mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/protocols/sockets/non_blocking
Historia
Ivan Grokhotkov 6d87100a70
feat(examples): add local components via idf_component.yml 
Specifying all the dependencies (managed and local) in the manifest
makes it easier for users to see every component the example
depends on.
 		2023-09-19 10:38:24 +02:00
..
main feat(examples): add local components via idf_component.yml 2023-09-19 10:38:24 +02:00
CMakeLists.txt feat(examples): add local components via idf_component.yml 2023-09-19 10:38:24 +02:00
README.md
…
pytet_socket_non_blocking.py
…
sdkconfig.ci
…

README.md

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-P4 ESP32-S2 ESP32-S3

TCP non-blocking client and server examples

(See the README.md file in the upper level 'examples' directory for more information about examples.)

The application aims to demonstrate a simple use of TCP sockets in a nonblocking mode. It could be configured to run either a TCP server, or a TCP client, or both, in the project configuration settings.

How to use example

The example is configured by default as the TCP client.

Note that the example uses string representation of IP addresses and ports and thus could be used on both IPv4 and IPv6 protocols.

TCP Client

In the client mode, the example connects to a configured hostname or address, sends the specified payload data and waits for a response, then closes the connection. By default, it connects to a public http server and performs a simple http GET request.

TCP Server

The server example creates a non-blocking TCP socket with the specified port number and polls till a connection request from the client arrives. After accepting a request from the client, a connection between server and client is established, and the application polls for some data to be received from the client. Received data are printed as ASCII text and retransmitted back to the client.

The server could listen on the specified interface (by the configured bound address) and serves multiple clients. It resumes to listening for new connections when the client's socket gets closed.

Hardware Required

This example can be run on any commonly available ESP32 development board.

Configure the project

idf.py menuconfig

Set following parameters under Example Configuration Options:

  • Set EXAMPLE_TCP_SERVER to use the example as a non-blocking TCP server

    • Configure EXAMPLE_TCP_SERVER_BIND_ADDRESS to a string representation of the address to bind the server socket to.
    • Configure EXAMPLE_TCP_SERVER_BIND_PORT to the port number.

  • Set EXAMPLE_TCP_CLIENT to use the example as a non-blocking TCP client

    • Configure EXAMPLE_TCP_CLIENT_CONNECT_ADDRESS to a string representation of the address to connect the client to.
    • Configure EXAMPLE_TCP_CLIENT_CONNECT_PORT to the port number.

  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Troubleshooting

Follow the same troubleshooting instruction as for the standard TCP sever and the TCP client, using the host tools and scripts as descibed in the upper level documentation on BSD socket examples.