kopia lustrzana https://github.com/espressif/esp-idf
323 wiersze
18 KiB
C
323 wiersze
18 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include "sdkconfig.h"
|
|
#include "esp_attr.h"
|
|
#include "esp_bit_defs.h"
|
|
#include "soc/soc_caps.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/** Touch pad channel */
|
|
typedef enum {
|
|
TOUCH_PAD_NUM0 = 0, /*!< Touch pad channel 0 is GPIO4(ESP32) */
|
|
TOUCH_PAD_NUM1, /*!< Touch pad channel 1 is GPIO0(ESP32) / GPIO1(ESP32-S2) */
|
|
TOUCH_PAD_NUM2, /*!< Touch pad channel 2 is GPIO2(ESP32) / GPIO2(ESP32-S2) */
|
|
TOUCH_PAD_NUM3, /*!< Touch pad channel 3 is GPIO15(ESP32) / GPIO3(ESP32-S2) */
|
|
TOUCH_PAD_NUM4, /*!< Touch pad channel 4 is GPIO13(ESP32) / GPIO4(ESP32-S2) */
|
|
TOUCH_PAD_NUM5, /*!< Touch pad channel 5 is GPIO12(ESP32) / GPIO5(ESP32-S2) */
|
|
TOUCH_PAD_NUM6, /*!< Touch pad channel 6 is GPIO14(ESP32) / GPIO6(ESP32-S2) */
|
|
TOUCH_PAD_NUM7, /*!< Touch pad channel 7 is GPIO27(ESP32) / GPIO7(ESP32-S2) */
|
|
TOUCH_PAD_NUM8, /*!< Touch pad channel 8 is GPIO33(ESP32) / GPIO8(ESP32-S2) */
|
|
TOUCH_PAD_NUM9, /*!< Touch pad channel 9 is GPIO32(ESP32) / GPIO9(ESP32-S2) */
|
|
#if SOC_TOUCH_SENSOR_NUM > 10
|
|
TOUCH_PAD_NUM10, /*!< Touch channel 10 is GPIO10(ESP32-S2) */
|
|
TOUCH_PAD_NUM11, /*!< Touch channel 11 is GPIO11(ESP32-S2) */
|
|
TOUCH_PAD_NUM12, /*!< Touch channel 12 is GPIO12(ESP32-S2) */
|
|
TOUCH_PAD_NUM13, /*!< Touch channel 13 is GPIO13(ESP32-S2) */
|
|
TOUCH_PAD_NUM14, /*!< Touch channel 14 is GPIO14(ESP32-S2) */
|
|
#endif
|
|
TOUCH_PAD_MAX,
|
|
} touch_pad_t;
|
|
|
|
/** Touch sensor high reference voltage */
|
|
typedef enum {
|
|
TOUCH_HVOLT_KEEP = -1, /*!<Touch sensor high reference voltage, no change */
|
|
TOUCH_HVOLT_2V4 = 0, /*!<Touch sensor high reference voltage, 2.4V */
|
|
TOUCH_HVOLT_2V5, /*!<Touch sensor high reference voltage, 2.5V */
|
|
TOUCH_HVOLT_2V6, /*!<Touch sensor high reference voltage, 2.6V */
|
|
TOUCH_HVOLT_2V7, /*!<Touch sensor high reference voltage, 2.7V */
|
|
TOUCH_HVOLT_MAX,
|
|
} touch_high_volt_t;
|
|
|
|
/** Touch sensor low reference voltage */
|
|
typedef enum {
|
|
TOUCH_LVOLT_KEEP = -1, /*!<Touch sensor low reference voltage, no change */
|
|
TOUCH_LVOLT_0V5 = 0, /*!<Touch sensor low reference voltage, 0.5V */
|
|
TOUCH_LVOLT_0V6, /*!<Touch sensor low reference voltage, 0.6V */
|
|
TOUCH_LVOLT_0V7, /*!<Touch sensor low reference voltage, 0.7V */
|
|
TOUCH_LVOLT_0V8, /*!<Touch sensor low reference voltage, 0.8V */
|
|
TOUCH_LVOLT_MAX,
|
|
} touch_low_volt_t;
|
|
|
|
/** Touch sensor high reference voltage attenuation */
|
|
typedef enum {
|
|
TOUCH_HVOLT_ATTEN_KEEP = -1, /*!<Touch sensor high reference voltage attenuation, no change */
|
|
TOUCH_HVOLT_ATTEN_1V5 = 0, /*!<Touch sensor high reference voltage attenuation, 1.5V attenuation */
|
|
TOUCH_HVOLT_ATTEN_1V, /*!<Touch sensor high reference voltage attenuation, 1.0V attenuation */
|
|
TOUCH_HVOLT_ATTEN_0V5, /*!<Touch sensor high reference voltage attenuation, 0.5V attenuation */
|
|
TOUCH_HVOLT_ATTEN_0V, /*!<Touch sensor high reference voltage attenuation, 0V attenuation */
|
|
TOUCH_HVOLT_ATTEN_MAX,
|
|
} touch_volt_atten_t;
|
|
|
|
/** Touch sensor charge/discharge speed */
|
|
typedef enum {
|
|
TOUCH_PAD_SLOPE_0 = 0, /*!<Touch sensor charge / discharge speed, always zero */
|
|
TOUCH_PAD_SLOPE_1 = 1, /*!<Touch sensor charge / discharge speed, slowest */
|
|
TOUCH_PAD_SLOPE_2 = 2, /*!<Touch sensor charge / discharge speed */
|
|
TOUCH_PAD_SLOPE_3 = 3, /*!<Touch sensor charge / discharge speed */
|
|
TOUCH_PAD_SLOPE_4 = 4, /*!<Touch sensor charge / discharge speed */
|
|
TOUCH_PAD_SLOPE_5 = 5, /*!<Touch sensor charge / discharge speed */
|
|
TOUCH_PAD_SLOPE_6 = 6, /*!<Touch sensor charge / discharge speed */
|
|
TOUCH_PAD_SLOPE_7 = 7, /*!<Touch sensor charge / discharge speed, fast */
|
|
TOUCH_PAD_SLOPE_MAX,
|
|
} touch_cnt_slope_t;
|
|
|
|
/** Touch sensor initial charge level */
|
|
typedef enum {
|
|
TOUCH_PAD_TIE_OPT_LOW = 0, /*!<Initial level of charging voltage, low level */
|
|
TOUCH_PAD_TIE_OPT_HIGH = 1, /*!<Initial level of charging voltage, high level */
|
|
TOUCH_PAD_TIE_OPT_MAX,
|
|
} touch_tie_opt_t;
|
|
|
|
/** Touch sensor FSM mode */
|
|
typedef enum {
|
|
TOUCH_FSM_MODE_TIMER = 0, /*!<To start touch FSM by timer */
|
|
TOUCH_FSM_MODE_SW, /*!<To start touch FSM by software trigger */
|
|
TOUCH_FSM_MODE_MAX,
|
|
} touch_fsm_mode_t;
|
|
|
|
/**** ESP32 Only *****/
|
|
|
|
typedef enum {
|
|
TOUCH_TRIGGER_BELOW = 0, /*!<Touch interrupt will happen if counter value is less than threshold.*/
|
|
TOUCH_TRIGGER_ABOVE = 1, /*!<Touch interrupt will happen if counter value is larger than threshold.*/
|
|
TOUCH_TRIGGER_MAX,
|
|
} touch_trigger_mode_t;
|
|
|
|
typedef enum {
|
|
TOUCH_TRIGGER_SOURCE_BOTH = 0, /*!< wakeup interrupt is generated if both SET1 and SET2 are "touched"*/
|
|
TOUCH_TRIGGER_SOURCE_SET1 = 1, /*!< wakeup interrupt is generated if SET1 is "touched"*/
|
|
TOUCH_TRIGGER_SOURCE_MAX,
|
|
} touch_trigger_src_t;
|
|
|
|
/********************************/
|
|
#define TOUCH_PAD_BIT_MASK_ALL ((1<<SOC_TOUCH_SENSOR_NUM)-1)
|
|
#define TOUCH_PAD_SLOPE_DEFAULT (TOUCH_PAD_SLOPE_7)
|
|
#define TOUCH_PAD_TIE_OPT_DEFAULT (TOUCH_PAD_TIE_OPT_LOW)
|
|
#define TOUCH_PAD_BIT_MASK_MAX (TOUCH_PAD_BIT_MASK_ALL)
|
|
#define TOUCH_PAD_HIGH_VOLTAGE_THRESHOLD (TOUCH_HVOLT_2V7)
|
|
#define TOUCH_PAD_LOW_VOLTAGE_THRESHOLD (TOUCH_LVOLT_0V5)
|
|
#define TOUCH_PAD_ATTEN_VOLTAGE_THRESHOLD (TOUCH_HVOLT_ATTEN_0V5)
|
|
#define TOUCH_PAD_IDLE_CH_CONNECT_DEFAULT (TOUCH_PAD_CONN_GND)
|
|
#if SOC_TOUCH_SENSOR_VERSION == 1
|
|
#define TOUCH_PAD_THRESHOLD_MAX (0) /*!< If set touch threshold max value, The touch sensor can't be in touched status */
|
|
#elif SOC_TOUCH_SENSOR_VERSION == 2
|
|
#define TOUCH_PAD_THRESHOLD_MAX (0x1FFFFF) /*!< If set touch threshold max value, The touch sensor can't be in touched status */
|
|
#elif SOC_TOUCH_SENSOR_VERSION == 3
|
|
#define TOUCH_PAD_THRESHOLD_MAX (0xFFFF) /*!< If set touch threshold max value, The touch sensor can't be in touched status */
|
|
#endif
|
|
|
|
#ifdef CONFIG_IDF_TARGET_ESP32
|
|
|
|
#define TOUCH_PAD_SLEEP_CYCLE_DEFAULT (0x1000) /*!<The timer frequency is RTC_SLOW_CLK (can be 150k or 32k depending on the options), max value is 0xffff */
|
|
#define TOUCH_PAD_MEASURE_CYCLE_DEFAULT (0x7fff) /*!<The timer frequency is 8Mhz, the max value is 0x7fff */
|
|
#define TOUCH_FSM_MODE_DEFAULT (TOUCH_FSM_MODE_SW) /*!<The touch FSM my be started by the software or timer */
|
|
#define TOUCH_TRIGGER_MODE_DEFAULT (TOUCH_TRIGGER_BELOW) /*!<Interrupts can be triggered if sensor value gets below or above threshold */
|
|
#define TOUCH_TRIGGER_SOURCE_DEFAULT (TOUCH_TRIGGER_SOURCE_SET1) /*!<The wakeup trigger source can be SET1 or both SET1 and SET2 */
|
|
|
|
#endif // CONFIG_IDF_TARGET ESP32
|
|
|
|
#if !CONFIG_IDF_TARGET_ESP32
|
|
/**
|
|
* Excessive total time will slow down the touch response.
|
|
* Too small measurement time will not be sampled enough, resulting in inaccurate measurements.
|
|
*
|
|
* @note The greater the duty cycle of the measurement time, the more system power is consumed.
|
|
*/
|
|
#define TOUCH_PAD_SLEEP_CYCLE_DEFAULT (0xf) /*!<The number of sleep cycle in each measure process of touch channels.
|
|
The timer frequency is RTC_SLOW_CLK (can be 150k or 32k depending on the options).
|
|
Range: 0 ~ 0xffff */
|
|
#define TOUCH_PAD_MEASURE_CYCLE_DEFAULT (500) /*!<The times of charge and discharge in each measure process of touch channels.
|
|
The timer frequency is 8Mhz.
|
|
Recommended typical value: Modify this value to make the measurement time around 1ms.
|
|
Range: 0 ~ 0xffff */
|
|
|
|
// TODO: replace by ll macro
|
|
typedef enum {
|
|
TOUCH_PAD_INTR_MASK_DONE = BIT(0), /*!<Measurement done for one of the enabled channels. */
|
|
TOUCH_PAD_INTR_MASK_ACTIVE = BIT(1), /*!<Active for one of the enabled channels. */
|
|
TOUCH_PAD_INTR_MASK_INACTIVE = BIT(2), /*!<Inactive for one of the enabled channels. */
|
|
TOUCH_PAD_INTR_MASK_SCAN_DONE = BIT(3), /*!<Measurement done for all the enabled channels. */
|
|
TOUCH_PAD_INTR_MASK_TIMEOUT = BIT(4), /*!<Timeout for one of the enabled channels. */
|
|
#if SOC_TOUCH_PROXIMITY_MEAS_DONE_SUPPORTED
|
|
TOUCH_PAD_INTR_MASK_PROXI_MEAS_DONE = BIT(5), /*!<For proximity sensor, when the number of measurements reaches the set count of measurements, an interrupt will be generated. */
|
|
TOUCH_PAD_INTR_MASK_MAX
|
|
#define TOUCH_PAD_INTR_MASK_ALL (TOUCH_PAD_INTR_MASK_TIMEOUT \
|
|
| TOUCH_PAD_INTR_MASK_SCAN_DONE \
|
|
| TOUCH_PAD_INTR_MASK_INACTIVE \
|
|
| TOUCH_PAD_INTR_MASK_ACTIVE \
|
|
| TOUCH_PAD_INTR_MASK_DONE \
|
|
| TOUCH_PAD_INTR_MASK_PROXI_MEAS_DONE) /*!<All touch interrupt type enable. */
|
|
#else
|
|
TOUCH_PAD_INTR_MASK_MAX
|
|
#define TOUCH_PAD_INTR_MASK_ALL (TOUCH_PAD_INTR_MASK_TIMEOUT \
|
|
| TOUCH_PAD_INTR_MASK_SCAN_DONE \
|
|
| TOUCH_PAD_INTR_MASK_INACTIVE \
|
|
| TOUCH_PAD_INTR_MASK_ACTIVE \
|
|
| TOUCH_PAD_INTR_MASK_DONE) /*!<All touch interrupt type enable. */
|
|
#endif
|
|
} touch_pad_intr_mask_t;
|
|
|
|
typedef enum {
|
|
TOUCH_PAD_DENOISE_BIT12 = 0, /*!<Denoise range is 12bit */
|
|
TOUCH_PAD_DENOISE_BIT10 = 1, /*!<Denoise range is 10bit */
|
|
TOUCH_PAD_DENOISE_BIT8 = 2, /*!<Denoise range is 8bit */
|
|
TOUCH_PAD_DENOISE_BIT4 = 3, /*!<Denoise range is 4bit */
|
|
TOUCH_PAD_DENOISE_MAX
|
|
} touch_pad_denoise_grade_t;
|
|
|
|
typedef enum {
|
|
TOUCH_PAD_DENOISE_CAP_L0 = 0, /*!<Denoise channel internal reference capacitance is 5pf */
|
|
TOUCH_PAD_DENOISE_CAP_L1 = 1, /*!<Denoise channel internal reference capacitance is 6.4pf */
|
|
TOUCH_PAD_DENOISE_CAP_L2 = 2, /*!<Denoise channel internal reference capacitance is 7.8pf */
|
|
TOUCH_PAD_DENOISE_CAP_L3 = 3, /*!<Denoise channel internal reference capacitance is 9.2pf */
|
|
TOUCH_PAD_DENOISE_CAP_L4 = 4, /*!<Denoise channel internal reference capacitance is 10.6pf */
|
|
TOUCH_PAD_DENOISE_CAP_L5 = 5, /*!<Denoise channel internal reference capacitance is 12.0pf */
|
|
TOUCH_PAD_DENOISE_CAP_L6 = 6, /*!<Denoise channel internal reference capacitance is 13.4pf */
|
|
TOUCH_PAD_DENOISE_CAP_L7 = 7, /*!<Denoise channel internal reference capacitance is 14.8pf */
|
|
TOUCH_PAD_DENOISE_CAP_MAX = 8
|
|
} touch_pad_denoise_cap_t;
|
|
|
|
/** Touch sensor denoise configuration */
|
|
typedef struct touch_pad_denoise {
|
|
touch_pad_denoise_grade_t grade; /*!<Select denoise range of denoise channel.
|
|
Determined by measuring the noise amplitude of the denoise channel. */
|
|
touch_pad_denoise_cap_t cap_level; /*!<Select internal reference capacitance of denoise channel.
|
|
Ensure that the denoise readings are closest to the readings of the channel being measured.
|
|
Use `touch_pad_denoise_read_data` to get the reading of denoise channel.
|
|
The equivalent capacitance of the shielded channel can be calculated
|
|
from the reading of denoise channel. */
|
|
} touch_pad_denoise_t;
|
|
|
|
/** Touch sensor shield channel drive capability level */
|
|
typedef enum {
|
|
TOUCH_PAD_SHIELD_DRV_L0 = 0,/*!<The max equivalent capacitance in shield channel is 40pf */
|
|
TOUCH_PAD_SHIELD_DRV_L1, /*!<The max equivalent capacitance in shield channel is 80pf */
|
|
TOUCH_PAD_SHIELD_DRV_L2, /*!<The max equivalent capacitance in shield channel is 120pf */
|
|
TOUCH_PAD_SHIELD_DRV_L3, /*!<The max equivalent capacitance in shield channel is 160pf */
|
|
TOUCH_PAD_SHIELD_DRV_L4, /*!<The max equivalent capacitance in shield channel is 200pf */
|
|
TOUCH_PAD_SHIELD_DRV_L5, /*!<The max equivalent capacitance in shield channel is 240pf */
|
|
TOUCH_PAD_SHIELD_DRV_L6, /*!<The max equivalent capacitance in shield channel is 280pf */
|
|
TOUCH_PAD_SHIELD_DRV_L7, /*!<The max equivalent capacitance in shield channel is 320pf */
|
|
TOUCH_PAD_SHIELD_DRV_MAX
|
|
} touch_pad_shield_driver_t;
|
|
|
|
/** Touch sensor waterproof configuration */
|
|
typedef struct touch_pad_waterproof {
|
|
touch_pad_t guard_ring_pad; /*!<Waterproof. Select touch channel use for guard pad.
|
|
Guard pad is used to detect the large area of water covering the touch panel. */
|
|
touch_pad_shield_driver_t shield_driver;/*!<Waterproof. Shield channel drive capability configuration.
|
|
Shield pad is used to shield the influence of water droplets covering the touch panel.
|
|
When the waterproof function is enabled, Touch14 is set as shield channel by default.
|
|
The larger the parasitic capacitance on the shielding channel, the higher the drive capability needs to be set.
|
|
The equivalent capacitance of the shield channel can be estimated through the reading value of the denoise channel(Touch0).*/
|
|
} touch_pad_waterproof_t;
|
|
|
|
/** Touch sensor proximity detection configuration */
|
|
#define TOUCH_PROXIMITY_MEAS_NUM_MAX (0xFF)
|
|
|
|
/** Touch channel idle state configuration */
|
|
typedef enum {
|
|
TOUCH_PAD_CONN_HIGHZ = 0, /*!<Idle status of touch channel is high resistance state */
|
|
TOUCH_PAD_CONN_GND = 1, /*!<Idle status of touch channel is ground connection */
|
|
TOUCH_PAD_CONN_MAX
|
|
} touch_pad_conn_type_t;
|
|
|
|
/**
|
|
* @brief Touch channel IIR filter coefficient configuration.
|
|
* @note On ESP32S2. There is an error in the IIR calculation. The magnitude of the error is twice the filter coefficient.
|
|
* So please select a smaller filter coefficient on the basis of meeting the filtering requirements.
|
|
* Recommended filter coefficient selection `IIR_16`.
|
|
*/
|
|
typedef enum {
|
|
TOUCH_PAD_FILTER_IIR_4 = 0, /*!<The filter mode is first-order IIR filter. The coefficient is 4. */
|
|
TOUCH_PAD_FILTER_IIR_8, /*!<The filter mode is first-order IIR filter. The coefficient is 8. */
|
|
TOUCH_PAD_FILTER_IIR_16, /*!<The filter mode is first-order IIR filter. The coefficient is 16 (Typical value). */
|
|
TOUCH_PAD_FILTER_IIR_32, /*!<The filter mode is first-order IIR filter. The coefficient is 32. */
|
|
TOUCH_PAD_FILTER_IIR_64, /*!<The filter mode is first-order IIR filter. The coefficient is 64. */
|
|
TOUCH_PAD_FILTER_IIR_128, /*!<The filter mode is first-order IIR filter. The coefficient is 128. */
|
|
TOUCH_PAD_FILTER_IIR_256, /*!<The filter mode is first-order IIR filter. The coefficient is 256. */
|
|
TOUCH_PAD_FILTER_JITTER, /*!<The filter mode is jitter filter */
|
|
TOUCH_PAD_FILTER_MAX
|
|
} touch_filter_mode_t;
|
|
|
|
/**
|
|
* @brief Level of filter applied on the original data against large noise interference.
|
|
* @note On ESP32S2. There is an error in the IIR calculation. The magnitude of the error is twice the filter coefficient.
|
|
* So please select a smaller filter coefficient on the basis of meeting the filtering requirements.
|
|
* Recommended filter coefficient selection `IIR_2`.
|
|
*/
|
|
typedef enum {
|
|
TOUCH_PAD_SMOOTH_OFF = 0, /*!<No filtering of raw data. */
|
|
TOUCH_PAD_SMOOTH_IIR_2 = 1, /*!<Filter the raw data. The coefficient is 2 (Typical value). */
|
|
TOUCH_PAD_SMOOTH_IIR_4 = 2, /*!<Filter the raw data. The coefficient is 4. */
|
|
TOUCH_PAD_SMOOTH_IIR_8 = 3, /*!<Filter the raw data. The coefficient is 8. */
|
|
TOUCH_PAD_SMOOTH_MAX,
|
|
} touch_smooth_mode_t;
|
|
|
|
#if CONFIG_IDF_TARGET_ESP32P4
|
|
/**
|
|
* @brief Touch channel counting mode of the binarized touch output
|
|
*
|
|
*/
|
|
typedef enum {
|
|
TOUCH_PAD_OUT_AS_DATA, /*!< Counting the output of touch channel as data.
|
|
* The value will be smaller than actual value but more sensitive when the frequency of touch_out is close to the source clock
|
|
*/
|
|
TOUCH_PAD_OUT_AS_CLOCK, /*!< Counting the output of touch channel as clock.
|
|
* The value is accurate but less sensitive when the frequency of touch_out is close to the source clock
|
|
*/
|
|
} touch_out_mode_t;
|
|
#endif
|
|
|
|
/** Touch sensor filter configuration */
|
|
typedef struct touch_filter_config {
|
|
touch_filter_mode_t mode; /*!<Set filter mode. The input of the filter is the raw value of touch reading,
|
|
and the output of the filter is involved in the judgment of the touch state. */
|
|
uint32_t debounce_cnt; /*!<Set debounce count, such as `n`. If the measured values continue to exceed
|
|
the threshold for `n+1` times, the touch sensor state changes.
|
|
Range: 0 ~ 7 */
|
|
uint32_t noise_thr; /*!<Noise threshold coefficient. Higher = More noise resistance.
|
|
The actual noise should be less than (noise coefficient * touch threshold).
|
|
Range: 0 ~ 3. The coefficient is 0: 4/8; 1: 3/8; 2: 2/8; 3: 1; */
|
|
uint32_t jitter_step; /*!<Set jitter filter step size. Range: 0 ~ 15 */
|
|
touch_smooth_mode_t smh_lvl;/*!<Level of filter applied on the original data against large noise interference. */
|
|
#define TOUCH_DEBOUNCE_CNT_MAX (7)
|
|
#define TOUCH_NOISE_THR_MAX (3)
|
|
#define TOUCH_JITTER_STEP_MAX (15)
|
|
} touch_filter_config_t;
|
|
|
|
/** Touch sensor channel sleep configuration */
|
|
typedef struct {
|
|
touch_pad_t touch_num; /*!<Set touch channel number for sleep pad.
|
|
Only one touch sensor channel is supported in deep sleep mode.
|
|
If clear the sleep channel, point this pad to `TOUCH_PAD_NUM0` */
|
|
bool en_proximity; /*!<enable proximity function for sleep pad */
|
|
} touch_pad_sleep_channel_t;
|
|
|
|
#endif // !CONFIG_IDF_TARGET_ESP32
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|