARITY_DISABLE;
UCHAR ucData = UART_DATA_8_BITS;
switch(eParity){
case MB_PAR_NONE:
ucParity = UART_PARITY_DISABLE;
break;
case MB_PAR_ODD:
ucParity = UART_PARITY_ODD;
break;
case MB_PAR_EVEN:
ucParity = UART_PARITY_EVEN;
break;
default:
ESP_LOGE(TAG, "Incorrect parity option: %d", eParity);
return FALSE;
}
switch(ucDataBits){
case 5:
ucData = UART_DATA_5_BITS;
break;
case 6:
ucData = UART_DATA_6_BITS;
break;
case 7:
ucData = UART_DATA_7_BITS;
break;
case 8:
ucData = UART_DATA_8_BITS;
break;
default:
ucData = UART_DATA_8_BITS;
break;
}
uart_config_t xUartConfig = {
.baud_rate = ulBaudRate,
.data_bits = ucData,
.parity = ucParity,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
.rx_flow_ctrl_thresh = 2,
.source_clk = UART_SCLK_APB,
};
// Set UART config
xErr = uart_param_config(ucUartNumber, &xUartConfig);
MB_PORT_CHECK((xErr == ESP_OK),
FALSE, "mb config failure, uart_param_config() returned (0x%x).", xErr);
// Install UART driver, and get the queue.
xErr = uart_driver_install(ucUartNumber, MB_SERIAL_BUF_SIZE, MB_SERIAL_BUF_SIZE,
MB_QUEUE_LENGTH, &xMbUartQueue, MB_PORT_SERIAL_ISR_FLAG);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"mb serial driver failure, uart_driver_install() returned (0x%x).", xErr);
// Set timeout for TOUT interrupt (T3.5 modbus time)
xErr = uart_set_rx_timeout(ucUartNumber, MB_SERIAL_TOUT);
MB_PORT_CHECK((xErr == ESP_OK), FALSE,
"mb serial set rx timeout failure, uart_set_rx_timeout() returned (0x%x).", xErr);
// Set always timeout flag to trigger timeout interrupt even after rx fifo full
uart_set_always_rx_timeout(ucUartNumber, true);
// Create a task to handle UART events
BaseType_t xStatus = xTaskCreatePinnedToCore(vUartTask, "uart_queue_task",
MB_SERIAL_TASK_STACK_SIZE,
NULL, MB_SERIAL_TASK_PRIO,
&xMbTaskHandle, MB_PORT_TASK_AFFINITY);
if (xStatus != pdPASS) {
vTaskDelete(xMbTaskHandle);
// Force exit from function with failure
MB_PORT_CHECK(FALSE, FALSE,
"mb stack serial task creation error. xTaskCreate() returned (0x%x).",
xStatus);
} else {
vTaskSuspend(xMbTaskHandle); // Suspend serial task while stack is not started
}
ESP_LOGD(MB_PORT_TAG,"%s Init serial.", __func__);
return TRUE;
}
void vMBMasterPortSerialClose(void)
{
(void)vTaskDelete(xMbTaskHandle);
ESP_ERROR_CHECK(uart_driver_delete(ucUartNumber));
}
BOOL xMBMasterPortSerialPutByte(CHAR ucByte)
{
// Send one byte to UART transmission buffer
// This function is called by Modbus stack
UCHAR ucLength = uart_write_bytes(ucUartNumber, &ucByte, 1);
return (ucLength == 1);
}
// Get one byte from intermediate RX buffer
BOOL xMBMasterPortSerialGetByte(CHAR* pucByte)
{
assert(pucByte != NULL);
USHORT usLength = uart_read_bytes(ucUartNumber, (uint8_t*)pucByte, 1, MB_SERIAL_RX_TOUT_TICKS);
return (usLength == 1);
}
Reference in New Issue View Git Blame Kopiuj bezpośredni odnośnik