esp-idf/components/esp_common/include/esp_pm.h

183 wiersze
6.3 KiB
C

// Copyright 2016-2017 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include <stdint.h>
#include <stdbool.h>
#include "esp_err.h"
#include "sdkconfig.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/pm.h"
#elif CONFIG_IDF_TARGET_ESP32S2BETA
#include "esp32s2beta/pm.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Power management constraints
*/
typedef enum {
/**
* Require CPU frequency to be at the maximum value set via esp_pm_configure.
* Argument is unused and should be set to 0.
*/
ESP_PM_CPU_FREQ_MAX,
/**
* Require APB frequency to be at the maximum value supported by the chip.
* Argument is unused and should be set to 0.
*/
ESP_PM_APB_FREQ_MAX,
/**
* Prevent the system from going into light sleep.
* Argument is unused and should be set to 0.
*/
ESP_PM_NO_LIGHT_SLEEP,
} esp_pm_lock_type_t;
/**
* @brief Set implementation-specific power management configuration
* @param config pointer to implementation-specific configuration structure (e.g. esp_pm_config_esp32)
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the configuration values are not correct
* - ESP_ERR_NOT_SUPPORTED if certain combination of values is not supported,
* or if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_configure(const void* config);
/**
* @brief Opaque handle to the power management lock
*/
typedef struct esp_pm_lock* esp_pm_lock_handle_t;
/**
* @brief Initialize a lock handle for certain power management parameter
*
* When lock is created, initially it is not taken.
* Call esp_pm_lock_acquire to take the lock.
*
* This function must not be called from an ISR.
*
* @param lock_type Power management constraint which the lock should control
* @param arg argument, value depends on lock_type, see esp_pm_lock_type_t
* @param name arbitrary string identifying the lock (e.g. "wifi" or "spi").
* Used by the esp_pm_dump_locks function to list existing locks.
* May be set to NULL. If not set to NULL, must point to a string which is valid
* for the lifetime of the lock.
* @param[out] out_handle handle returned from this function. Use this handle when calling
* esp_pm_lock_delete, esp_pm_lock_acquire, esp_pm_lock_release.
* Must not be NULL.
* @return
* - ESP_OK on success
* - ESP_ERR_NO_MEM if the lock structure can not be allocated
* - ESP_ERR_INVALID_ARG if out_handle is NULL or type argument is not valid
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_create(esp_pm_lock_type_t lock_type, int arg,
const char* name, esp_pm_lock_handle_t* out_handle);
/**
* @brief Take a power management lock
*
* Once the lock is taken, power management algorithm will not switch to the
* mode specified in a call to esp_pm_lock_create, or any of the lower power
* modes (higher numeric values of 'mode').
*
* The lock is recursive, in the sense that if esp_pm_lock_acquire is called
* a number of times, esp_pm_lock_release has to be called the same number of
* times in order to release the lock.
*
* This function may be called from an ISR.
*
* This function is not thread-safe w.r.t. calls to other esp_pm_lock_*
* functions for the same handle.
*
* @param handle handle obtained from esp_pm_lock_create function
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle is invalid
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_acquire(esp_pm_lock_handle_t handle);
/**
* @brief Release the lock taken using esp_pm_lock_acquire.
*
* Call to this functions removes power management restrictions placed when
* taking the lock.
*
* Locks are recursive, so if esp_pm_lock_acquire is called a number of times,
* esp_pm_lock_release has to be called the same number of times in order to
* actually release the lock.
*
* This function may be called from an ISR.
*
* This function is not thread-safe w.r.t. calls to other esp_pm_lock_*
* functions for the same handle.
*
* @param handle handle obtained from esp_pm_lock_create function
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle is invalid
* - ESP_ERR_INVALID_STATE if lock is not acquired
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_release(esp_pm_lock_handle_t handle);
/**
* @brief Delete a lock created using esp_pm_lock
*
* The lock must be released before calling this function.
*
* This function must not be called from an ISR.
*
* @param handle handle obtained from esp_pm_lock_create function
* @return
* - ESP_OK on success
* - ESP_ERR_INVALID_ARG if the handle argument is NULL
* - ESP_ERR_INVALID_STATE if the lock is still acquired
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_lock_delete(esp_pm_lock_handle_t handle);
/**
* Dump the list of all locks to stderr
*
* This function dumps debugging information about locks created using
* esp_pm_lock_create to an output stream.
*
* This function must not be called from an ISR. If esp_pm_lock_acquire/release
* are called while this function is running, inconsistent results may be
* reported.
*
* @param stream stream to print information to; use stdout or stderr to print
* to the console; use fmemopen/open_memstream to print to a
* string buffer.
* @return
* - ESP_OK on success
* - ESP_ERR_NOT_SUPPORTED if CONFIG_PM_ENABLE is not enabled in sdkconfig
*/
esp_err_t esp_pm_dump_locks(FILE* stream);
#ifdef __cplusplus
}
#endif