kopia lustrzana https://github.com/espressif/esp-idf
591 wiersze
27 KiB
C
591 wiersze
27 KiB
C
/*
|
|
* SPDX-FileCopyrightText: 2022-2023 Espressif Systems (Shanghai) CO LTD
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
#include <string.h>
|
|
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/semphr.h"
|
|
#include "sdkconfig.h"
|
|
|
|
#if CONFIG_I2S_ENABLE_DEBUG_LOG
|
|
// The local log level must be defined before including esp_log.h
|
|
// Set the maximum log level for this source file
|
|
#define LOG_LOCAL_LEVEL ESP_LOG_DEBUG
|
|
#endif
|
|
|
|
#include "hal/i2s_hal.h"
|
|
#include "driver/gpio.h"
|
|
#include "driver/i2s_pdm.h"
|
|
#include "i2s_private.h"
|
|
#include "clk_ctrl_os.h"
|
|
#include "esp_intr_alloc.h"
|
|
#include "esp_check.h"
|
|
|
|
static const char *TAG = "i2s_pdm";
|
|
|
|
/*---------------------------------------------------------------
|
|
PDM TX
|
|
---------------------------------------------------------------*/
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_TX
|
|
#define I2S_PDM_TX_BCLK_DIV_MIN 8 /*!< The minimum bclk_div for PDM TX mode */
|
|
static esp_err_t i2s_pdm_tx_calculate_clock(i2s_chan_handle_t handle, const i2s_pdm_tx_clk_config_t *clk_cfg, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
uint32_t rate = clk_cfg->sample_rate_hz;
|
|
i2s_pdm_tx_clk_config_t *pdm_tx_clk = (i2s_pdm_tx_clk_config_t *)clk_cfg;
|
|
|
|
// Over sampling ratio (integer, mostly should be 1 or 2)
|
|
uint32_t over_sample_ratio = pdm_tx_clk->up_sample_fp / pdm_tx_clk->up_sample_fs;
|
|
clk_info->bclk = rate * I2S_LL_PDM_BCK_FACTOR * over_sample_ratio;
|
|
clk_info->bclk_div = clk_cfg->bclk_div < I2S_PDM_TX_BCLK_DIV_MIN ? I2S_PDM_TX_BCLK_DIV_MIN : clk_cfg->bclk_div;
|
|
clk_info->mclk = clk_info->bclk * clk_info->bclk_div;
|
|
clk_info->sclk = i2s_get_source_clk_freq(clk_cfg->clk_src, clk_info->mclk);
|
|
clk_info->mclk_div = clk_info->sclk / clk_info->mclk;
|
|
|
|
/* Check if the configuration is correct */
|
|
ESP_RETURN_ON_FALSE(clk_info->mclk_div, ESP_ERR_INVALID_ARG, TAG, "sample rate is too large");
|
|
/* Set up sampling configuration */
|
|
i2s_ll_tx_set_pdm_fpfs(handle->controller->hal.dev, pdm_tx_clk->up_sample_fp, pdm_tx_clk->up_sample_fs);
|
|
i2s_ll_tx_set_pdm_over_sample_ratio(handle->controller->hal.dev, over_sample_ratio);
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_pdm_tx_set_clock(i2s_chan_handle_t handle, const i2s_pdm_tx_clk_config_t *clk_cfg)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
i2s_pdm_tx_config_t *pdm_tx_cfg = (i2s_pdm_tx_config_t *)(handle->mode_info);
|
|
ESP_RETURN_ON_FALSE(clk_cfg->up_sample_fs <= 480, ESP_ERR_INVALID_ARG, TAG, "up_sample_fs should be within 480");
|
|
|
|
i2s_hal_clock_info_t clk_info;
|
|
/* Calculate clock parameters */
|
|
ESP_RETURN_ON_ERROR(i2s_pdm_tx_calculate_clock(handle, clk_cfg, &clk_info), TAG, "clock calculate failed");
|
|
ESP_LOGD(TAG, "Clock division info: [sclk] %"PRIu32" Hz [mdiv] %d [mclk] %"PRIu32" Hz [bdiv] %d [bclk] %"PRIu32" Hz",
|
|
clk_info.sclk, clk_info.mclk_div, clk_info.mclk, clk_info.bclk_div, clk_info.bclk);
|
|
|
|
portENTER_CRITICAL(&g_i2s.spinlock);
|
|
/* Set clock configurations in HAL*/
|
|
i2s_hal_set_tx_clock(&handle->controller->hal, &clk_info, clk_cfg->clk_src);
|
|
#if SOC_I2S_HW_VERSION_2
|
|
/* Work around for PDM TX clock, overwrite the raw division directly to reduce the noise
|
|
* This set of coefficients is a special division to reduce the background noise in PDM TX mode */
|
|
i2s_ll_tx_set_raw_clk_div(handle->controller->hal.dev, clk_info.mclk_div, 1, 1, 0, 0);
|
|
#endif
|
|
portEXIT_CRITICAL(&g_i2s.spinlock);
|
|
|
|
/* Update the mode info: clock configuration */
|
|
memcpy(&(pdm_tx_cfg->clk_cfg), clk_cfg, sizeof(i2s_pdm_tx_clk_config_t));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static esp_err_t i2s_pdm_tx_set_slot(i2s_chan_handle_t handle, const i2s_pdm_tx_slot_config_t *slot_cfg)
|
|
{
|
|
/* Update the total slot num and active slot num */
|
|
handle->total_slot = 2;
|
|
handle->active_slot = slot_cfg->slot_mode == I2S_SLOT_MODE_MONO ? 1 : 2;
|
|
|
|
uint32_t buf_size = i2s_get_buf_size(handle, slot_cfg->data_bit_width, handle->dma.frame_num);
|
|
/* The DMA buffer need to re-allocate if the buffer size changed */
|
|
if (handle->dma.buf_size != buf_size) {
|
|
handle->dma.buf_size = buf_size;
|
|
ESP_RETURN_ON_ERROR(i2s_free_dma_desc(handle), TAG, "failed to free the old dma descriptor");
|
|
ESP_RETURN_ON_ERROR(i2s_alloc_dma_desc(handle, handle->dma.desc_num, buf_size),
|
|
TAG, "allocate memory for dma descriptor failed");
|
|
}
|
|
/* Share bck and ws signal in full-duplex mode */
|
|
i2s_ll_share_bck_ws(handle->controller->hal.dev, handle->controller->full_duplex);
|
|
|
|
portENTER_CRITICAL(&g_i2s.spinlock);
|
|
/* Configure the hardware to apply PDM format */
|
|
bool is_slave = handle->role == I2S_ROLE_SLAVE;
|
|
i2s_hal_pdm_set_tx_slot(&(handle->controller->hal), is_slave, (i2s_hal_slot_config_t *)slot_cfg);
|
|
portEXIT_CRITICAL(&g_i2s.spinlock);
|
|
|
|
/* Update the mode info: slot configuration */
|
|
i2s_pdm_tx_config_t *pdm_tx_cfg = (i2s_pdm_tx_config_t *)handle->mode_info;
|
|
memcpy(&(pdm_tx_cfg->slot_cfg), slot_cfg, sizeof(i2s_pdm_tx_slot_config_t));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_pdm_tx_set_gpio(i2s_chan_handle_t handle, const i2s_pdm_tx_gpio_config_t *gpio_cfg)
|
|
{
|
|
int id = handle->controller->id;
|
|
|
|
/* Check validity of selected pins */
|
|
ESP_RETURN_ON_FALSE((gpio_cfg->clk == -1 || GPIO_IS_VALID_GPIO(gpio_cfg->clk)),
|
|
ESP_ERR_INVALID_ARG, TAG, "clk gpio is invalid");
|
|
ESP_RETURN_ON_FALSE((gpio_cfg->dout == -1 || GPIO_IS_VALID_GPIO(gpio_cfg->dout)),
|
|
ESP_ERR_INVALID_ARG, TAG, "dout gpio is invalid");
|
|
i2s_pdm_tx_config_t *pdm_tx_cfg = (i2s_pdm_tx_config_t *)handle->mode_info;
|
|
/* Set data output GPIO */
|
|
i2s_gpio_check_and_set(gpio_cfg->dout, i2s_periph_signal[id].data_out_sig, false, false);
|
|
#if SOC_I2S_PDM_MAX_TX_LINES > 1
|
|
if (pdm_tx_cfg->slot_cfg.line_mode == I2S_PDM_TX_TWO_LINE_DAC) {
|
|
i2s_gpio_check_and_set(gpio_cfg->dout2, i2s_periph_signal[id].data_out_sigs[1], false, false);
|
|
}
|
|
#endif
|
|
|
|
if (handle->role == I2S_ROLE_SLAVE) {
|
|
/* For "tx + slave" mode, select TX signal index for ws and bck */
|
|
if (!handle->controller->full_duplex) {
|
|
i2s_gpio_check_and_set(gpio_cfg->clk, i2s_periph_signal[id].s_tx_ws_sig, true, gpio_cfg->invert_flags.clk_inv);
|
|
/* For "tx + rx + slave" or "rx + slave" mode, select RX signal index for ws and bck */
|
|
} else {
|
|
i2s_gpio_check_and_set(gpio_cfg->clk, i2s_periph_signal[id].s_rx_ws_sig, true, gpio_cfg->invert_flags.clk_inv);
|
|
}
|
|
} else {
|
|
i2s_gpio_check_and_set(gpio_cfg->clk, i2s_periph_signal[id].m_tx_ws_sig, false, gpio_cfg->invert_flags.clk_inv);
|
|
}
|
|
#if SOC_I2S_HW_VERSION_2
|
|
i2s_ll_mclk_bind_to_tx_clk(handle->controller->hal.dev);
|
|
#endif
|
|
/* Update the mode info: gpio configuration */
|
|
memcpy(&(pdm_tx_cfg->gpio_cfg), gpio_cfg, sizeof(i2s_pdm_tx_gpio_config_t));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_channel_init_pdm_tx_mode(i2s_chan_handle_t handle, const i2s_pdm_tx_config_t *pdm_tx_cfg)
|
|
{
|
|
#if CONFIG_I2S_ENABLE_DEBUG_LOG
|
|
esp_log_level_set(TAG, ESP_LOG_DEBUG);
|
|
#endif
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_TX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a TX handle");
|
|
ESP_RETURN_ON_FALSE(handle->controller->id == I2S_NUM_0, ESP_ERR_INVALID_ARG, TAG, "This channel handle is registered on I2S1, but PDM is only supported on I2S0");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_REGISTER, ESP_ERR_INVALID_STATE, err, TAG, "the channel has initialized already");
|
|
handle->mode = I2S_COMM_MODE_PDM;
|
|
/* Allocate memory for storing the configurations of PDM tx mode */
|
|
if (handle->mode_info) {
|
|
free(handle->mode_info);
|
|
}
|
|
handle->mode_info = calloc(1, sizeof(i2s_pdm_tx_config_t));
|
|
ESP_GOTO_ON_FALSE(handle->mode_info, ESP_ERR_NO_MEM, err, TAG, "no memory for storing the configurations");
|
|
/* i2s_set_pdm_tx_slot should be called before i2s_set_pdm_tx_clock and i2s_pdm_tx_set_gpio
|
|
* while initializing, because clock and gpio is relay on the slot */
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_slot(handle, &pdm_tx_cfg->slot_cfg), err, TAG, "initialize channel failed while setting slot");
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_gpio(handle, &pdm_tx_cfg->gpio_cfg), err, TAG, "initialize channel failed while setting gpio pins");
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
/* Enable APLL and acquire its lock when the clock source is APLL */
|
|
if (pdm_tx_cfg->clk_cfg.clk_src == I2S_CLK_SRC_APLL) {
|
|
periph_rtc_apll_acquire();
|
|
handle->apll_en = true;
|
|
}
|
|
#endif
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_clock(handle, &pdm_tx_cfg->clk_cfg), err, TAG, "initialize channel failed while setting clock");
|
|
ESP_GOTO_ON_ERROR(i2s_init_dma_intr(handle, I2S_INTR_ALLOC_FLAGS), err, TAG, "initialize dma interrupt failed");
|
|
|
|
i2s_ll_tx_enable_pdm(handle->controller->hal.dev);
|
|
#if SOC_I2S_HW_VERSION_2
|
|
/* Enable clock to start outputting mclk signal. Some codecs will reset once mclk stop */
|
|
i2s_ll_tx_enable_clock(handle->controller->hal.dev);
|
|
#endif
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_type_t pm_type = ESP_PM_APB_FREQ_MAX;
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (pdm_tx_cfg->clk_cfg.clk_src == I2S_CLK_SRC_APLL) {
|
|
pm_type = ESP_PM_NO_LIGHT_SLEEP;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
ESP_RETURN_ON_ERROR(esp_pm_lock_create(pm_type, 0, "i2s_driver", &handle->pm_lock), TAG, "I2S pm lock create failed");
|
|
#endif
|
|
|
|
/* Initialization finished, mark state as ready */
|
|
handle->state = I2S_CHAN_STATE_READY;
|
|
xSemaphoreGive(handle->mutex);
|
|
ESP_LOGD(TAG, "The tx channel on I2S0 has been initialized to PDM TX mode successfully");
|
|
return ret;
|
|
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_channel_reconfig_pdm_tx_clock(i2s_chan_handle_t handle, const i2s_pdm_tx_clk_config_t *clk_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
I2S_NULL_POINTER_CHECK(TAG, clk_cfg);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_TX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a TX handle");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->mode == I2S_COMM_MODE_PDM, ESP_ERR_INVALID_ARG, err, TAG, "this handle is not working in standard mode");
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "invalid state, I2S should be disabled before reconfiguring the clock");
|
|
i2s_pdm_tx_config_t *pdm_tx_cfg = (i2s_pdm_tx_config_t *)handle->mode_info;
|
|
ESP_GOTO_ON_FALSE(pdm_tx_cfg, ESP_ERR_INVALID_STATE, err, TAG, "initialization not complete");
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
/* Enable APLL and acquire its lock when the clock source is changed to APLL */
|
|
if (clk_cfg->clk_src == I2S_CLK_SRC_APLL && pdm_tx_cfg->clk_cfg.clk_src != I2S_CLK_SRC_APLL) {
|
|
periph_rtc_apll_acquire();
|
|
handle->apll_en = true;
|
|
}
|
|
/* Disable APLL and release its lock when clock source is changed to 160M_PLL */
|
|
if (clk_cfg->clk_src != I2S_CLK_SRC_APLL && pdm_tx_cfg->clk_cfg.clk_src == I2S_CLK_SRC_APLL) {
|
|
periph_rtc_apll_release();
|
|
handle->apll_en = false;
|
|
}
|
|
#endif
|
|
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_clock(handle, clk_cfg), err, TAG, "update clock failed");
|
|
#ifdef CONFIG_PM_ENABLE
|
|
// Create/Re-create power management lock
|
|
if (pdm_tx_cfg->clk_cfg.clk_src != clk_cfg->clk_src) {
|
|
ESP_GOTO_ON_ERROR(esp_pm_lock_delete(handle->pm_lock), err, TAG, "I2S delete old pm lock failed");
|
|
esp_pm_lock_type_t pm_type = ESP_PM_APB_FREQ_MAX;
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (clk_cfg->clk_src == I2S_CLK_SRC_APLL) {
|
|
pm_type = ESP_PM_NO_LIGHT_SLEEP;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
ESP_GOTO_ON_ERROR(esp_pm_lock_create(pm_type, 0, "i2s_driver", &handle->pm_lock), err, TAG, "I2S pm lock create failed");
|
|
}
|
|
#endif //CONFIG_PM_ENABLE
|
|
|
|
xSemaphoreGive(handle->mutex);
|
|
|
|
return ESP_OK;
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_channel_reconfig_pdm_tx_slot(i2s_chan_handle_t handle, const i2s_pdm_tx_slot_config_t *slot_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
I2S_NULL_POINTER_CHECK(TAG, slot_cfg);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_TX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a TX handle");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->mode == I2S_COMM_MODE_PDM, ESP_ERR_INVALID_ARG, err, TAG, "this handle is not working in standard mode");
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "invalid state, I2S should be disabled before reconfiguring the slot");
|
|
|
|
i2s_pdm_tx_config_t *pdm_tx_cfg = (i2s_pdm_tx_config_t *)handle->mode_info;
|
|
ESP_GOTO_ON_FALSE(pdm_tx_cfg, ESP_ERR_INVALID_STATE, err, TAG, "initialization not complete");
|
|
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_slot(handle, slot_cfg), err, TAG, "set i2s standard slot failed");
|
|
|
|
/* If the slot bit width changed, then need to update the clock */
|
|
uint32_t slot_bits = slot_cfg->slot_bit_width == I2S_SLOT_BIT_WIDTH_AUTO ? slot_cfg->data_bit_width : slot_cfg->slot_bit_width;
|
|
if (pdm_tx_cfg->slot_cfg.slot_bit_width == slot_bits) {
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_clock(handle, &pdm_tx_cfg->clk_cfg), err, TAG, "update clock failed");
|
|
}
|
|
|
|
xSemaphoreGive(handle->mutex);
|
|
|
|
return ESP_OK;
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_channel_reconfig_pdm_tx_gpio(i2s_chan_handle_t handle, const i2s_pdm_tx_gpio_config_t *gpio_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
I2S_NULL_POINTER_CHECK(TAG, gpio_cfg);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_TX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a TX handle");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->mode == I2S_COMM_MODE_PDM, ESP_ERR_INVALID_ARG, err, TAG, "This handle is not working in standard mode");
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "Invalid state, I2S should be disabled before reconfiguring the gpio");
|
|
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_tx_set_gpio(handle, gpio_cfg), err, TAG, "set i2s standard slot failed");
|
|
xSemaphoreGive(handle->mutex);
|
|
|
|
return ESP_OK;
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
/*---------------------------------------------------------------
|
|
PDM RX
|
|
---------------------------------------------------------------*/
|
|
|
|
#if SOC_I2S_SUPPORTS_PDM_RX
|
|
#define I2S_PDM_RX_BCLK_DIV_MIN 8 /*!< The minimum bclk_div for PDM RX mode */
|
|
static esp_err_t i2s_pdm_rx_calculate_clock(i2s_chan_handle_t handle, const i2s_pdm_rx_clk_config_t *clk_cfg, i2s_hal_clock_info_t *clk_info)
|
|
{
|
|
uint32_t rate = clk_cfg->sample_rate_hz;
|
|
i2s_pdm_rx_clk_config_t *pdm_rx_clk = (i2s_pdm_rx_clk_config_t *)clk_cfg;
|
|
|
|
clk_info->bclk = rate * I2S_LL_PDM_BCK_FACTOR * (pdm_rx_clk->dn_sample_mode == I2S_PDM_DSR_16S ? 2 : 1);
|
|
clk_info->bclk_div = clk_cfg->bclk_div < I2S_PDM_RX_BCLK_DIV_MIN ? I2S_PDM_RX_BCLK_DIV_MIN : clk_cfg->bclk_div;
|
|
clk_info->mclk = clk_info->bclk * clk_info->bclk_div;
|
|
clk_info->sclk = i2s_get_source_clk_freq(clk_cfg->clk_src, clk_info->mclk);
|
|
clk_info->mclk_div = clk_info->sclk / clk_info->mclk;
|
|
|
|
/* Check if the configuration is correct */
|
|
ESP_RETURN_ON_FALSE(clk_info->mclk_div, ESP_ERR_INVALID_ARG, TAG, "sample rate is too large");
|
|
/* Set down-sampling configuration */
|
|
i2s_ll_rx_set_pdm_dsr(handle->controller->hal.dev, pdm_rx_clk->dn_sample_mode);
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_pdm_rx_set_clock(i2s_chan_handle_t handle, const i2s_pdm_rx_clk_config_t *clk_cfg)
|
|
{
|
|
esp_err_t ret = ESP_OK;
|
|
i2s_pdm_rx_config_t *pdm_rx_cfg = (i2s_pdm_rx_config_t *)(handle->mode_info);
|
|
|
|
i2s_hal_clock_info_t clk_info;
|
|
/* Calculate clock parameters */
|
|
ESP_RETURN_ON_ERROR(i2s_pdm_rx_calculate_clock(handle, clk_cfg, &clk_info), TAG, "clock calculate failed");
|
|
ESP_LOGD(TAG, "Clock division info: [sclk] %"PRIu32" Hz [mdiv] %d [mclk] %"PRIu32" Hz [bdiv] %d [bclk] %"PRIu32" Hz",
|
|
clk_info.sclk, clk_info.mclk_div, clk_info.mclk, clk_info.bclk_div, clk_info.bclk);
|
|
|
|
portENTER_CRITICAL(&g_i2s.spinlock);
|
|
/* Set clock configurations in HAL*/
|
|
i2s_hal_set_rx_clock(&handle->controller->hal, &clk_info, clk_cfg->clk_src);
|
|
portEXIT_CRITICAL(&g_i2s.spinlock);
|
|
|
|
/* Update the mode info: clock configuration */
|
|
memcpy(&(pdm_rx_cfg->clk_cfg), clk_cfg, sizeof(i2s_pdm_rx_clk_config_t));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static esp_err_t i2s_pdm_rx_set_slot(i2s_chan_handle_t handle, const i2s_pdm_rx_slot_config_t *slot_cfg)
|
|
{
|
|
/* Update the total slot num and active slot num */
|
|
handle->total_slot = 2;
|
|
handle->active_slot = slot_cfg->slot_mode == I2S_SLOT_MODE_MONO ? 1 : 2;
|
|
|
|
uint32_t buf_size = i2s_get_buf_size(handle, slot_cfg->data_bit_width, handle->dma.frame_num);
|
|
/* The DMA buffer need to re-allocate if the buffer size changed */
|
|
if (handle->dma.buf_size != buf_size) {
|
|
handle->dma.buf_size = buf_size;
|
|
ESP_RETURN_ON_ERROR(i2s_free_dma_desc(handle), TAG, "failed to free the old dma descriptor");
|
|
ESP_RETURN_ON_ERROR(i2s_alloc_dma_desc(handle, handle->dma.desc_num, buf_size),
|
|
TAG, "allocate memory for dma descriptor failed");
|
|
}
|
|
/* Share bck and ws signal in full-duplex mode */
|
|
i2s_ll_share_bck_ws(handle->controller->hal.dev, handle->controller->full_duplex);
|
|
|
|
portENTER_CRITICAL(&g_i2s.spinlock);
|
|
/* Configure the hardware to apply PDM format */
|
|
bool is_slave = (handle->role == I2S_ROLE_SLAVE) | handle->controller->full_duplex;
|
|
i2s_hal_pdm_set_rx_slot(&(handle->controller->hal), is_slave, (i2s_hal_slot_config_t *)slot_cfg);
|
|
portEXIT_CRITICAL(&g_i2s.spinlock);
|
|
|
|
/* Update the mode info: slot configuration */
|
|
i2s_pdm_rx_config_t *pdm_rx_cfg = (i2s_pdm_rx_config_t *)handle->mode_info;
|
|
memcpy(&(pdm_rx_cfg->slot_cfg), slot_cfg, sizeof(i2s_pdm_rx_slot_config_t));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
static esp_err_t i2s_pdm_rx_set_gpio(i2s_chan_handle_t handle, const i2s_pdm_rx_gpio_config_t *gpio_cfg)
|
|
{
|
|
int id = handle->controller->id;
|
|
|
|
/* Check validity of selected pins */
|
|
ESP_RETURN_ON_FALSE((gpio_cfg->clk == -1 || GPIO_IS_VALID_GPIO(gpio_cfg->clk)),
|
|
ESP_ERR_INVALID_ARG, TAG, "clk gpio is invalid");
|
|
ESP_RETURN_ON_FALSE((gpio_cfg->din == -1 || GPIO_IS_VALID_GPIO(gpio_cfg->din)),
|
|
ESP_ERR_INVALID_ARG, TAG, "dout gpio is invalid");
|
|
i2s_pdm_rx_config_t *pdm_rx_cfg = (i2s_pdm_rx_config_t *)handle->mode_info;
|
|
/* Set data input GPIO */
|
|
#if SOC_I2S_PDM_MAX_RX_LINES > 1
|
|
for (int i = 0; i < SOC_I2S_PDM_MAX_RX_LINES; i++) {
|
|
if (pdm_rx_cfg->slot_cfg.slot_mask & (0x03 << (i * 2))) {
|
|
i2s_gpio_check_and_set(gpio_cfg->dins[i], i2s_periph_signal[id].data_in_sigs[i], true, false);
|
|
}
|
|
}
|
|
#else
|
|
i2s_gpio_check_and_set(gpio_cfg->din, i2s_periph_signal[id].data_in_sig, true, false);
|
|
#endif
|
|
|
|
if (handle->role == I2S_ROLE_SLAVE) {
|
|
/* For "tx + rx + slave" or "rx + slave" mode, select RX signal index for ws and bck */
|
|
i2s_gpio_check_and_set(gpio_cfg->clk, i2s_periph_signal[id].s_rx_ws_sig, true, gpio_cfg->invert_flags.clk_inv);
|
|
} else {
|
|
if (!handle->controller->full_duplex) {
|
|
i2s_gpio_check_and_set(gpio_cfg->clk, i2s_periph_signal[id].m_rx_ws_sig, false, gpio_cfg->invert_flags.clk_inv);
|
|
} else {
|
|
i2s_gpio_check_and_set(gpio_cfg->clk, i2s_periph_signal[id].m_tx_ws_sig, false, gpio_cfg->invert_flags.clk_inv);
|
|
}
|
|
}
|
|
#if SOC_I2S_HW_VERSION_2
|
|
i2s_ll_mclk_bind_to_rx_clk(handle->controller->hal.dev);
|
|
#endif
|
|
/* Update the mode info: gpio configuration */
|
|
memcpy(&(pdm_rx_cfg->gpio_cfg), gpio_cfg, sizeof(i2s_pdm_rx_gpio_config_t));
|
|
|
|
return ESP_OK;
|
|
}
|
|
|
|
esp_err_t i2s_channel_init_pdm_rx_mode(i2s_chan_handle_t handle, const i2s_pdm_rx_config_t *pdm_rx_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_RX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a RX handle");
|
|
ESP_RETURN_ON_FALSE(handle->controller->id == I2S_NUM_0, ESP_ERR_INVALID_ARG, TAG, "This channel handle is registered on I2S1, but PDM is only supported on I2S0");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_REGISTER, ESP_ERR_INVALID_STATE, err, TAG, "the channel has initialized already");
|
|
handle->mode = I2S_COMM_MODE_PDM;
|
|
/* Allocate memory for storing the configurations of PDM rx mode */
|
|
if (handle->mode_info) {
|
|
free(handle->mode_info);
|
|
}
|
|
handle->mode_info = calloc(1, sizeof(i2s_pdm_rx_config_t));
|
|
ESP_GOTO_ON_FALSE(handle->mode_info, ESP_ERR_NO_MEM, err, TAG, "no memory for storing the configurations");
|
|
/* i2s_set_pdm_rx_slot should be called before i2s_set_pdm_rx_clock and i2s_pdm_rx_set_gpio while initializing, because clock is relay on the slot */
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_slot(handle, &pdm_rx_cfg->slot_cfg), err, TAG, "initialize channel failed while setting slot");
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_gpio(handle, &pdm_rx_cfg->gpio_cfg), err, TAG, "initialize channel failed while setting gpio pins");
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
/* Enable APLL and acquire its lock when the clock source is APLL */
|
|
if (pdm_rx_cfg->clk_cfg.clk_src == I2S_CLK_SRC_APLL) {
|
|
periph_rtc_apll_acquire();
|
|
handle->apll_en = true;
|
|
}
|
|
#endif
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_clock(handle, &pdm_rx_cfg->clk_cfg), err, TAG, "initialize channel failed while setting clock");
|
|
ESP_GOTO_ON_ERROR(i2s_init_dma_intr(handle, I2S_INTR_ALLOC_FLAGS), err, TAG, "initialize dma interrupt failed");
|
|
|
|
i2s_ll_rx_enable_pdm(handle->controller->hal.dev);
|
|
#if SOC_I2S_HW_VERSION_2
|
|
/* Enable clock to start outputting mclk signal. Some codecs will reset once mclk stop */
|
|
i2s_ll_rx_enable_clock(handle->controller->hal.dev);
|
|
#endif
|
|
#ifdef CONFIG_PM_ENABLE
|
|
esp_pm_lock_type_t pm_type = ESP_PM_APB_FREQ_MAX;
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (pdm_rx_cfg->clk_cfg.clk_src == I2S_CLK_SRC_APLL) {
|
|
pm_type = ESP_PM_NO_LIGHT_SLEEP;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
ESP_RETURN_ON_ERROR(esp_pm_lock_create(pm_type, 0, "i2s_driver", &handle->pm_lock), TAG, "I2S pm lock create failed");
|
|
#endif
|
|
|
|
/* Initialization finished, mark state as ready */
|
|
handle->state = I2S_CHAN_STATE_READY;
|
|
xSemaphoreGive(handle->mutex);
|
|
ESP_LOGD(TAG, "The rx channel on I2S0 has been initialized to PDM RX mode successfully");
|
|
return ret;
|
|
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_channel_reconfig_pdm_rx_clock(i2s_chan_handle_t handle, const i2s_pdm_rx_clk_config_t *clk_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
I2S_NULL_POINTER_CHECK(TAG, clk_cfg);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_RX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a RX handle");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->mode == I2S_COMM_MODE_PDM, ESP_ERR_INVALID_ARG, err, TAG, "this handle is not working in standard mode");
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "invalid state, I2S should be disabled before reconfiguring the clock");
|
|
i2s_pdm_rx_config_t *pdm_rx_cfg = (i2s_pdm_rx_config_t *)handle->mode_info;
|
|
ESP_GOTO_ON_FALSE(pdm_rx_cfg, ESP_ERR_INVALID_STATE, err, TAG, "initialization not complete");
|
|
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
/* Enable APLL and acquire its lock when the clock source is changed to APLL */
|
|
if (clk_cfg->clk_src == I2S_CLK_SRC_APLL && pdm_rx_cfg->clk_cfg.clk_src != I2S_CLK_SRC_APLL) {
|
|
periph_rtc_apll_acquire();
|
|
handle->apll_en = true;
|
|
}
|
|
/* Disable APLL and release its lock when clock source is changed to 160M_PLL */
|
|
if (clk_cfg->clk_src != I2S_CLK_SRC_APLL && pdm_rx_cfg->clk_cfg.clk_src == I2S_CLK_SRC_APLL) {
|
|
periph_rtc_apll_release();
|
|
handle->apll_en = false;
|
|
}
|
|
#endif
|
|
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_clock(handle, clk_cfg), err, TAG, "update clock failed");
|
|
#ifdef CONFIG_PM_ENABLE
|
|
// Create/Re-create power management lock
|
|
if (pdm_rx_cfg->clk_cfg.clk_src != clk_cfg->clk_src) {
|
|
ESP_GOTO_ON_ERROR(esp_pm_lock_delete(handle->pm_lock), err, TAG, "I2S delete old pm lock failed");
|
|
esp_pm_lock_type_t pm_type = ESP_PM_APB_FREQ_MAX;
|
|
#if SOC_I2S_SUPPORTS_APLL
|
|
if (clk_cfg->clk_src == I2S_CLK_SRC_APLL) {
|
|
pm_type = ESP_PM_NO_LIGHT_SLEEP;
|
|
}
|
|
#endif // SOC_I2S_SUPPORTS_APLL
|
|
ESP_GOTO_ON_ERROR(esp_pm_lock_create(pm_type, 0, "i2s_driver", &handle->pm_lock), err, TAG, "I2S pm lock create failed");
|
|
}
|
|
#endif //CONFIG_PM_ENABLE
|
|
|
|
xSemaphoreGive(handle->mutex);
|
|
|
|
return ESP_OK;
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_channel_reconfig_pdm_rx_slot(i2s_chan_handle_t handle, const i2s_pdm_rx_slot_config_t *slot_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
I2S_NULL_POINTER_CHECK(TAG, slot_cfg);
|
|
ESP_RETURN_ON_FALSE(handle->dir == I2S_DIR_RX, ESP_ERR_INVALID_ARG, TAG, "This channel handle is not a RX handle");
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->mode == I2S_COMM_MODE_PDM, ESP_ERR_INVALID_ARG, err, TAG, "this handle is not working in standard mode");
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "invalid state, I2S should be disabled before reconfiguring the slot");
|
|
|
|
i2s_pdm_rx_config_t *pdm_rx_cfg = (i2s_pdm_rx_config_t *)handle->mode_info;
|
|
ESP_GOTO_ON_FALSE(pdm_rx_cfg, ESP_ERR_INVALID_STATE, err, TAG, "initialization not complete");
|
|
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_slot(handle, slot_cfg), err, TAG, "set i2s standard slot failed");
|
|
|
|
/* If the slot bit width changed, then need to update the clock */
|
|
uint32_t slot_bits = slot_cfg->slot_bit_width == I2S_SLOT_BIT_WIDTH_AUTO ? slot_cfg->data_bit_width : slot_cfg->slot_bit_width;
|
|
if (pdm_rx_cfg->slot_cfg.slot_bit_width == slot_bits) {
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_clock(handle, &pdm_rx_cfg->clk_cfg), err, TAG, "update clock failed");
|
|
}
|
|
|
|
xSemaphoreGive(handle->mutex);
|
|
|
|
return ESP_OK;
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
esp_err_t i2s_channel_reconfig_pdm_rx_gpio(i2s_chan_handle_t handle, const i2s_pdm_rx_gpio_config_t *gpio_cfg)
|
|
{
|
|
I2S_NULL_POINTER_CHECK(TAG, handle);
|
|
I2S_NULL_POINTER_CHECK(TAG, gpio_cfg);
|
|
|
|
esp_err_t ret = ESP_OK;
|
|
|
|
xSemaphoreTake(handle->mutex, portMAX_DELAY);
|
|
ESP_GOTO_ON_FALSE(handle->mode == I2S_COMM_MODE_PDM, ESP_ERR_INVALID_ARG, err, TAG, "This handle is not working in standard mode");
|
|
ESP_GOTO_ON_FALSE(handle->state == I2S_CHAN_STATE_READY, ESP_ERR_INVALID_STATE, err, TAG, "Invalid state, I2S should be disabled before reconfiguring the gpio");
|
|
|
|
ESP_GOTO_ON_ERROR(i2s_pdm_rx_set_gpio(handle, gpio_cfg), err, TAG, "set i2s standard slot failed");
|
|
xSemaphoreGive(handle->mutex);
|
|
|
|
return ESP_OK;
|
|
err:
|
|
xSemaphoreGive(handle->mutex);
|
|
return ret;
|
|
}
|
|
|
|
#endif // SOC_I2S_SUPPORTS_PDM_RX
|