kopia lustrzana https://github.com/espressif/esp-idf
338 wiersze
11 KiB
C
338 wiersze
11 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Unlicense OR CC0-1.0
|
|
*/
|
|
/* This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
|
|
// This example uses SDMMC or SDSPI peripheral to communicate with SD card.
|
|
|
|
#include <stdio.h>
|
|
#include <stdbool.h>
|
|
#include <sys/time.h>
|
|
#include "esp_log.h"
|
|
#include "esp_check.h"
|
|
#include "esp_partition.h"
|
|
#include "esp_vfs_fat.h"
|
|
#include "esp_spiffs.h"
|
|
#include "soc/soc_caps.h"
|
|
#if SOC_SDMMC_HOST_SUPPORTED
|
|
#include "driver/sdmmc_host.h"
|
|
#endif
|
|
#include "driver/sdspi_host.h"
|
|
#include "driver/sdmmc_defs.h"
|
|
#include "sdmmc_cmd.h"
|
|
#include "wear_levelling.h"
|
|
|
|
#include "sdkconfig.h"
|
|
#include "tests.h"
|
|
|
|
static const char *TAG = "example";
|
|
static const char *flash_partition_label = "storage";
|
|
wl_handle_t s_wl_handle = WL_INVALID_HANDLE;
|
|
sdmmc_host_t host_g;
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
sdmmc_slot_config_t slot_config_g;
|
|
#else // CONFIG_EXAMPLE_USE_SDMMC
|
|
sdspi_device_config_t slot_config_g;
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
|
|
#ifdef CONFIG_EXAMPLE_SD_FREQ_PROBING
|
|
#define EXAMPLE_SD_FREQ SDMMC_FREQ_PROBING
|
|
#elif CONFIG_EXAMPLE_SD_FREQ_DEFAULT
|
|
#define EXAMPLE_SD_FREQ SDMMC_FREQ_DEFAULT
|
|
#elif CONFIG_EXAMPLE_SD_FREQ_HIGHSPEED
|
|
#define EXAMPLE_SD_FREQ SDMMC_FREQ_HIGHSPEED
|
|
#elif CONFIG_EXAMPLE_SD_FREQ_CUSTOM
|
|
#define EXAMPLE_SD_FREQ CONFIG_EXAMPLE_SD_FREQ_CUSTOM_VAL
|
|
#else
|
|
#define EXAMPLE_SD_FREQ SDMMC_FREQ_DEFAULT
|
|
#endif
|
|
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
void init_sd_config(sdmmc_host_t *out_host, sdmmc_slot_config_t *out_slot_config, int freq_khz);
|
|
#else // CONFIG_EXAMPLE_USE_SDMMC
|
|
void init_sd_config(sdmmc_host_t *out_host, sdspi_device_config_t *out_slot_config, int freq_khz);
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
void test_spiflash_raw(void);
|
|
void test_spiflash_fatfs(void);
|
|
void test_spiflash_spiffs(void);
|
|
void test_sd_raw(void);
|
|
void test_sd_fatfs(void);
|
|
|
|
void app_main(void)
|
|
{
|
|
#ifdef CONFIG_EXAMPLE_TEST_SPIFLASH
|
|
ESP_LOGI(TAG, "Internal flash test");
|
|
|
|
/* SPI flash - raw access */
|
|
#ifdef CONFIG_EXAMPLE_TEST_SPIFLASH_RAW
|
|
test_spiflash_raw();
|
|
#endif // CONFIG_EXAMPLE_TEST_SPIFLASH_RAW
|
|
|
|
/* SPI flash - FATFS */
|
|
#ifdef CONFIG_EXAMPLE_TEST_SPIFLASH_FATFS
|
|
test_spiflash_fatfs();
|
|
#endif // CONFIG_EXAMPLE_TEST_SPIFLASH_FATFS
|
|
|
|
/* SPI flash - SPIFFS */
|
|
#ifdef CONFIG_EXAMPLE_TEST_SPIFLASH_SPIFFS
|
|
test_spiflash_spiffs();
|
|
#endif // CONFIG_EXAMPLE_TEST_SPIFLASH_SPIFFS
|
|
|
|
#endif // CONFIG_EXAMPLE_TEST_SPIFLASH
|
|
#ifdef CONFIG_EXAMPLE_TEST_SD_CARD
|
|
ESP_LOGI(TAG, "SD card test");
|
|
|
|
ESP_LOGI(TAG, "Initializing SD card");
|
|
init_sd_config(&host_g, &slot_config_g, EXAMPLE_SD_FREQ);
|
|
|
|
/* SD card - raw access */
|
|
#ifdef CONFIG_EXAMPLE_TEST_SD_CARD_RAW
|
|
test_sd_raw();
|
|
#endif // CONFIG_EXAMPLE_TEST_SD_CARD_RAW
|
|
|
|
/* SD card - FATFS */
|
|
#ifdef CONFIG_EXAMPLE_TEST_SD_CARD_FATFS
|
|
test_sd_fatfs();
|
|
#endif // CONFIG_EXAMPLE_TEST_SD_CARD_FATFS
|
|
|
|
#endif // CONFIG_EXAMPLE_TEST_SD_CARD
|
|
}
|
|
|
|
void test_spiflash_raw(void)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
ESP_LOGI(TAG, "Mountig WL layer...");
|
|
const esp_partition_t *data_partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA,
|
|
ESP_PARTITION_SUBTYPE_DATA_UNDEFINED, flash_partition_label);
|
|
if (data_partition == NULL) {
|
|
ESP_LOGE(TAG, "Could not find partition \"%s\"", flash_partition_label);
|
|
ESP_ERROR_CHECK(ESP_ERR_NOT_FOUND);
|
|
}
|
|
ret = wl_mount(data_partition, &s_wl_handle);
|
|
if (ret != ESP_OK) {
|
|
ESP_LOGE(TAG, "Failed to mount wear levelling layer, ret = %i", ret);
|
|
ESP_ERROR_CHECK(ret);
|
|
}
|
|
ESP_LOGI(TAG, "WL layer mounted");
|
|
|
|
spiflash_speed_test_raw_run();
|
|
|
|
ret = wl_unmount(s_wl_handle);
|
|
ESP_ERROR_CHECK(ret);
|
|
ESP_LOGI(TAG, "WL layer unmounted");
|
|
}
|
|
|
|
void test_spiflash_fatfs(void)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
ESP_LOGI(TAG, "Mounting FATFS partition...");
|
|
esp_vfs_fat_sdmmc_mount_config_t mount_config_spiflash = {
|
|
.format_if_mount_failed = true,
|
|
.max_files = 5,
|
|
.allocation_unit_size = 16 * 1024};
|
|
ret = esp_vfs_fat_spiflash_mount_rw_wl(FLASH_BASE_PATH, flash_partition_label, &mount_config_spiflash, &s_wl_handle);
|
|
if (ret == ESP_OK) {
|
|
ESP_LOGI(TAG, "FATFS mounted to %s", FLASH_BASE_PATH);
|
|
} else {
|
|
ESP_LOGE(TAG, "Failed to mount FATFS (%s)", esp_err_to_name(ret));
|
|
ESP_ERROR_CHECK(ret);
|
|
}
|
|
|
|
spiflash_speed_test_fs_run();
|
|
|
|
// Unregister FATFS and unmount storage partition
|
|
ret = esp_vfs_fat_spiflash_unmount_rw_wl(FLASH_BASE_PATH, s_wl_handle);
|
|
ESP_ERROR_CHECK(ret);
|
|
ESP_LOGI(TAG, "FATFS partition unmounted");
|
|
}
|
|
|
|
void test_spiflash_spiffs(void)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
ESP_LOGI(TAG, "Mounting SPIFFS partition...");
|
|
esp_vfs_spiffs_conf_t conf = {
|
|
.base_path = FLASH_BASE_PATH,
|
|
.partition_label = flash_partition_label,
|
|
.max_files = 5,
|
|
.format_if_mount_failed = true};
|
|
|
|
// Use settings defined above to initialize and mount SPIFFS filesystem.
|
|
// Note: esp_vfs_spiffs_register is an all-in-one convenience function.
|
|
ret = esp_vfs_spiffs_register(&conf);
|
|
|
|
if (ret == ESP_OK) {
|
|
ESP_LOGI(TAG, "SPIFFS mounted to %s", FLASH_BASE_PATH);
|
|
} else {
|
|
if (ret == ESP_FAIL) {
|
|
ESP_LOGE(TAG, "Failed to mount or format filesystem");
|
|
} else if (ret == ESP_ERR_NOT_FOUND) {
|
|
ESP_LOGE(TAG, "Failed to find SPIFFS partition");
|
|
} else {
|
|
ESP_LOGE(TAG, "Failed to initialize SPIFFS (%s)", esp_err_to_name(ret));
|
|
}
|
|
ESP_ERROR_CHECK(ret);
|
|
}
|
|
|
|
spiflash_speed_test_fs_run();
|
|
|
|
// Unregister SPIFFS and unmount storage partition
|
|
ret = esp_vfs_spiffs_unregister(conf.partition_label);
|
|
ESP_ERROR_CHECK(ret);
|
|
ESP_LOGI(TAG, "SPIFFS partition unmounted");
|
|
}
|
|
|
|
void test_sd_raw(void)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
sdmmc_card_t *card;
|
|
|
|
ESP_LOGI(TAG, "Mounting SD card - raw access");
|
|
card = (sdmmc_card_t *)malloc(sizeof(sdmmc_card_t));
|
|
if (card == NULL) {
|
|
ESP_LOGE(TAG, "Failed to allocate sdmmc_card_t structure");
|
|
ESP_ERROR_CHECK(ESP_ERR_NO_MEM);
|
|
}
|
|
// Initialize the interface
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
ret = sdmmc_host_init();
|
|
ESP_ERROR_CHECK(ret);
|
|
ret = sdmmc_host_init_slot(SDMMC_HOST_SLOT_1, &slot_config_g);
|
|
ESP_ERROR_CHECK(ret);
|
|
#elif CONFIG_EXAMPLE_USE_SDSPI // CONFIG_EXAMPLE_USE_SDMMC
|
|
int card_handle = -1;
|
|
ret = sdspi_host_init_device((const sdspi_device_config_t *)&slot_config_g, &card_handle);
|
|
ESP_ERROR_CHECK(ret);
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
|
|
ret = sdmmc_card_init(&host_g, card);
|
|
if (ret != ESP_OK) {
|
|
ESP_LOGE(TAG, "Failed to initialize SD card (%s)", esp_err_to_name(ret));
|
|
ESP_LOGE(TAG, "If you were using SDMMC and switched to SPI reinsert the SD card or power cycle the board");
|
|
free(card);
|
|
ESP_ERROR_CHECK(ret);
|
|
}
|
|
ESP_LOGI(TAG, "SD card mounted - raw access");
|
|
sdmmc_card_print_info(stdout, card);
|
|
|
|
sdcard_speed_test_raw_run(card);
|
|
|
|
// Unmount SD card
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
sdmmc_host_deinit();
|
|
#else // CONFIG_EXAMPLE_USE_SDMMC
|
|
sdspi_host_deinit();
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
free(card);
|
|
ESP_LOGI(TAG, "SD card unmounted - raw access");
|
|
}
|
|
|
|
void test_sd_fatfs(void)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
sdmmc_card_t *card;
|
|
|
|
ESP_LOGI(TAG, "Mounting SD card - FATFS");
|
|
esp_vfs_fat_sdmmc_mount_config_t mount_config_sdcard = {
|
|
.format_if_mount_failed = true,
|
|
.max_files = 5,
|
|
.allocation_unit_size = 16 * 1024};
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
ret = esp_vfs_fat_sdmmc_mount(SD_BASE_PATH, &host_g, &slot_config_g, &mount_config_sdcard, &card);
|
|
#else // CONFIG_EXAMPLE_USE_SDMMC
|
|
ret = esp_vfs_fat_sdspi_mount(SD_BASE_PATH, &host_g, &slot_config_g, &mount_config_sdcard, &card);
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
|
|
if (ret != ESP_OK) {
|
|
ESP_LOGE(TAG, "Failed to initialize the card (%s). "
|
|
"Make sure SD card lines have pull-up resistors in place.",
|
|
esp_err_to_name(ret));
|
|
ESP_ERROR_CHECK(ret);
|
|
}
|
|
sdmmc_card_print_info(stdout, card);
|
|
ESP_LOGI(TAG, "SD card mounted - FATFS");
|
|
|
|
sdcard_speed_test_fatfs_run();
|
|
|
|
// Unmount SD card
|
|
esp_vfs_fat_sdcard_unmount(SD_BASE_PATH, card);
|
|
ESP_LOGI(TAG, "SD card unmounted - FATFS");
|
|
}
|
|
|
|
#ifdef CONFIG_EXAMPLE_TEST_SD_CARD
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
void init_sd_config(sdmmc_host_t *out_host, sdmmc_slot_config_t *out_slot_config, int freq_khz) {
|
|
#else // CONFIG_EXAMPLE_USE_SDMMC
|
|
void init_sd_config(sdmmc_host_t *out_host, sdspi_device_config_t *out_slot_config, int freq_khz) {
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
|
|
// By default, SD card frequency is initialized to SDMMC_FREQ_DEFAULT (20MHz)
|
|
// For setting a specific frequency, use host.max_freq_khz
|
|
// (range 400kHz - 40MHz for SDMMC, 400kHz - 20MHz for SDSPI)
|
|
// Example: for fixed frequency of 10MHz, use host.max_freq_khz = 10000;
|
|
#ifdef CONFIG_EXAMPLE_USE_SDMMC
|
|
ESP_LOGI(TAG, "Using SDMMC peripheral");
|
|
sdmmc_host_t host = SDMMC_HOST_DEFAULT();
|
|
host.max_freq_khz = freq_khz;
|
|
|
|
// This initializes the slot without card detect (CD) and write protect (WP) signals.
|
|
// Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
|
|
sdmmc_slot_config_t slot_config = SDMMC_SLOT_CONFIG_DEFAULT();
|
|
|
|
// Set bus width to use:
|
|
#ifdef CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4
|
|
slot_config.width = 4;
|
|
#else
|
|
slot_config.width = 1;
|
|
#endif
|
|
|
|
// On chips where the GPIOs used for SD card can be configured, set them in
|
|
// the slot_config structure:
|
|
#ifdef CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
|
|
slot_config.clk = CONFIG_EXAMPLE_PIN_CLK;
|
|
slot_config.cmd = CONFIG_EXAMPLE_PIN_CMD;
|
|
slot_config.d0 = CONFIG_EXAMPLE_PIN_D0;
|
|
#ifdef CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4
|
|
slot_config.d1 = CONFIG_EXAMPLE_PIN_D1;
|
|
slot_config.d2 = CONFIG_EXAMPLE_PIN_D2;
|
|
slot_config.d3 = CONFIG_EXAMPLE_PIN_D3;
|
|
#endif // CONFIG_EXAMPLE_SDMMC_BUS_WIDTH_4
|
|
#endif // CONFIG_SOC_SDMMC_USE_GPIO_MATRIX
|
|
|
|
// Enable internal pullups on enabled pins. The internal pullups
|
|
// are insufficient however, please make sure 10k external pullups are
|
|
// connected on the bus. This is for debug / example purpose only.
|
|
slot_config.flags |= SDMMC_SLOT_FLAG_INTERNAL_PULLUP;
|
|
#else // CONFIG_EXAMPLE_USE_SDMMC
|
|
ESP_LOGI(TAG, "Using SPI peripheral");
|
|
sdmmc_host_t host = SDSPI_HOST_DEFAULT();
|
|
host.max_freq_khz = freq_khz;
|
|
|
|
spi_bus_config_t bus_cfg = {
|
|
.mosi_io_num = CONFIG_EXAMPLE_PIN_MOSI,
|
|
.miso_io_num = CONFIG_EXAMPLE_PIN_MISO,
|
|
.sclk_io_num = CONFIG_EXAMPLE_PIN_CLK,
|
|
.quadwp_io_num = -1,
|
|
.quadhd_io_num = -1,
|
|
.max_transfer_sz = 4000,
|
|
};
|
|
esp_err_t ret = spi_bus_initialize(host.slot, &bus_cfg, SDSPI_DEFAULT_DMA);
|
|
ESP_ERROR_CHECK(ret);
|
|
|
|
// This initializes the slot without card detect (CD) and write protect (WP) signals.
|
|
// Modify slot_config.gpio_cd and slot_config.gpio_wp if your board has these signals.
|
|
sdspi_device_config_t slot_config = SDSPI_DEVICE_CONFIG_DEFAULT();
|
|
slot_config.gpio_cs = CONFIG_EXAMPLE_PIN_CS;
|
|
slot_config.host_id = host.slot;
|
|
#endif // CONFIG_EXAMPLE_USE_SDSPI
|
|
*out_host = host;
|
|
*out_slot_config = slot_config;
|
|
}
|
|
#endif // CONFIG_EXAMPLE_TEST_SD_CARD
|