esp-idf/components/driver/spi_slave_hd.c

587 wiersze
21 KiB
C

/*
* SPDX-FileCopyrightText: 2010-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#include "esp_log.h"
#include "esp_memory_utils.h"
#include "freertos/FreeRTOS.h"
#include "freertos/semphr.h"
#include "freertos/queue.h"
#include "freertos/ringbuf.h"
#include "driver/gpio.h"
#include "esp_private/spi_common_internal.h"
#include "driver/spi_slave_hd.h"
#include "hal/spi_slave_hd_hal.h"
#if (SOC_SPI_PERIPH_NUM == 2)
#define VALID_HOST(x) ((x) == SPI2_HOST)
#elif (SOC_SPI_PERIPH_NUM == 3)
#define VALID_HOST(x) ((x) >= SPI2_HOST && (x) <= SPI3_HOST)
#endif
#define SPIHD_CHECK(cond,warn,ret) do{if(!(cond)){ESP_LOGE(TAG, warn); return ret;}} while(0)
typedef struct {
bool dma_enabled;
int max_transfer_sz;
uint32_t flags;
portMUX_TYPE int_spinlock;
intr_handle_t intr;
intr_handle_t intr_dma;
spi_slave_hd_callback_config_t callback;
spi_slave_hd_hal_context_t hal;
bool append_mode;
QueueHandle_t tx_trans_queue;
QueueHandle_t tx_ret_queue;
QueueHandle_t rx_trans_queue;
QueueHandle_t rx_ret_queue;
QueueHandle_t tx_cnting_sem;
QueueHandle_t rx_cnting_sem;
spi_slave_hd_data_t* tx_desc;
spi_slave_hd_data_t* rx_desc;
#ifdef CONFIG_PM_ENABLE
esp_pm_lock_handle_t pm_lock;
#endif
} spi_slave_hd_slot_t;
static spi_slave_hd_slot_t *spihost[SOC_SPI_PERIPH_NUM];
static const char TAG[] = "slave_hd";
static void spi_slave_hd_intr_segment(void *arg);
#if CONFIG_IDF_TARGET_ESP32S2
//Append mode is only supported on ESP32S2 now
static void spi_slave_hd_intr_append(void *arg);
#endif
esp_err_t spi_slave_hd_init(spi_host_device_t host_id, const spi_bus_config_t *bus_config,
const spi_slave_hd_slot_config_t *config)
{
bool spi_chan_claimed;
bool append_mode = (config->flags & SPI_SLAVE_HD_APPEND_MODE);
uint32_t actual_tx_dma_chan = 0;
uint32_t actual_rx_dma_chan = 0;
esp_err_t ret = ESP_OK;
SPIHD_CHECK(VALID_HOST(host_id), "invalid host", ESP_ERR_INVALID_ARG);
#if CONFIG_IDF_TARGET_ESP32S2
SPIHD_CHECK(config->dma_chan == SPI_DMA_DISABLED || config->dma_chan == (int)host_id || config->dma_chan == SPI_DMA_CH_AUTO, "invalid dma channel", ESP_ERR_INVALID_ARG);
#elif SOC_GDMA_SUPPORTED
SPIHD_CHECK(config->dma_chan == SPI_DMA_DISABLED || config->dma_chan == SPI_DMA_CH_AUTO, "invalid dma channel, chip only support spi dma channel auto-alloc", ESP_ERR_INVALID_ARG);
#endif
#if !CONFIG_IDF_TARGET_ESP32S2
//Append mode is only supported on ESP32S2 now
SPIHD_CHECK(append_mode == 0, "Append mode is only supported on ESP32S2 now", ESP_ERR_INVALID_ARG);
#endif
spi_chan_claimed = spicommon_periph_claim(host_id, "slave_hd");
SPIHD_CHECK(spi_chan_claimed, "host already in use", ESP_ERR_INVALID_STATE);
spi_slave_hd_slot_t* host = calloc(1, sizeof(spi_slave_hd_slot_t));
if (host == NULL) {
ret = ESP_ERR_NO_MEM;
goto cleanup;
}
spihost[host_id] = host;
host->int_spinlock = (portMUX_TYPE)portMUX_INITIALIZER_UNLOCKED;
host->dma_enabled = (config->dma_chan != SPI_DMA_DISABLED);
if (host->dma_enabled) {
ret = spicommon_dma_chan_alloc(host_id, config->dma_chan, &actual_tx_dma_chan, &actual_rx_dma_chan);
if (ret != ESP_OK) {
goto cleanup;
}
}
ret = spicommon_bus_initialize_io(host_id, bus_config, SPICOMMON_BUSFLAG_SLAVE | bus_config->flags, &host->flags);
if (ret != ESP_OK) {
goto cleanup;
}
gpio_set_direction(config->spics_io_num, GPIO_MODE_INPUT);
spicommon_cs_initialize(host_id, config->spics_io_num, 0,
!(bus_config->flags & SPICOMMON_BUSFLAG_NATIVE_PINS));
host->append_mode = append_mode;
spi_slave_hd_hal_config_t hal_config = {
.host_id = host_id,
.dma_in = SPI_LL_GET_HW(host_id),
.dma_out = SPI_LL_GET_HW(host_id),
.dma_enabled = host->dma_enabled,
.tx_dma_chan = actual_tx_dma_chan,
.rx_dma_chan = actual_rx_dma_chan,
.append_mode = append_mode,
.mode = config->mode,
.tx_lsbfirst = (config->flags & SPI_SLAVE_HD_RXBIT_LSBFIRST),
.rx_lsbfirst = (config->flags & SPI_SLAVE_HD_TXBIT_LSBFIRST),
};
if (host->dma_enabled) {
//Malloc for all the DMA descriptors
uint32_t total_desc_size = spi_slave_hd_hal_get_total_desc_size(&host->hal, bus_config->max_transfer_sz);
host->hal.dmadesc_tx = heap_caps_malloc(total_desc_size, MALLOC_CAP_DMA);
host->hal.dmadesc_rx = heap_caps_malloc(total_desc_size, MALLOC_CAP_DMA);
if (!host->hal.dmadesc_tx || !host->hal.dmadesc_rx) {
ret = ESP_ERR_NO_MEM;
goto cleanup;
}
//Get the actual SPI bus transaction size in bytes.
host->max_transfer_sz = spi_salve_hd_hal_get_max_bus_size(&host->hal);
} else {
//We're limited to non-DMA transfers: the SPI work registers can hold 64 bytes at most.
host->max_transfer_sz = 0;
}
//Init the hal according to the hal_config set above
spi_slave_hd_hal_init(&host->hal, &hal_config);
#ifdef CONFIG_PM_ENABLE
ret = esp_pm_lock_create(ESP_PM_APB_FREQ_MAX, 0, "spi_slave", &host->pm_lock);
if (ret != ESP_OK) {
goto cleanup;
}
// Lock APB frequency while SPI slave driver is in use
esp_pm_lock_acquire(host->pm_lock);
#endif //CONFIG_PM_ENABLE
//Create Queues and Semaphores
host->tx_ret_queue = xQueueCreate(config->queue_size, sizeof(spi_slave_hd_data_t *));
host->rx_ret_queue = xQueueCreate(config->queue_size, sizeof(spi_slave_hd_data_t *));
if (!host->append_mode) {
host->tx_trans_queue = xQueueCreate(config->queue_size, sizeof(spi_slave_hd_data_t *));
host->rx_trans_queue = xQueueCreate(config->queue_size, sizeof(spi_slave_hd_data_t *));
if (!host->tx_trans_queue || !host->rx_trans_queue) {
ret = ESP_ERR_NO_MEM;
goto cleanup;
}
}
#if CONFIG_IDF_TARGET_ESP32S2
//Append mode is only supported on ESP32S2 now
else {
host->tx_cnting_sem = xSemaphoreCreateCounting(config->queue_size, config->queue_size);
host->rx_cnting_sem = xSemaphoreCreateCounting(config->queue_size, config->queue_size);
if (!host->tx_cnting_sem || !host->rx_cnting_sem) {
ret = ESP_ERR_NO_MEM;
goto cleanup;
}
}
#endif //#if CONFIG_IDF_TARGET_ESP32S2
//Alloc intr
if (!host->append_mode) {
ret = esp_intr_alloc(spicommon_irqsource_for_host(host_id), 0, spi_slave_hd_intr_segment,
(void *)host, &host->intr);
if (ret != ESP_OK) {
goto cleanup;
}
ret = esp_intr_alloc(spicommon_irqdma_source_for_host(host_id), 0, spi_slave_hd_intr_segment,
(void *)host, &host->intr_dma);
if (ret != ESP_OK) {
goto cleanup;
}
}
#if CONFIG_IDF_TARGET_ESP32S2
//Append mode is only supported on ESP32S2 now
else {
ret = esp_intr_alloc(spicommon_irqsource_for_host(host_id), 0, spi_slave_hd_intr_append,
(void *)host, &host->intr);
if (ret != ESP_OK) {
goto cleanup;
}
ret = esp_intr_alloc(spicommon_irqdma_source_for_host(host_id), 0, spi_slave_hd_intr_append,
(void *)host, &host->intr_dma);
if (ret != ESP_OK) {
goto cleanup;
}
}
#endif //#if CONFIG_IDF_TARGET_ESP32S2
//Init callbacks
memcpy((uint8_t*)&host->callback, (uint8_t*)&config->cb_config, sizeof(spi_slave_hd_callback_config_t));
spi_event_t event = 0;
if (host->callback.cb_buffer_tx!=NULL) event |= SPI_EV_BUF_TX;
if (host->callback.cb_buffer_rx!=NULL) event |= SPI_EV_BUF_RX;
if (host->callback.cb_cmd9!=NULL) event |= SPI_EV_CMD9;
if (host->callback.cb_cmdA!=NULL) event |= SPI_EV_CMDA;
spi_slave_hd_hal_enable_event_intr(&host->hal, event);
return ESP_OK;
cleanup:
// Memory free is in the deinit function
spi_slave_hd_deinit(host_id);
return ret;
}
esp_err_t spi_slave_hd_deinit(spi_host_device_t host_id)
{
spi_slave_hd_slot_t *host = spihost[host_id];
if (host == NULL) return ESP_ERR_INVALID_ARG;
if (host->tx_trans_queue) vQueueDelete(host->tx_trans_queue);
if (host->tx_ret_queue) vQueueDelete(host->tx_ret_queue);
if (host->rx_trans_queue) vQueueDelete(host->rx_trans_queue);
if (host->rx_ret_queue) vQueueDelete(host->rx_ret_queue);
if (host->tx_cnting_sem) vSemaphoreDelete(host->tx_cnting_sem);
if (host->rx_cnting_sem) vSemaphoreDelete(host->rx_cnting_sem);
if (host) {
free(host->hal.dmadesc_tx);
free(host->hal.dmadesc_rx);
esp_intr_free(host->intr);
esp_intr_free(host->intr_dma);
#ifdef CONFIG_PM_ENABLE
if (host->pm_lock) {
esp_pm_lock_release(host->pm_lock);
esp_pm_lock_delete(host->pm_lock);
}
#endif
}
spicommon_periph_free(host_id);
if (host->dma_enabled) {
spicommon_dma_chan_free(host_id);
}
free(host);
spihost[host_id] = NULL;
return ESP_OK;
}
static void tx_invoke(spi_slave_hd_slot_t* host)
{
portENTER_CRITICAL(&host->int_spinlock);
spi_slave_hd_hal_invoke_event_intr(&host->hal, SPI_EV_SEND);
portEXIT_CRITICAL(&host->int_spinlock);
}
static void rx_invoke(spi_slave_hd_slot_t* host)
{
portENTER_CRITICAL(&host->int_spinlock);
spi_slave_hd_hal_invoke_event_intr(&host->hal, SPI_EV_RECV);
portEXIT_CRITICAL(&host->int_spinlock);
}
static inline IRAM_ATTR BaseType_t intr_check_clear_callback(spi_slave_hd_slot_t* host, spi_event_t ev, slave_cb_t cb)
{
BaseType_t cb_awoken = pdFALSE;
if (spi_slave_hd_hal_check_clear_event(&host->hal, ev) && cb) {
spi_slave_hd_event_t event = {.event = ev};
cb(host->callback.arg, &event, &cb_awoken);
}
return cb_awoken;
}
static IRAM_ATTR void spi_slave_hd_intr_segment(void *arg)
{
spi_slave_hd_slot_t *host = (spi_slave_hd_slot_t*)arg;
spi_slave_hd_callback_config_t *callback = &host->callback;
spi_slave_hd_hal_context_t *hal = &host->hal;
BaseType_t awoken = pdFALSE;
BaseType_t ret;
awoken |= intr_check_clear_callback(host, SPI_EV_BUF_TX, callback->cb_buffer_tx);
awoken |= intr_check_clear_callback(host, SPI_EV_BUF_RX, callback->cb_buffer_rx);
awoken |= intr_check_clear_callback(host, SPI_EV_CMD9, callback->cb_cmd9);
awoken |= intr_check_clear_callback(host, SPI_EV_CMDA, callback->cb_cmdA);
bool tx_done = false;
bool rx_done = false;
portENTER_CRITICAL_ISR(&host->int_spinlock);
if (host->tx_desc && spi_slave_hd_hal_check_disable_event(hal, SPI_EV_SEND)) {
tx_done = true;
}
if (host->rx_desc && spi_slave_hd_hal_check_disable_event(hal, SPI_EV_RECV)) {
rx_done = true;
}
portEXIT_CRITICAL_ISR(&host->int_spinlock);
if (tx_done) {
bool ret_queue = true;
if (callback->cb_sent) {
spi_slave_hd_event_t ev = {
.event = SPI_EV_SEND,
.trans = host->tx_desc,
};
BaseType_t cb_awoken = pdFALSE;
ret_queue = callback->cb_sent(callback->arg, &ev, &cb_awoken);
awoken |= cb_awoken;
}
if (ret_queue) {
ret = xQueueSendFromISR(host->tx_ret_queue, &host->tx_desc, &awoken);
// The return queue is full. All the data remian in send_queue + ret_queue should not be more than the queue length.
assert(ret == pdTRUE);
}
host->tx_desc = NULL;
}
if (rx_done) {
bool ret_queue = true;
host->rx_desc->trans_len = spi_slave_hd_hal_rxdma_seg_get_len(hal);
if (callback->cb_recv) {
spi_slave_hd_event_t ev = {
.event = SPI_EV_RECV,
.trans = host->rx_desc,
};
BaseType_t cb_awoken = pdFALSE;
ret_queue = callback->cb_recv(callback->arg, &ev, &cb_awoken);
awoken |= cb_awoken;
}
if (ret_queue) {
ret = xQueueSendFromISR(host->rx_ret_queue, &host->rx_desc, &awoken);
// The return queue is full. All the data remian in send_queue + ret_queue should not be more than the queue length.
assert(ret == pdTRUE);
}
host->rx_desc = NULL;
}
bool tx_sent = false;
bool rx_sent = false;
if (!host->tx_desc) {
ret = xQueueReceiveFromISR(host->tx_trans_queue, &host->tx_desc, &awoken);
if (ret == pdTRUE) {
spi_slave_hd_hal_txdma(hal, host->tx_desc->data, host->tx_desc->len);
tx_sent = true;
if (callback->cb_send_dma_ready) {
spi_slave_hd_event_t ev = {
.event = SPI_EV_SEND_DMA_READY,
.trans = host->tx_desc,
};
BaseType_t cb_awoken = pdFALSE;
callback->cb_send_dma_ready(callback->arg, &ev, &cb_awoken);
awoken |= cb_awoken;
}
}
}
if (!host->rx_desc) {
ret = xQueueReceiveFromISR(host->rx_trans_queue, &host->rx_desc, &awoken);
if (ret == pdTRUE) {
spi_slave_hd_hal_rxdma(hal, host->rx_desc->data, host->rx_desc->len);
rx_sent = true;
if (callback->cb_recv_dma_ready) {
spi_slave_hd_event_t ev = {
.event = SPI_EV_RECV_DMA_READY,
.trans = host->rx_desc,
};
BaseType_t cb_awoken = pdFALSE;
callback->cb_recv_dma_ready(callback->arg, &ev, &cb_awoken);
awoken |= cb_awoken;
}
}
}
portENTER_CRITICAL_ISR(&host->int_spinlock);
if (tx_sent) {
spi_slave_hd_hal_enable_event_intr(hal, SPI_EV_SEND);
}
if (rx_sent) {
spi_slave_hd_hal_enable_event_intr(hal, SPI_EV_RECV);
}
portEXIT_CRITICAL_ISR(&host->int_spinlock);
if (awoken==pdTRUE) portYIELD_FROM_ISR();
}
#if CONFIG_IDF_TARGET_ESP32S2
//Append mode is only supported on ESP32S2 now
static IRAM_ATTR void spi_slave_hd_intr_append(void *arg)
{
spi_slave_hd_slot_t *host = (spi_slave_hd_slot_t*)arg;
spi_slave_hd_callback_config_t *callback = &host->callback;
spi_slave_hd_hal_context_t *hal = &host->hal;
BaseType_t awoken = pdFALSE;
BaseType_t ret __attribute__((unused));
bool tx_done = false;
bool rx_done = false;
portENTER_CRITICAL_ISR(&host->int_spinlock);
if (spi_slave_hd_hal_check_clear_event(hal, SPI_EV_SEND)) {
tx_done = true;
}
if (spi_slave_hd_hal_check_clear_event(hal, SPI_EV_RECV)) {
rx_done = true;
}
portEXIT_CRITICAL_ISR(&host->int_spinlock);
if (tx_done) {
spi_slave_hd_data_t *trans_desc;
while (1) {
bool trans_finish = false;
trans_finish = spi_slave_hd_hal_get_tx_finished_trans(hal, (void **)&trans_desc);
if (!trans_finish) {
break;
}
bool ret_queue = true;
if (callback->cb_sent) {
spi_slave_hd_event_t ev = {
.event = SPI_EV_SEND,
.trans = trans_desc,
};
BaseType_t cb_awoken = pdFALSE;
ret_queue = callback->cb_sent(callback->arg, &ev, &cb_awoken);
awoken |= cb_awoken;
}
if (ret_queue) {
ret = xQueueSendFromISR(host->tx_ret_queue, &trans_desc, &awoken);
assert(ret == pdTRUE);
ret = xSemaphoreGiveFromISR(host->tx_cnting_sem, &awoken);
assert(ret == pdTRUE);
}
}
}
if (rx_done) {
spi_slave_hd_data_t *trans_desc;
size_t trans_len;
while (1) {
bool trans_finish = false;
trans_finish = spi_slave_hd_hal_get_rx_finished_trans(hal, (void **)&trans_desc, &trans_len);
if (!trans_finish) {
break;
}
trans_desc->trans_len = trans_len;
bool ret_queue = true;
if (callback->cb_recv) {
spi_slave_hd_event_t ev = {
.event = SPI_EV_RECV,
.trans = trans_desc,
};
BaseType_t cb_awoken = pdFALSE;
ret_queue = callback->cb_recv(callback->arg, &ev, &cb_awoken);
awoken |= cb_awoken;
}
if (ret_queue) {
ret = xQueueSendFromISR(host->rx_ret_queue, &trans_desc, &awoken);
assert(ret == pdTRUE);
ret = xSemaphoreGiveFromISR(host->rx_cnting_sem, &awoken);
assert(ret == pdTRUE);
}
}
}
if (awoken==pdTRUE) portYIELD_FROM_ISR();
}
#endif //#if CONFIG_IDF_TARGET_ESP32S2
static esp_err_t get_ret_queue_result(spi_host_device_t host_id, spi_slave_chan_t chan, spi_slave_hd_data_t **out_trans, TickType_t timeout)
{
spi_slave_hd_slot_t *host = spihost[host_id];
spi_slave_hd_data_t *trans;
BaseType_t ret;
if (chan == SPI_SLAVE_CHAN_TX) {
ret = xQueueReceive(host->tx_ret_queue, &trans, timeout);
} else {
ret = xQueueReceive(host->rx_ret_queue, &trans, timeout);
}
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
*out_trans = trans;
return ESP_OK;
}
//---------------------------------------------------------Segment Mode Transaction APIs-----------------------------------------------------------//
esp_err_t spi_slave_hd_queue_trans(spi_host_device_t host_id, spi_slave_chan_t chan, spi_slave_hd_data_t* trans, TickType_t timeout)
{
spi_slave_hd_slot_t* host = spihost[host_id];
SPIHD_CHECK(host->append_mode == 0, "This API should be used for SPI Slave HD Segment Mode", ESP_ERR_INVALID_STATE);
SPIHD_CHECK(esp_ptr_dma_capable(trans->data), "The buffer should be DMA capable.", ESP_ERR_INVALID_ARG);
SPIHD_CHECK(trans->len <= host->max_transfer_sz && trans->len > 0, "Invalid buffer size", ESP_ERR_INVALID_ARG);
SPIHD_CHECK(chan == SPI_SLAVE_CHAN_TX || chan == SPI_SLAVE_CHAN_RX, "Invalid channel", ESP_ERR_INVALID_ARG);
if (chan == SPI_SLAVE_CHAN_TX) {
BaseType_t ret = xQueueSend(host->tx_trans_queue, &trans, timeout);
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
tx_invoke(host);
} else { //chan == SPI_SLAVE_CHAN_RX
BaseType_t ret = xQueueSend(host->rx_trans_queue, &trans, timeout);
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
rx_invoke(host);
}
return ESP_OK;
}
esp_err_t spi_slave_hd_get_trans_res(spi_host_device_t host_id, spi_slave_chan_t chan, spi_slave_hd_data_t** out_trans, TickType_t timeout)
{
esp_err_t ret;
spi_slave_hd_slot_t* host = spihost[host_id];
SPIHD_CHECK(host->append_mode == 0, "This API should be used for SPI Slave HD Segment Mode", ESP_ERR_INVALID_STATE);
SPIHD_CHECK(chan == SPI_SLAVE_CHAN_TX || chan == SPI_SLAVE_CHAN_RX, "Invalid channel", ESP_ERR_INVALID_ARG);
ret = get_ret_queue_result(host_id, chan, out_trans, timeout);
return ret;
}
void spi_slave_hd_read_buffer(spi_host_device_t host_id, int addr, uint8_t *out_data, size_t len)
{
spi_slave_hd_hal_read_buffer(&spihost[host_id]->hal, addr, out_data, len);
}
void spi_slave_hd_write_buffer(spi_host_device_t host_id, int addr, uint8_t *data, size_t len)
{
spi_slave_hd_hal_write_buffer(&spihost[host_id]->hal, addr, data, len);
}
#if CONFIG_IDF_TARGET_ESP32S2
//Append mode is only supported on ESP32S2 now
//---------------------------------------------------------Append Mode Transaction APIs-----------------------------------------------------------//
esp_err_t spi_slave_hd_append_trans(spi_host_device_t host_id, spi_slave_chan_t chan, spi_slave_hd_data_t *trans, TickType_t timeout)
{
esp_err_t err;
spi_slave_hd_slot_t *host = spihost[host_id];
spi_slave_hd_hal_context_t *hal = &host->hal;
SPIHD_CHECK(trans->len <= SPI_MAX_DMA_LEN, "Currently we only support transaction with data length within 4092 bytes", ESP_ERR_INVALID_ARG);
SPIHD_CHECK(host->append_mode == 1, "This API should be used for SPI Slave HD Append Mode", ESP_ERR_INVALID_STATE);
SPIHD_CHECK(esp_ptr_dma_capable(trans->data), "The buffer should be DMA capable.", ESP_ERR_INVALID_ARG);
SPIHD_CHECK(trans->len <= host->max_transfer_sz && trans->len > 0, "Invalid buffer size", ESP_ERR_INVALID_ARG);
SPIHD_CHECK(chan == SPI_SLAVE_CHAN_TX || chan == SPI_SLAVE_CHAN_RX, "Invalid channel", ESP_ERR_INVALID_ARG);
if (chan == SPI_SLAVE_CHAN_TX) {
BaseType_t ret = xSemaphoreTake(host->tx_cnting_sem, timeout);
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
err = spi_slave_hd_hal_txdma_append(hal, trans->data, trans->len, trans);
} else {
BaseType_t ret = xSemaphoreTake(host->rx_cnting_sem, timeout);
if (ret == pdFALSE) {
return ESP_ERR_TIMEOUT;
}
err = spi_slave_hd_hal_rxdma_append(hal, trans->data, trans->len, trans);
}
if (err != ESP_OK) {
ESP_LOGE(TAG, "Wait until the DMA finishes its transaction");
}
return err;
}
esp_err_t spi_slave_hd_get_append_trans_res(spi_host_device_t host_id, spi_slave_chan_t chan, spi_slave_hd_data_t **out_trans, TickType_t timeout)
{
esp_err_t ret;
spi_slave_hd_slot_t* host = spihost[host_id];
SPIHD_CHECK(host->append_mode == 1, "This API should be used for SPI Slave HD Append Mode", ESP_ERR_INVALID_STATE);
SPIHD_CHECK(chan == SPI_SLAVE_CHAN_TX || chan == SPI_SLAVE_CHAN_RX, "Invalid channel", ESP_ERR_INVALID_ARG);
ret = get_ret_queue_result(host_id, chan, out_trans, timeout);
return ret;
}
#endif //#if CONFIG_IDF_TARGET_ESP32S2