esp-idf/components/bootloader/Makefile.projbuild

160 wiersze
6.1 KiB
Makefile

# Bootloader component (top-level project parts)
#
# The bootloader is not a real component that gets linked into the project.
# Instead it is an entire standalone project (in subproject/) that gets
# built in the upper project's build directory. This Makefile.projbuild provides
# the glue to build the bootloader project from the original project. It
# basically runs Make in the subproject/ directory but it needs to
# zero some variables the ESP-IDF project.mk makefile exports first, to not
# let them interfere.
#
BOOTLOADER_COMPONENT_PATH := $(COMPONENT_PATH)
BOOTLOADER_BUILD_DIR=$(abspath $(BUILD_DIR_BASE)/bootloader)
BOOTLOADER_BIN=$(BOOTLOADER_BUILD_DIR)/bootloader.bin
# signing key path is resolved relative to the project directory
CONFIG_SECURE_BOOT_SIGNING_KEY ?=
SECURE_BOOT_SIGNING_KEY=$(abspath $(call dequote,$(CONFIG_SECURE_BOOT_SIGNING_KEY)))
export SECURE_BOOT_SIGNING_KEY # used by bootloader_support component
# Has a matching value in bootloader_support esp_flash_partitions.h
BOOTLOADER_OFFSET := 0x1000
# Custom recursive make for bootloader sub-project
#
# NB: Some variables are cleared in the environment, not
# overriden, because they need to be re-defined in the child
# project.
BOOTLOADER_MAKE= +\
PROJECT_PATH= \
COMPONENT_DIRS= \
$(MAKE) -C $(BOOTLOADER_COMPONENT_PATH)/subproject \
V=$(V) \
BUILD_DIR_BASE=$(BOOTLOADER_BUILD_DIR) \
TEST_COMPONENTS= \
TESTS_ALL= \
EXCLUDE_COMPONENTS=
.PHONY: bootloader-clean bootloader-flash bootloader-list-components bootloader $(BOOTLOADER_BIN)
$(BOOTLOADER_BIN): $(SDKCONFIG_MAKEFILE)
$(BOOTLOADER_MAKE) $@
clean: bootloader-clean
bootloader-list-components:
$(BOOTLOADER_MAKE) list-components
ifndef CONFIG_SECURE_BOOT
# If secure boot disabled, bootloader flashing is integrated
# with 'make flash' and no warnings are printed.
bootloader: $(BOOTLOADER_BIN) | check_python_dependencies
@echo $(SEPARATOR)
@echo "Bootloader built. Default flash command is:"
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $^"
ESPTOOL_ALL_FLASH_ARGS += $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)
bootloader-flash: $(BOOTLOADER_BIN) $(call prereq_if_explicit,erase_flash) | check_python_dependencies
$(ESPTOOLPY_WRITE_FLASH) 0x1000 $^
else ifdef CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH
# One time flashing requires user to run esptool.py command themselves,
# and warning is printed about inability to reflash.
#
# The flashing command is deliberately printed without an auto-reset
# step, so the device doesn't immediately reset to flash itself.
bootloader: $(BOOTLOADER_BIN) | check_python_dependencies
@echo $(SEPARATOR)
@echo "Bootloader built. One-time flash command is:"
@echo "$(subst hard_reset,no_reset,$(ESPTOOLPY_WRITE_FLASH)) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
@echo $(SEPARATOR)
@echo "* IMPORTANT: After first boot, BOOTLOADER CANNOT BE RE-FLASHED on same device"
else ifdef CONFIG_SECURE_BOOTLOADER_REFLASHABLE
# Reflashable secure bootloader
# generates a digest binary (bootloader + digest)
ifdef CONFIG_SECURE_BOOTLOADER_KEY_ENCODING_192BIT
KEY_DIGEST_LEN=192
else
KEY_DIGEST_LEN=256
endif
BOOTLOADER_DIGEST_BIN := $(BOOTLOADER_BUILD_DIR)/bootloader-reflash-digest.bin
SECURE_BOOTLOADER_KEY := $(BOOTLOADER_BUILD_DIR)/secure-bootloader-key-$(KEY_DIGEST_LEN).bin
ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
$(SECURE_BOOTLOADER_KEY): $(SECURE_BOOT_SIGNING_KEY) | check_python_dependencies
$(ESPSECUREPY) digest_private_key --keylen $(KEY_DIGEST_LEN) -k $< $@
else
$(SECURE_BOOTLOADER_KEY):
@echo "No pre-generated key for a reflashable secure bootloader is available, due to signing configuration."
@echo "To generate one, you can use this command:"
@echo "espsecure.py generate_flash_encryption_key $@"
@echo "then re-run make."
exit 1
endif
bootloader: $(BOOTLOADER_DIGEST_BIN)
@echo $(SEPARATOR)
@echo "Bootloader built and secure digest generated. First time flash command is:"
@echo "$(ESPEFUSEPY) burn_key secure_boot $(SECURE_BOOTLOADER_KEY)"
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
@echo $(SEPARATOR)
@echo "To reflash the bootloader after initial flash:"
@echo "$(ESPTOOLPY_WRITE_FLASH) 0x0 $(BOOTLOADER_DIGEST_BIN)"
@echo $(SEPARATOR)
@echo "* After first boot, only re-flashes of this kind (with same key) will be accepted."
@echo "* Not recommended to re-use the same secure boot keyfile on multiple production devices."
$(BOOTLOADER_DIGEST_BIN): $(BOOTLOADER_BIN) $(SECURE_BOOTLOADER_KEY) | check_python_dependencies
@echo "DIGEST $(notdir $@)"
$(ESPSECUREPY) digest_secure_bootloader -k $(SECURE_BOOTLOADER_KEY) -o $@ $<
else ifdef CONFIG_SECURE_BOOT_V2_ENABLED
BOOTLOADER_SIGNED_BIN := $(BOOTLOADER_BUILD_DIR)/bootloader-signed.bin
ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
bootloader: $(BOOTLOADER_BIN) $(SDKCONFIG_MAKEFILE) | check_python_dependencies
$(ESPSECUREPY) sign_data --keyfile $(SECURE_BOOT_SIGNING_KEY) --version 2 \
-o $(BOOTLOADER_SIGNED_BIN) $(BOOTLOADER_BIN)
else
bootloader: $(BOOTLOADER_BIN) $(SDKCONFIG_MAKEFILE) | check_python_dependencies
@echo "Bootloader not signed. Sign the bootloader before flashing."
@echo "To sign the bootloader, you can use this command:"
@echo "espsecure.py sign_data --keyfile SECURE_BOOT_SIGNING_KEY --version 2 $(BOOTLOADER_BIN)"
endif
@echo $(SEPARATOR)
@echo "Use the following command to flash the bootloader:"
ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $(BOOTLOADER_SIGNED_BIN)"
else
@echo "$(ESPTOOLPY_WRITE_FLASH) $(BOOTLOADER_OFFSET) $(BOOTLOADER_BIN)"
endif
@echo $(SEPARATOR)
else # CONFIG_SECURE_BOOT && !CONFIG_SECURE_BOOTLOADER_REFLASHABLE \
&& !CONFIG_SECURE_BOOTLOADER_ONE_TIME_FLASH && !CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME
bootloader:
@echo "Invalid bootloader target: bad sdkconfig?"
@exit 1
endif
ifndef CONFIG_SECURE_BOOT
# don't build bootloader by default if secure boot is enabled
all_binaries: $(BOOTLOADER_BIN)
endif
bootloader-clean: $(SDKCONFIG_MAKEFILE)
$(BOOTLOADER_MAKE) app-clean
ifdef CONFIG_SECURE_BOOTLOADER_REFLASHABLE
rm -f $(SECURE_BOOTLOADER_KEY) $(BOOTLOADER_DIGEST_BIN)
endif
ifdef CONFIG_SECURE_SIGNED_APPS_RSA_SCHEME
ifdef CONFIG_SECURE_BOOT_BUILD_SIGNED_BINARIES
rm -f $(BOOTLOADER_SIGNED_BIN)
endif
endif