kopia lustrzana https://github.com/espressif/esp-idf
546 wiersze
20 KiB
C
546 wiersze
20 KiB
C
/* LEDC tested by PCNT in some case
|
|
* PCNT can get the LEDC waveform frequency
|
|
*
|
|
* test environment of UT_T1_LEDC:
|
|
* 1. connect GPIO18 with GPIO4
|
|
* 2. connect GPIO5 to 3.3v (in case of it is pulled down by default)
|
|
*
|
|
* some calculation related with duty:
|
|
* real duty = duty/2^duty_resolution
|
|
*/
|
|
#include <esp_types.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <malloc.h>
|
|
#include <string.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "freertos/semphr.h"
|
|
#include "freertos/queue.h"
|
|
#include "freertos/xtensa_api.h"
|
|
#include "unity.h"
|
|
#include "soc/ledc_periph.h"
|
|
#include "esp_system.h"
|
|
#include "driver/pcnt.h"
|
|
#include "driver/ledc.h"
|
|
#include "driver/gpio.h"
|
|
|
|
#define PULSE_IO 18
|
|
#define PCNT_INPUT_IO 4
|
|
#define PCNT_CTRL_FLOATING_IO 5
|
|
#define HIGHEST_LIMIT 10000
|
|
#define LOWEST_LIMIT -10000
|
|
|
|
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
|
|
//no runners
|
|
|
|
// use PCNT to test the waveform of LEDC
|
|
static int16_t wave_count(int last_time)
|
|
{
|
|
int16_t test_counter;
|
|
pcnt_config_t pcnt_config = {
|
|
.pulse_gpio_num = PCNT_INPUT_IO,
|
|
.ctrl_gpio_num = PCNT_CTRL_FLOATING_IO,
|
|
.channel = PCNT_CHANNEL_0,
|
|
.unit = PCNT_UNIT_0,
|
|
.pos_mode = PCNT_COUNT_INC,
|
|
.neg_mode = PCNT_COUNT_DIS,
|
|
.lctrl_mode = PCNT_MODE_REVERSE,
|
|
.hctrl_mode = PCNT_MODE_KEEP,
|
|
.counter_h_lim = HIGHEST_LIMIT,
|
|
.counter_l_lim = LOWEST_LIMIT,
|
|
};
|
|
TEST_ESP_OK(pcnt_unit_config(&pcnt_config));
|
|
|
|
// initialize first
|
|
TEST_ESP_OK(pcnt_counter_pause(PCNT_UNIT_0));
|
|
TEST_ESP_OK(pcnt_counter_clear(PCNT_UNIT_0));
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
TEST_ESP_OK(pcnt_counter_resume(PCNT_UNIT_0));
|
|
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
|
|
|
|
vTaskDelay(last_time / portTICK_RATE_MS);
|
|
TEST_ESP_OK(pcnt_get_counter_value(PCNT_UNIT_0, &test_counter));
|
|
return test_counter;
|
|
}
|
|
|
|
// the PCNT will count the frequency of it
|
|
static void frequency_set_get(ledc_mode_t speed_mode, ledc_timer_t timer, uint32_t freq_hz, int16_t real_freq, int16_t error)
|
|
{
|
|
int16_t count;
|
|
TEST_ESP_OK(ledc_set_freq(speed_mode, timer, freq_hz));
|
|
count = wave_count(1000);
|
|
TEST_ASSERT_INT16_WITHIN(error, count, real_freq);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_freq(speed_mode, timer), real_freq);
|
|
}
|
|
|
|
static void timer_frequency_test(ledc_channel_t channel, ledc_timer_bit_t timer_bit, ledc_timer_t timer, ledc_mode_t speed_mode)
|
|
{
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = speed_mode,
|
|
.channel = channel,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = timer,
|
|
.duty = 4000,
|
|
.hpoint = 0,
|
|
};
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = speed_mode,
|
|
.duty_resolution = timer_bit,
|
|
.timer_num = timer,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 100, 100, 2);
|
|
frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 5000, 5000, 5);
|
|
frequency_set_get(ledc_ch_config.speed_mode, ledc_ch_config.timer_sel, 9000, 9025, 5);
|
|
}
|
|
|
|
static void timer_duty_set_get(ledc_mode_t speed_mode, ledc_channel_t channel, uint32_t duty)
|
|
{
|
|
TEST_ESP_OK(ledc_set_duty(speed_mode, channel, duty));
|
|
TEST_ESP_OK(ledc_update_duty(speed_mode, channel));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_duty(speed_mode, channel), duty);
|
|
}
|
|
|
|
// use logic analyzer to view
|
|
static void timer_duty_test(ledc_channel_t channel, ledc_timer_bit_t timer_bit, ledc_timer_t timer, ledc_mode_t speed_mode)
|
|
{
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = speed_mode,
|
|
.channel = channel,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = timer,
|
|
.duty = 4000,
|
|
.hpoint = 0,
|
|
};
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = speed_mode,
|
|
.duty_resolution = timer_bit,
|
|
.timer_num = timer,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
// duty ratio: (2^duty)/(2^timer_bit)
|
|
timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, 0);
|
|
timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, 1);
|
|
timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, 1 << 12); // 50% duty
|
|
timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, (1 << 13) - 1);
|
|
timer_duty_set_get(ledc_ch_config.speed_mode, ledc_ch_config.channel, (1 << 13) - 2);
|
|
}
|
|
|
|
TEST_CASE("LEDC error log channel and timer config", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
const ledc_mode_t test_speed_mode = LEDC_HIGH_SPEED_MODE;
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
const ledc_mode_t test_speed_mode = LEDC_LOW_SPEED_MODE;
|
|
#endif
|
|
//channel configuration test
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = test_speed_mode,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 4000,
|
|
.hpoint = 0,
|
|
};
|
|
|
|
// basic right parameter test
|
|
ledc_channel_config_t temp_ch_config = ledc_ch_config;
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
|
|
// with wrong GPIO using
|
|
ledc_ch_config.gpio_num = GPIO_NUM_MAX;
|
|
TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
|
|
// with wrong speed
|
|
ledc_ch_config = temp_ch_config;
|
|
ledc_ch_config.speed_mode = LEDC_SPEED_MODE_MAX;
|
|
TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
|
|
|
|
// with wrong channel
|
|
ledc_ch_config = temp_ch_config;
|
|
ledc_ch_config.channel = LEDC_CHANNEL_MAX;
|
|
TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
|
|
|
|
// with wrong interruption type
|
|
ledc_ch_config = temp_ch_config;
|
|
ledc_ch_config.intr_type = 2;
|
|
TEST_ASSERT_FALSE((void *)ledc_channel_config(&ledc_ch_config));
|
|
|
|
// with wrong timer
|
|
ledc_ch_config = temp_ch_config;
|
|
ledc_ch_config.timer_sel = 4;
|
|
TEST_ASSERT(ledc_channel_config(&ledc_ch_config) == ESP_ERR_INVALID_ARG);
|
|
|
|
ledc_ch_config = temp_ch_config;
|
|
ledc_ch_config.duty = 12000;
|
|
TEST_ASSERT_FALSE((void *)ledc_channel_config(&ledc_ch_config));
|
|
|
|
// timer configuration test
|
|
ledc_timer_config_t ledc_time_config;
|
|
ledc_time_config.speed_mode = test_speed_mode;
|
|
ledc_time_config.duty_resolution = LEDC_TIMER_13_BIT;
|
|
ledc_time_config.timer_num = LEDC_TIMER_0;
|
|
ledc_time_config.freq_hz = 5000;
|
|
ledc_time_config.clk_cfg = LEDC_USE_APB_CLK;
|
|
|
|
ledc_timer_config_t temp_timer_config = ledc_time_config;
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
ledc_time_config.speed_mode = LEDC_SPEED_MODE_MAX;
|
|
TEST_ASSERT(ledc_timer_config(&ledc_time_config) == ESP_ERR_INVALID_ARG);
|
|
|
|
// wrong duty_resolution
|
|
ledc_time_config = temp_timer_config;
|
|
ledc_time_config.duty_resolution = LEDC_TIMER_BIT_MAX;
|
|
TEST_ASSERT(ledc_timer_config(&ledc_time_config) == ESP_ERR_INVALID_ARG);
|
|
|
|
// wrong timer
|
|
ledc_time_config = temp_timer_config;
|
|
ledc_time_config.timer_num = 4;
|
|
TEST_ASSERT(ledc_timer_config(&ledc_time_config) == ESP_ERR_INVALID_ARG);
|
|
|
|
uint32_t current_level = LEDC.channel_group[test_speed_mode].channel[LEDC_CHANNEL_0].conf0.idle_lv;
|
|
TEST_ESP_OK(ledc_stop(test_speed_mode, LEDC_CHANNEL_0, !current_level));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32( LEDC.channel_group[test_speed_mode].channel[LEDC_CHANNEL_0].conf0.idle_lv, !current_level);
|
|
}
|
|
|
|
TEST_CASE("LEDC normal channel and timer config", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 4000,
|
|
.hpoint = 0,
|
|
};
|
|
ledc_channel_config_t temp_ch_config = ledc_ch_config;
|
|
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.duty_resolution = LEDC_TIMER_13_BIT,
|
|
.timer_num = LEDC_TIMER_0,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
ledc_timer_config_t temp_time_config = ledc_time_config;
|
|
|
|
// use all kinds of speed mode, channel, timer combination to test all of possible configuration
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
ledc_mode_t speed_mode[LEDC_SPEED_MODE_MAX] = {LEDC_HIGH_SPEED_MODE, LEDC_LOW_SPEED_MODE};
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
ledc_mode_t speed_mode[LEDC_SPEED_MODE_MAX] = {LEDC_LOW_SPEED_MODE};
|
|
#endif
|
|
ledc_channel_t channel_type[8] = {LEDC_CHANNEL_0, LEDC_CHANNEL_1, LEDC_CHANNEL_2, LEDC_CHANNEL_3, LEDC_CHANNEL_4, LEDC_CHANNEL_5, LEDC_CHANNEL_6, LEDC_CHANNEL_7};
|
|
ledc_timer_t timer_select[4] = {LEDC_TIMER_0, LEDC_TIMER_1, LEDC_TIMER_2, LEDC_TIMER_3};
|
|
|
|
for (int i = 0; i < LEDC_SPEED_MODE_MAX; i++) {
|
|
ledc_ch_config.speed_mode = speed_mode[i];
|
|
ledc_time_config.speed_mode = speed_mode[i];
|
|
for (int j = 0; j < 8; j++) {
|
|
ledc_ch_config.channel = channel_type[j];
|
|
for (int k = 0; k < 4; k++) {
|
|
ledc_ch_config.timer_sel = timer_select[k];
|
|
ledc_time_config.timer_num = timer_select[k];
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
ledc_ch_config = temp_ch_config;
|
|
ledc_time_config = temp_time_config;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
// set it ignore: need to debug
|
|
TEST_CASE("LEDC set and get frequency", "[ledc][test_env=UT_T1_LEDC][timeout=60][ignore]")
|
|
{
|
|
#if !TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_0, LEDC_HIGH_SPEED_MODE);
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_1, LEDC_HIGH_SPEED_MODE);
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_2, LEDC_HIGH_SPEED_MODE);
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_3, LEDC_HIGH_SPEED_MODE);
|
|
#endif
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_0, LEDC_LOW_SPEED_MODE);
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_1, LEDC_LOW_SPEED_MODE);
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_2, LEDC_LOW_SPEED_MODE);
|
|
timer_frequency_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, LEDC_TIMER_3, LEDC_LOW_SPEED_MODE);
|
|
}
|
|
|
|
// the duty need to be detected by waveform given by the logic analyzer
|
|
// can't get it directly, so set it "ignore"
|
|
TEST_CASE("LEDC set and get dut(with logic analyzer)", "[ledc][ignore]")
|
|
{
|
|
ledc_timer_t timer_list[4] = {LEDC_TIMER_0, LEDC_TIMER_1, LEDC_TIMER_2, LEDC_TIMER_3};
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
ledc_mode_t speed_mode_list[LEDC_SPEED_MODE_MAX] = {LEDC_HIGH_SPEED_MODE, LEDC_LOW_SPEED_MODE};
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
ledc_mode_t speed_mode_list[LEDC_SPEED_MODE_MAX] = {LEDC_LOW_SPEED_MODE};
|
|
#endif
|
|
for(int i=0; i<LEDC_TIMER_MAX-1; i++) {
|
|
for(int j=0; j<LEDC_SPEED_MODE_MAX; j++) {
|
|
timer_duty_test(LEDC_CHANNEL_0, LEDC_TIMER_13_BIT, timer_list[i], speed_mode_list[j]);
|
|
}
|
|
}
|
|
}
|
|
|
|
TEST_CASE("LEDC timer set", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
const ledc_mode_t test_speed_mode = LEDC_HIGH_SPEED_MODE;
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
const ledc_mode_t test_speed_mode = LEDC_LOW_SPEED_MODE;
|
|
#endif
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = test_speed_mode,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 800,
|
|
.hpoint = 0,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = test_speed_mode,
|
|
.duty_resolution = 13,
|
|
.timer_num = LEDC_TIMER_0,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
uint32_t freq_get;
|
|
uint32_t count;
|
|
//set timer 0 as 250Hz, use REF_TICK
|
|
TEST_ESP_OK(ledc_timer_set(test_speed_mode, LEDC_TIMER_0, 1000, 10, LEDC_REF_TICK));
|
|
TEST_ESP_OK(ledc_timer_rst(test_speed_mode, LEDC_TIMER_0));
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_freq(test_speed_mode, LEDC_TIMER_0), 250);
|
|
freq_get = ledc_get_freq(test_speed_mode, LEDC_TIMER_0);
|
|
count = wave_count(1000);
|
|
TEST_ASSERT_UINT32_WITHIN(10, count, freq_get);
|
|
|
|
//set timer 3 as 500Hz, use APB_CLK
|
|
TEST_ESP_OK(ledc_timer_set(test_speed_mode, LEDC_TIMER_0, 5000, 13, LEDC_APB_CLK));
|
|
TEST_ESP_OK(ledc_timer_rst(test_speed_mode, LEDC_TIMER_0));
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_freq(test_speed_mode, LEDC_TIMER_0), 500);
|
|
freq_get = ledc_get_freq(test_speed_mode, LEDC_TIMER_0);
|
|
count = wave_count(1000);
|
|
TEST_ASSERT_UINT32_WITHIN(50, count, freq_get);
|
|
|
|
printf("Bind channel 0 to timer 0\n");
|
|
TEST_ESP_OK(ledc_bind_channel_timer(test_speed_mode, LEDC_CHANNEL_0, LEDC_TIMER_0));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_freq(test_speed_mode, LEDC_TIMER_0), 500);
|
|
|
|
uint32_t current_level = LEDC.channel_group[test_speed_mode].channel[LEDC_CHANNEL_0].conf0.idle_lv;
|
|
TEST_ESP_OK(ledc_stop(test_speed_mode, LEDC_CHANNEL_0, !current_level));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32( LEDC.channel_group[test_speed_mode].channel[LEDC_CHANNEL_0].conf0.idle_lv, !current_level);
|
|
}
|
|
|
|
TEST_CASE("LEDC timer pause and resume", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
const ledc_mode_t test_speed_mode = LEDC_HIGH_SPEED_MODE;
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
const ledc_mode_t test_speed_mode = LEDC_LOW_SPEED_MODE;
|
|
#endif
|
|
int16_t count;
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = test_speed_mode,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 4000,
|
|
.hpoint = 0,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = test_speed_mode,
|
|
.duty_resolution = LEDC_TIMER_13_BIT,
|
|
.timer_num = LEDC_TIMER_0,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
count = wave_count(1000);
|
|
TEST_ASSERT_INT16_WITHIN(5, count, 5000);
|
|
|
|
//pause ledc timer, when pause it, will get no waveform count
|
|
printf("Pause ledc timer\n");
|
|
TEST_ESP_OK(ledc_timer_pause(test_speed_mode, LEDC_TIMER_0));
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
count = wave_count(1000);
|
|
TEST_ASSERT_INT16_WITHIN(5, count, 0);
|
|
TEST_ASSERT_EQUAL_UINT32(count, 0);
|
|
|
|
//resume ledc timer
|
|
printf("Resume ledc timer\n");
|
|
TEST_ESP_OK(ledc_timer_resume(test_speed_mode, LEDC_TIMER_0));
|
|
vTaskDelay(10 / portTICK_RATE_MS);
|
|
count = wave_count(1000);
|
|
TEST_ASSERT_UINT32_WITHIN(5, count, 5000);
|
|
|
|
//reset ledc timer
|
|
printf("reset ledc timer\n");
|
|
TEST_ESP_OK(ledc_timer_rst(test_speed_mode, LEDC_TIMER_0));
|
|
vTaskDelay(100 / portTICK_RATE_MS);
|
|
TEST_ASSERT_UINT32_WITHIN(5, count, 5000);
|
|
}
|
|
|
|
TEST_CASE("LEDC fade with time(logic analyzer)", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
#ifdef CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
|
|
return;
|
|
#endif
|
|
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
const ledc_mode_t test_speed_mode = LEDC_HIGH_SPEED_MODE;
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
const ledc_mode_t test_speed_mode = LEDC_LOW_SPEED_MODE;
|
|
#endif
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = test_speed_mode,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 0,
|
|
.hpoint = 0,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = test_speed_mode,
|
|
.duty_resolution = LEDC_TIMER_13_BIT,
|
|
.timer_num = LEDC_TIMER_0,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
//initialize fade service
|
|
TEST_ESP_OK(ledc_fade_func_install(0));
|
|
|
|
TEST_ESP_OK(ledc_set_fade_with_time(test_speed_mode, LEDC_CHANNEL_0, 4000, 1000));
|
|
TEST_ESP_OK(ledc_fade_start(test_speed_mode, LEDC_CHANNEL_0, LEDC_FADE_WAIT_DONE));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_duty(test_speed_mode, LEDC_CHANNEL_0), 4000);
|
|
|
|
TEST_ESP_OK(ledc_set_fade_with_time(test_speed_mode, LEDC_CHANNEL_0, 0, 1000));
|
|
TEST_ESP_OK(ledc_fade_start(test_speed_mode, LEDC_CHANNEL_0, LEDC_FADE_NO_WAIT));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_duty(test_speed_mode, LEDC_CHANNEL_0), 0);
|
|
|
|
//deinitial fade service
|
|
ledc_fade_func_uninstall();
|
|
}
|
|
|
|
TEST_CASE("LEDC fade with step(logic analyzer)", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
#ifdef CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE
|
|
return;
|
|
#endif
|
|
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
const ledc_mode_t test_speed_mode = LEDC_HIGH_SPEED_MODE;
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
const ledc_mode_t test_speed_mode = LEDC_LOW_SPEED_MODE;
|
|
#endif
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = test_speed_mode,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 0,
|
|
.hpoint = 0,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = test_speed_mode,
|
|
.duty_resolution = LEDC_TIMER_13_BIT,
|
|
.timer_num = LEDC_TIMER_0,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
//initialize fade service.
|
|
TEST_ESP_OK(ledc_fade_func_install(0));
|
|
|
|
TEST_ESP_OK(ledc_set_fade_with_step(test_speed_mode, LEDC_CHANNEL_0, 4000, 2, 1));
|
|
TEST_ESP_OK(ledc_fade_start(test_speed_mode, LEDC_CHANNEL_0, LEDC_FADE_WAIT_DONE));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_duty(test_speed_mode, LEDC_CHANNEL_0), 4000);
|
|
|
|
TEST_ESP_OK(ledc_set_fade_with_step(test_speed_mode, LEDC_CHANNEL_0, 0, 4, 2));
|
|
TEST_ESP_OK(ledc_fade_start(test_speed_mode, LEDC_CHANNEL_0, LEDC_FADE_NO_WAIT));
|
|
vTaskDelay(1000 / portTICK_RATE_MS);
|
|
TEST_ASSERT_EQUAL_INT32(ledc_get_duty(test_speed_mode, LEDC_CHANNEL_0), 0);
|
|
|
|
//scaler=0 check
|
|
TEST_ASSERT(ledc_set_fade_with_step(test_speed_mode, LEDC_CHANNEL_0, 4000, 0, 1) == ESP_ERR_INVALID_ARG);
|
|
|
|
//deinitial fade service
|
|
ledc_fade_func_uninstall();
|
|
}
|
|
|
|
// memory leaking problem detecting
|
|
TEST_CASE("LEDC memory test", "[ledc][test_env=UT_T1_LEDC]")
|
|
{
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
const ledc_mode_t test_speed_mode = LEDC_HIGH_SPEED_MODE;
|
|
#elif defined CONFIG_IDF_TARGET_ESP32S2
|
|
const ledc_mode_t test_speed_mode = LEDC_LOW_SPEED_MODE;
|
|
#endif
|
|
ledc_channel_config_t ledc_ch_config = {
|
|
.gpio_num = PULSE_IO,
|
|
.speed_mode = test_speed_mode,
|
|
.channel = LEDC_CHANNEL_0,
|
|
.intr_type = LEDC_INTR_DISABLE,
|
|
.timer_sel = LEDC_TIMER_0,
|
|
.duty = 0,
|
|
.hpoint = 0,
|
|
};
|
|
TEST_ESP_OK(ledc_channel_config(&ledc_ch_config));
|
|
|
|
ledc_timer_config_t ledc_time_config = {
|
|
.speed_mode = test_speed_mode,
|
|
.duty_resolution = LEDC_TIMER_13_BIT,
|
|
.timer_num = LEDC_TIMER_0,
|
|
.freq_hz = 5000,
|
|
.clk_cfg = LEDC_USE_APB_CLK,
|
|
};
|
|
TEST_ESP_OK(ledc_timer_config(&ledc_time_config));
|
|
|
|
uint32_t size = esp_get_free_heap_size();
|
|
uint32_t i;
|
|
|
|
// install and uninstall for 1000 times to test whether memory leaking exists
|
|
for (i = 0; i <= 1000; i++) {
|
|
TEST_ESP_OK(ledc_fade_func_install(0));
|
|
ledc_fade_func_uninstall();
|
|
}
|
|
TEST_ASSERT_INT32_WITHIN(100, size, esp_get_free_heap_size());
|
|
TEST_ESP_OK(ledc_stop(test_speed_mode, LEDC_CHANNEL_0, 0));
|
|
}
|
|
|
|
#endif //!TEMPORARY_DISABLED_FOR_TARGETS(ESP32S2)
|