kopia lustrzana https://github.com/espressif/esp-idf
354 wiersze
12 KiB
C
354 wiersze
12 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2021 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
/**
|
|
* About test environment UT_T1_GPIO:
|
|
* Please connect GPIO18 and GPIO19
|
|
*/
|
|
#include <stdio.h>
|
|
#include <string.h>
|
|
#include "esp_system.h"
|
|
#include "esp_sleep.h"
|
|
#include "unity.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/rtc_io.h"
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/queue.h"
|
|
#include "esp_err.h"
|
|
#include "esp_log.h"
|
|
#include "soc/rtc_io_periph.h"
|
|
|
|
#if SOC_RTCIO_PIN_COUNT > 0
|
|
|
|
#define RTCIO_CHECK(condition) TEST_ASSERT_MESSAGE((condition == ESP_OK), "ret is not ESP_OK")
|
|
#define RTCIO_VERIFY(condition, msg) TEST_ASSERT_MESSAGE((condition), msg)
|
|
|
|
#define TEST_COUNT 10
|
|
static const char *TAG = "rtcio_test";
|
|
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
#define TEST_GPIO_PIN_COUNT 16
|
|
const int s_test_map[TEST_GPIO_PIN_COUNT] = {
|
|
// GPIO_NUM_0, //GPIO0 // Workaround: GPIO0 is strap pin, can not be used pullup/pulldown test.
|
|
GPIO_NUM_2, //GPIO2
|
|
GPIO_NUM_4, //GPIO4
|
|
// GPIO_NUM_12, //GPIO12 // Workaround: GPIO12 is strap pin, can not be used pullup/pulldown test.
|
|
GPIO_NUM_13, //GPIO13
|
|
GPIO_NUM_14, //GPIO14
|
|
GPIO_NUM_15, //GPIO15
|
|
GPIO_NUM_25, //GPIO25
|
|
GPIO_NUM_26, //GPIO26
|
|
GPIO_NUM_27, //GPIO27
|
|
GPIO_NUM_32, //GPIO32
|
|
GPIO_NUM_33, //GPIO33
|
|
GPIO_NUM_34, //GPIO34
|
|
GPIO_NUM_35, //GPIO35
|
|
GPIO_NUM_36, //GPIO36
|
|
GPIO_NUM_37, //GPIO37
|
|
GPIO_NUM_38, //GPIO38
|
|
GPIO_NUM_39, //GPIO39
|
|
};
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
#define TEST_GPIO_PIN_COUNT 20
|
|
const int s_test_map[TEST_GPIO_PIN_COUNT] = {
|
|
// GPIO_NUM_0, //GPIO0 // Workaround: GPIO0 is strap pin, can not be used pullup/pulldown test.
|
|
GPIO_NUM_1, //GPIO1
|
|
GPIO_NUM_2, //GPIO2
|
|
GPIO_NUM_3, //GPIO3
|
|
GPIO_NUM_4, //GPIO4
|
|
GPIO_NUM_5, //GPIO5
|
|
GPIO_NUM_6, //GPIO6
|
|
GPIO_NUM_7, //GPIO7
|
|
GPIO_NUM_8, //GPIO8
|
|
GPIO_NUM_9, //GPIO9
|
|
GPIO_NUM_10, //GPIO10
|
|
GPIO_NUM_11, //GPIO11
|
|
GPIO_NUM_12, //GPIO12
|
|
GPIO_NUM_13, //GPIO13
|
|
GPIO_NUM_14, //GPIO14
|
|
GPIO_NUM_15, //GPIO15
|
|
GPIO_NUM_16, //GPIO16
|
|
GPIO_NUM_17, //GPIO17
|
|
// GPIO_NUM_18, //GPIO18 // Workaround: IO18 is pullup outside in ESP32S2-Saola Runner.
|
|
GPIO_NUM_19, //GPIO19
|
|
GPIO_NUM_20, //GPIO20
|
|
GPIO_NUM_21, //GPIO21
|
|
};
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S3
|
|
#define TEST_GPIO_PIN_COUNT 21
|
|
const int s_test_map[TEST_GPIO_PIN_COUNT] = {
|
|
// GPIO_NUM_0, //GPIO0 // Workaround: GPIO0 is strap pin, can not be used pullup/pulldown test.
|
|
GPIO_NUM_1, //GPIO1
|
|
GPIO_NUM_2, //GPIO2
|
|
GPIO_NUM_3, //GPIO3
|
|
GPIO_NUM_4, //GPIO4
|
|
GPIO_NUM_5, //GPIO5
|
|
GPIO_NUM_6, //GPIO6
|
|
GPIO_NUM_7, //GPIO7
|
|
GPIO_NUM_8, //GPIO8
|
|
GPIO_NUM_9, //GPIO9
|
|
GPIO_NUM_10, //GPIO10
|
|
GPIO_NUM_11, //GPIO11
|
|
GPIO_NUM_12, //GPIO12
|
|
GPIO_NUM_13, //GPIO13
|
|
GPIO_NUM_14, //GPIO14
|
|
GPIO_NUM_15, //GPIO15
|
|
GPIO_NUM_16, //GPIO16
|
|
GPIO_NUM_17, //GPIO17
|
|
GPIO_NUM_18, //GPIO18
|
|
GPIO_NUM_19, //GPIO19
|
|
GPIO_NUM_20, //GPIO20
|
|
GPIO_NUM_21, //GPIO21
|
|
};
|
|
#endif
|
|
|
|
/*
|
|
* Test output/input function.
|
|
*/
|
|
TEST_CASE("RTCIO input/output test", "[rtcio]")
|
|
{
|
|
ESP_LOGI(TAG, "RTCIO input/output test");
|
|
// init rtcio
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_init(i) );
|
|
RTCIO_CHECK( rtc_gpio_set_direction(i, RTC_GPIO_MODE_INPUT_OUTPUT) );
|
|
RTCIO_CHECK( rtc_gpio_pullup_dis(i) );
|
|
RTCIO_CHECK( rtc_gpio_pulldown_dis(i) );
|
|
ESP_LOGI(TAG, "gpio %d init", i);
|
|
}
|
|
}
|
|
|
|
for (int cnt = 0; cnt < TEST_COUNT; cnt++) {
|
|
uint32_t level = cnt % 2;
|
|
ESP_LOGI(TAG, "RTCIO output level %d", level);
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_set_level(i, level) );
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
if (rtc_gpio_get_level(i) != level) {
|
|
ESP_LOGE(TAG, "RTCIO input/output test err, gpio%d", i);
|
|
}
|
|
}
|
|
}
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
}
|
|
|
|
// Deinit rtcio
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_deinit(i) );
|
|
}
|
|
}
|
|
ESP_LOGI(TAG, "RTCIO input/output test over");
|
|
}
|
|
|
|
/*
|
|
* Test pullup/pulldown function.
|
|
* Note: extern circuit should not connect.
|
|
*/
|
|
TEST_CASE("RTCIO pullup/pulldown test", "[rtcio]")
|
|
{
|
|
ESP_LOGI(TAG, "RTCIO pullup/pulldown test");
|
|
// init rtcio
|
|
for (int i = 0; i < TEST_GPIO_PIN_COUNT; i++) {
|
|
int num = rtc_io_number_get(s_test_map[i]);
|
|
if (rtc_gpio_is_valid_gpio(s_test_map[i]) && num > 0 && rtc_io_desc[num].pullup != 0) {
|
|
RTCIO_CHECK( rtc_gpio_init(s_test_map[i]) );
|
|
RTCIO_CHECK( rtc_gpio_set_direction(s_test_map[i], RTC_GPIO_MODE_INPUT_ONLY) );
|
|
RTCIO_CHECK( rtc_gpio_pullup_dis(s_test_map[i]) );
|
|
RTCIO_CHECK( rtc_gpio_pulldown_dis(s_test_map[i]) );
|
|
ESP_LOGI(TAG, "gpio %d init", s_test_map[i]);
|
|
}
|
|
}
|
|
|
|
for (int cnt = 0; cnt < TEST_COUNT; cnt++) {
|
|
uint32_t level = cnt % 2;
|
|
ESP_LOGI(TAG, "RTCIO pull level %d", level);
|
|
for (int i = 0; i < TEST_GPIO_PIN_COUNT; i++) {
|
|
int num = rtc_io_number_get(s_test_map[i]);
|
|
if (rtc_gpio_is_valid_gpio(s_test_map[i]) && num > 0 && rtc_io_desc[num].pullup != 0) {
|
|
if (level) {
|
|
RTCIO_CHECK( rtc_gpio_pulldown_dis(s_test_map[i]) );
|
|
RTCIO_CHECK( rtc_gpio_pullup_en(s_test_map[i]) );
|
|
} else {
|
|
RTCIO_CHECK( rtc_gpio_pullup_dis(s_test_map[i]) );
|
|
RTCIO_CHECK( rtc_gpio_pulldown_en(s_test_map[i]) );
|
|
}
|
|
vTaskDelay(20 / portTICK_RATE_MS);
|
|
if (rtc_gpio_get_level(s_test_map[i]) != level) {
|
|
ESP_LOGE(TAG, "RTCIO pullup/pulldown test err, gpio%d", s_test_map[i]);
|
|
}
|
|
}
|
|
}
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
}
|
|
|
|
// Deinit rtcio
|
|
for (int i = 0; i < TEST_GPIO_PIN_COUNT; i++) {
|
|
int num = rtc_io_number_get(s_test_map[i]);
|
|
if (rtc_gpio_is_valid_gpio(s_test_map[i]) && num > 0 && rtc_io_desc[num].pullup != 0) {
|
|
RTCIO_CHECK( rtc_gpio_deinit(s_test_map[i]) );
|
|
}
|
|
}
|
|
ESP_LOGI(TAG, "RTCIO pullup/pulldown test over");
|
|
}
|
|
|
|
/*
|
|
* Test output OD function.
|
|
*/
|
|
TEST_CASE("RTCIO output OD test", "[rtcio]")
|
|
{
|
|
ESP_LOGI(TAG, "RTCIO output OD test");
|
|
// init rtcio
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_init(i) );
|
|
RTCIO_CHECK( rtc_gpio_set_direction(i, RTC_GPIO_MODE_INPUT_OUTPUT_OD) );
|
|
RTCIO_CHECK( rtc_gpio_pullup_en(i) );
|
|
RTCIO_CHECK( rtc_gpio_pulldown_dis(i) );
|
|
ESP_LOGI(TAG, "gpio %d init", i);
|
|
}
|
|
}
|
|
|
|
for (int cnt = 0; cnt < TEST_COUNT; cnt++) {
|
|
uint32_t level = cnt % 2;
|
|
ESP_LOGI(TAG, "RTCIO output level %d", level);
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_set_level(i, level) );
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
if (rtc_gpio_get_level(i) != level) {
|
|
ESP_LOGE(TAG, "RTCIO output OD test err, gpio%d", i);
|
|
}
|
|
}
|
|
}
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
}
|
|
|
|
// Deinit rtcio
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_deinit(i) );
|
|
}
|
|
}
|
|
ESP_LOGI(TAG, "RTCIO output OD test over");
|
|
}
|
|
|
|
/*
|
|
* Test rtcio hold function.
|
|
*/
|
|
TEST_CASE("RTCIO output hold test", "[rtcio]")
|
|
{
|
|
ESP_LOGI(TAG, "RTCIO output hold test");
|
|
// init rtcio
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_init(i) );
|
|
RTCIO_CHECK( rtc_gpio_set_direction(i, RTC_GPIO_MODE_INPUT_OUTPUT_OD) );
|
|
RTCIO_CHECK( rtc_gpio_pullup_en(i) );
|
|
RTCIO_CHECK( rtc_gpio_pulldown_dis(i) );
|
|
RTCIO_CHECK( rtc_gpio_set_level(i, 1) );
|
|
ESP_LOGI(TAG, "gpio %d init, level 1", i);
|
|
}
|
|
}
|
|
|
|
// hold all output rtcio.
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_hold_en(i) );
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
RTCIO_CHECK( rtc_gpio_set_level(i, 0) );
|
|
ESP_LOGI(TAG, "RTCIO output pin hold, then set level 0");
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
if (rtc_gpio_get_level(i) == 0) {
|
|
ESP_LOGE(TAG, "RTCIO hold test err, gpio%d", i);
|
|
}
|
|
}
|
|
}
|
|
|
|
//unhold all rtcio.
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_hold_dis(i) );
|
|
}
|
|
}
|
|
|
|
// check the unhold status
|
|
for (int cnt = 0; cnt < 4; cnt++) {
|
|
uint32_t level = cnt % 2;
|
|
ESP_LOGI(TAG, "RTCIO output level %d", level);
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_set_level(i, level) );
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
if (rtc_gpio_get_level(i) != level) {
|
|
ESP_LOGE(TAG, "RTCIO output OD test err, gpio%d", i);
|
|
}
|
|
}
|
|
}
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
}
|
|
|
|
// Deinit rtcio
|
|
for (int i = 0; i < GPIO_PIN_COUNT; i++) {
|
|
if (GPIO_IS_VALID_OUTPUT_GPIO(i) && rtc_gpio_is_valid_gpio(i)) {
|
|
RTCIO_CHECK( rtc_gpio_deinit(i) );
|
|
}
|
|
}
|
|
ESP_LOGI(TAG, "RTCIO hold test over");
|
|
}
|
|
|
|
// It is not necessary to test every rtcio pin, it will take too much ci testing time for deep sleep
|
|
// Only tests on s_test_map[TEST_RTCIO_DEEP_SLEEP_PIN_INDEX] pin
|
|
// (ESP32: IO25, ESP32S2, S3: IO6) these pads' default configuration is low level
|
|
#define TEST_RTCIO_DEEP_SLEEP_PIN_INDEX 5
|
|
|
|
static void rtcio_deep_sleep_hold_test_first_stage(void)
|
|
{
|
|
printf("configure rtcio pin to hold during deep sleep");
|
|
int io_num = s_test_map[TEST_RTCIO_DEEP_SLEEP_PIN_INDEX];
|
|
|
|
TEST_ESP_OK(esp_sleep_enable_timer_wakeup(2000000));
|
|
|
|
gpio_config_t io_conf = {
|
|
.intr_type = GPIO_INTR_DISABLE,
|
|
.mode = GPIO_MODE_INPUT_OUTPUT,
|
|
.pin_bit_mask = (1ULL << io_num),
|
|
.pull_down_en = 0,
|
|
.pull_up_en = 0,
|
|
};
|
|
gpio_config(&io_conf);
|
|
|
|
gpio_set_level(io_num, 1);
|
|
// Enable global persistence
|
|
TEST_ESP_OK(gpio_hold_en(io_num));
|
|
|
|
esp_deep_sleep_start();
|
|
}
|
|
|
|
static void rtcio_deep_sleep_hold_test_second_stage(void)
|
|
{
|
|
int io_num = s_test_map[TEST_RTCIO_DEEP_SLEEP_PIN_INDEX];
|
|
// Check reset reason is waking up from deepsleep
|
|
TEST_ASSERT_EQUAL(ESP_RST_DEEPSLEEP, esp_reset_reason());
|
|
// Pin should stay at high level after the deep sleep
|
|
TEST_ASSERT_EQUAL_INT(1, gpio_get_level(io_num));
|
|
|
|
gpio_hold_dis(io_num);
|
|
}
|
|
|
|
/*
|
|
* Test rtcio hold function during deep sleep.
|
|
* This test case can only check the hold state after waking up from deep sleep
|
|
* If you want to check that the rtcio hold function works properly during deep sleep,
|
|
* please use logic analyzer or oscillscope
|
|
*/
|
|
TEST_CASE_MULTIPLE_STAGES("RTCIO_deep_sleep_output_hold_test", "[rtcio]",
|
|
rtcio_deep_sleep_hold_test_first_stage,
|
|
rtcio_deep_sleep_hold_test_second_stage)
|
|
#endif // SOC_RTCIO_PIN_COUNT > 0
|