kopia lustrzana https://github.com/espressif/esp-idf
543 wiersze
18 KiB
C
543 wiersze
18 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* NOTICE
|
|
* The hal is not public api, don't use in application code.
|
|
* See readme.md in hal/include/hal/readme.md
|
|
******************************************************************************/
|
|
|
|
// The HAL layer for GPIO
|
|
|
|
#pragma once
|
|
|
|
#include "soc/gpio_periph.h"
|
|
#include "soc/soc_caps.h"
|
|
#include "hal/gpio_ll.h"
|
|
#include "hal/gpio_types.h"
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
// Get GPIO hardware instance with giving gpio num
|
|
#define GPIO_HAL_GET_HW(num) GPIO_LL_GET_HW(num)
|
|
|
|
/**
|
|
* Context that should be maintained by both the driver and the HAL
|
|
*/
|
|
|
|
typedef struct {
|
|
gpio_dev_t *dev;
|
|
} gpio_hal_context_t;
|
|
|
|
/**
|
|
* @brief Get the configuration for an IO
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
* @param pu Pointer to accept the status of pull-up enabled or not
|
|
* @param pd Pointer to accept the status of pull-down enabled or not
|
|
* @param ie Pointer to accept the status of input enabled or not
|
|
* @param oe Pointer to accept the status of output enabled or not
|
|
* @param od Pointer to accept the status of open-drain enabled or not
|
|
* @param drv Pointer to accept the value of drive strength
|
|
* @param fun_sel Pointer to accept the value of IOMUX function selection
|
|
* @param sig_out Pointer to accept the index of outputting peripheral signal
|
|
* @param slp_sel Pointer to accept the status of pin sleep mode enabled or not
|
|
*/
|
|
#define gpio_hal_get_io_config(hal, gpio_num, pu, pd, ie, oe, od, drv, fun_sel, sig_out, slp_sel) \
|
|
gpio_ll_get_io_config((hal)->dev, gpio_num, pu, pd, ie, oe, od, drv, fun_sel, sig_out, slp_sel)
|
|
|
|
/**
|
|
* @brief Enable pull-up on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_pullup_en(hal, gpio_num) gpio_ll_pullup_en((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable pull-up on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_pullup_dis(hal, gpio_num) gpio_ll_pullup_dis((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable pull-down on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_pulldown_en(hal, gpio_num) gpio_ll_pulldown_en((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable pull-down on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_pulldown_dis(hal, gpio_num) gpio_ll_pulldown_dis((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief GPIO set interrupt trigger type
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number. If you want to set the trigger type of e.g. of GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param intr_type Interrupt type, select from gpio_int_type_t
|
|
*/
|
|
#define gpio_hal_set_intr_type(hal, gpio_num, intr_type) gpio_ll_set_intr_type((hal)->dev, gpio_num, intr_type)
|
|
|
|
/**
|
|
* @brief Get GPIO interrupt status
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param core_id interrupt core id
|
|
* @param status interrupt status
|
|
*/
|
|
#define gpio_hal_get_intr_status(hal, core_id, status) gpio_ll_get_intr_status((hal)->dev, core_id, status)
|
|
|
|
/**
|
|
* @brief Get GPIO interrupt status high
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param core_id interrupt core id
|
|
* @param status interrupt status high
|
|
*/
|
|
#define gpio_hal_get_intr_status_high(hal, core_id, status) gpio_ll_get_intr_status_high((hal)->dev, core_id, status)
|
|
|
|
/**
|
|
* @brief Clear GPIO interrupt status bit
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number. If you want to clear the interrupt status bit of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
*/
|
|
#define gpio_hal_clear_intr_status_bit(hal, gpio_num) (((gpio_num) < 32) ? gpio_ll_clear_intr_status((hal)->dev, 1 << gpio_num) \
|
|
: gpio_ll_clear_intr_status_high((hal)->dev, 1 << (gpio_num - 32)))
|
|
|
|
/**
|
|
* @brief Enable GPIO module interrupt signal
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number. If you want to enable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param core_id Interrupt enabled CPU to corresponding ID
|
|
*/
|
|
void gpio_hal_intr_enable_on_core(gpio_hal_context_t *hal, uint32_t gpio_num, uint32_t core_id);
|
|
|
|
/**
|
|
* @brief Disable GPIO module interrupt signal
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number. If you want to disable the interrupt of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
*/
|
|
void gpio_hal_intr_disable(gpio_hal_context_t *hal, uint32_t gpio_num);
|
|
|
|
/**
|
|
* @brief Disable input mode on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_input_disable(hal, gpio_num) gpio_ll_input_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable input mode on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_input_enable(hal, gpio_num) gpio_ll_input_enable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable output mode on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_output_disable(hal, gpio_num) gpio_ll_output_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable output mode on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_output_enable(hal, gpio_num) gpio_ll_output_enable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable open-drain mode on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_od_disable(hal, gpio_num) gpio_ll_od_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable open-drain mode on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_od_enable(hal, gpio_num) gpio_ll_od_enable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Select a function for the pin in the IOMUX
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
* @param func Function to assign to the pin
|
|
*/
|
|
#define gpio_hal_func_sel(hal, gpio_num, func) gpio_ll_func_sel((hal)->dev, gpio_num, func)
|
|
|
|
/**
|
|
* @brief Get the GPIO number that is routed to the input peripheral signal through GPIO matrix
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param in_sig_idx Peripheral signal index (tagged as input attribute)
|
|
*
|
|
* @return
|
|
* - -1 Signal bypassed GPIO matrix
|
|
* - Others GPIO number
|
|
*/
|
|
#define gpio_hal_get_in_signal_connected_io(hal, in_sig_idx) gpio_ll_get_in_signal_connected_io((hal)->dev, in_sig_idx)
|
|
|
|
/**
|
|
* @brief GPIO set output level
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number. If you want to set the output level of e.g. GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
* @param level Output level. 0: low ; 1: high
|
|
*/
|
|
#define gpio_hal_set_level(hal, gpio_num, level) gpio_ll_set_level((hal)->dev, gpio_num, level)
|
|
|
|
/**
|
|
* @brief GPIO get input level
|
|
*
|
|
* @warning If the pad is not configured for input (or input and output) the returned value is always 0.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number. If you want to get the logic level of e.g. pin GPIO16, gpio_num should be GPIO_NUM_16 (16);
|
|
*
|
|
* @return
|
|
* - 0 the GPIO input level is 0
|
|
* - 1 the GPIO input level is 1
|
|
*/
|
|
#define gpio_hal_get_level(hal, gpio_num) gpio_ll_get_level((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable GPIO wake-up function.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number.
|
|
*/
|
|
#define gpio_hal_wakeup_enable(hal, gpio_num) gpio_ll_wakeup_enable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable GPIO wake-up function.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_wakeup_disable(hal, gpio_num) gpio_ll_wakeup_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Set GPIO pad drive capability
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
* @param strength Drive capability of the pad
|
|
*/
|
|
#define gpio_hal_set_drive_capability(hal, gpio_num, strength) gpio_ll_set_drive_capability((hal)->dev, gpio_num, strength)
|
|
|
|
/**
|
|
* @brief Get GPIO pad drive capability
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
* @param strength Pointer to accept drive capability of the pad
|
|
*/
|
|
#define gpio_hal_get_drive_capability(hal, gpio_num, strength) gpio_ll_get_drive_capability((hal)->dev, gpio_num, strength)
|
|
|
|
/**
|
|
* @brief Enable gpio pad hold function.
|
|
*
|
|
* The gpio pad hold function works in both input and output modes, but must be output-capable gpios.
|
|
* If pad hold enabled:
|
|
* in output mode: the output level of the pad will be force locked and can not be changed.
|
|
* in input mode: the input value read will not change, regardless the changes of input signal.
|
|
*
|
|
* On ESP32/S2/C3/S3/C2, the state of digital gpio cannot be held during Deep-sleep, and it will resume the hold
|
|
* function when the chip wakes up from Deep-sleep. If the digital gpio also needs to be held during Deep-sleep,
|
|
* `gpio_deep_sleep_hold_en` should also be called.
|
|
*
|
|
* Power down or call gpio_hold_dis will disable this function.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
*/
|
|
#define gpio_hal_hold_en(hal, gpio_num) gpio_ll_hold_en((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable gpio pad hold function.
|
|
*
|
|
* When the chip is woken up from Deep-sleep, the gpio will be set to the default mode, so, the gpio will output
|
|
* the default level if this function is called. If you don't want the level changes, the gpio should be configured to
|
|
* a known state before this function is called.
|
|
* e.g.
|
|
* If you hold gpio18 high during Deep-sleep, after the chip is woken up and `gpio_hold_dis` is called,
|
|
* gpio18 will output low level(because gpio18 is input mode by default). If you don't want this behavior,
|
|
* you should configure gpio18 as output mode and set it to hight level before calling `gpio_hold_dis`.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
*/
|
|
#define gpio_hal_hold_dis(hal, gpio_num) gpio_ll_hold_dis((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Get wether digital gpio pad is held
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number, only support output GPIOs
|
|
*
|
|
* @note digital io means io pad powered by VDD3P3_CPU or VDD_SPI
|
|
* rtc io means io pad powered by VDD3P3_RTC
|
|
* caller must ensure that gpio_num is a digital io pad
|
|
*
|
|
* @return
|
|
* - true digital gpio pad is held
|
|
* - false digital gpio pad is unheld
|
|
*/
|
|
#define gpio_hal_is_digital_io_hold(hal, gpio_num) gpio_ll_is_digital_io_hold((hal)->dev, gpio_num)
|
|
|
|
#if !SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
|
|
/**
|
|
* @brief Enable all digital gpio pad hold function during Deep-sleep.
|
|
*
|
|
* When the chip is in Deep-sleep mode, all digital gpio will hold the state before sleep, and when the chip is woken up,
|
|
* the status of digital gpio will not be held. Note that the pad hold feature only works when the chip is in Deep-sleep mode,
|
|
* when not in sleep mode, the digital gpio state can be changed even you have called this function.
|
|
*
|
|
* Power down or call gpio_hold_dis will disable this function, otherwise, the digital gpio hold feature works as long as the chip enter Deep-sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
*/
|
|
#define gpio_hal_deep_sleep_hold_en(hal) gpio_ll_deep_sleep_hold_en((hal)->dev)
|
|
|
|
/**
|
|
* @brief Disable all digital gpio pad hold function during Deep-sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
*/
|
|
#define gpio_hal_deep_sleep_hold_dis(hal) gpio_ll_deep_sleep_hold_dis((hal)->dev)
|
|
|
|
/**
|
|
* @brief Get whether all digital gpio pad hold function during Deep-sleep is enabled.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
*
|
|
* @return
|
|
* - true deep sleep hold is enabled
|
|
* - false deep sleep hold is disabled
|
|
*/
|
|
#define gpio_hal_deep_sleep_hold_is_en(hal) gpio_ll_deep_sleep_hold_is_en((hal)->dev)
|
|
#endif //!SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP
|
|
|
|
/**
|
|
* @brief Set pad input to a peripheral signal through the IOMUX.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number of the pad.
|
|
* @param signal_idx Peripheral signal id to input. One of the ``*_IN_IDX`` signals in ``soc/gpio_sig_map.h``.
|
|
*/
|
|
#define gpio_hal_iomux_in(hal, gpio_num, signal_idx) gpio_ll_iomux_in((hal)->dev, gpio_num, signal_idx)
|
|
|
|
/**
|
|
* @brief Set peripheral output to an GPIO pad through the IOMUX.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num gpio_num GPIO number of the pad.
|
|
* @param func The function number of the peripheral pin to output pin.
|
|
* One of the ``FUNC_X_*`` of specified pin (X) in ``soc/io_mux_reg.h``.
|
|
* @param oen_inv True if the output enable needs to be inverted, otherwise False.
|
|
*/
|
|
#define gpio_hal_iomux_out(hal, gpio_num, func, oen_inv) gpio_ll_iomux_out((hal)->dev, gpio_num, func, oen_inv)
|
|
|
|
#if SOC_GPIO_SUPPORT_FORCE_HOLD
|
|
/**
|
|
* @brief Force hold all digital gpio pads (including those powered by VDD3P3_RTC power domain).
|
|
* @note GPIO force hold, whether the chip in sleep mode or wakeup mode.
|
|
*/
|
|
#define gpio_hal_force_hold_all() gpio_ll_force_hold_all()
|
|
|
|
/**
|
|
* @brief Force unhold all digital gpio pads (including those powered by VDD3P3_RTC power domain).
|
|
* @note GPIO force unhold, whether the chip in sleep mode or wakeup mode.
|
|
*/
|
|
#define gpio_hal_force_unhold_all() gpio_ll_force_unhold_all()
|
|
#endif
|
|
|
|
/**
|
|
* @brief Enable pull-up on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_pullup_en(hal, gpio_num) gpio_ll_sleep_pullup_en((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable pull-up on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_pullup_dis(hal, gpio_num) gpio_ll_sleep_pullup_dis((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable pull-down on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_pulldown_en(hal, gpio_num) gpio_ll_sleep_pulldown_en((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable pull-down on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_pulldown_dis(hal, gpio_num) gpio_ll_sleep_pulldown_dis((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable sleep select on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_sel_en(hal, gpio_num) gpio_ll_sleep_sel_en((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable sleep select on GPIO.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_sel_dis(hal, gpio_num) gpio_ll_sleep_sel_dis((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable input mode on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_input_disable(hal, gpio_num) gpio_ll_sleep_input_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable input mode on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_input_enable(hal, gpio_num) gpio_ll_sleep_input_enable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Disable output mode on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_output_disable(hal, gpio_num) gpio_ll_sleep_output_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Enable output mode on GPIO when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_sleep_output_enable(hal, gpio_num) gpio_ll_sleep_output_enable((hal)->dev, gpio_num)
|
|
|
|
#if CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL
|
|
/**
|
|
* @brief Apply slp_pu/slp_pd configuration to fun_pu/fun_pd when system sleep.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number.
|
|
*/
|
|
void gpio_hal_sleep_pupd_config_apply(gpio_hal_context_t *hal, uint32_t gpio_num);
|
|
|
|
/**
|
|
* @brief Restore fun_pu/fun_pd configuration when system wakeup.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number.
|
|
*/
|
|
void gpio_hal_sleep_pupd_config_unapply(gpio_hal_context_t *hal, uint32_t gpio_num);
|
|
#endif // CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL
|
|
|
|
#if SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP && (SOC_RTCIO_PIN_COUNT == 0)
|
|
/**
|
|
* @brief Enable GPIO deep-sleep wake-up function.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number.
|
|
* @param intr_type GPIO wake-up type. Only GPIO_INTR_LOW_LEVEL or GPIO_INTR_HIGH_LEVEL can be used.
|
|
*/
|
|
#define gpio_hal_deepsleep_wakeup_enable(hal, gpio_num, intr_type) gpio_ll_deepsleep_wakeup_enable((hal)->dev, gpio_num, intr_type)
|
|
|
|
/**
|
|
* @brief Disable GPIO deep-sleep wake-up function.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_deepsleep_wakeup_disable(hal, gpio_num) gpio_ll_deepsleep_wakeup_disable((hal)->dev, gpio_num)
|
|
|
|
/**
|
|
* @brief Get the status of whether an IO is used for deep-sleep wake-up.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*
|
|
* @return True if the pin is enabled to wake up from deep-sleep
|
|
*/
|
|
#define gpio_hal_deepsleep_wakeup_is_enabled(hal, gpio_num) gpio_ll_deepsleep_wakeup_is_enabled((hal)->dev, gpio_num)
|
|
#endif //SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP
|
|
|
|
/**
|
|
* @brief Select a function for the pin in the IOMUX
|
|
*
|
|
* @param pin_name Pin name to configure
|
|
* @param func Function to assign to the pin
|
|
*/
|
|
#define gpio_hal_iomux_func_sel(pin_name, func) gpio_ll_iomux_func_sel(pin_name, func)
|
|
|
|
#if SOC_GPIO_SUPPORT_PIN_HYS_FILTER
|
|
/**
|
|
* @brief Control gpio hysteresis enable/disable by software.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
* @param enable enable or disable the hysteresis
|
|
*/
|
|
void gpio_hal_hysteresis_soft_enable(gpio_hal_context_t *hal, uint32_t gpio_num, bool enable);
|
|
|
|
#if SOC_GPIO_SUPPORT_PIN_HYS_CTRL_BY_EFUSE
|
|
/**
|
|
* @brief Set gpio hysteresis enable/disable by efuse.
|
|
*
|
|
* @param hal Context of the HAL layer
|
|
* @param gpio_num GPIO number
|
|
*/
|
|
#define gpio_hal_hysteresis_from_efuse(hal, gpio_num) gpio_ll_pin_input_hysteresis_ctrl_sel_efuse((hal)->dev, gpio_num)
|
|
#endif
|
|
#endif // SOC_GPIO_SUPPORT_PIN_HYS_FILTER
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|