kopia lustrzana https://github.com/espressif/esp-idf
a908174c06
the binary size check in example test was removed long time ago. Now we have updated ttfw_idf to raise exception when performance standard is not found. These fake performance check will be regarded as error. Remove them now. |
||
|---|---|---|
| .. | ||
| main | ||
| CMakeLists.txt | ||
| Makefile | ||
| README.md | ||
| asio_udp_server_test.py | ||
| sdkconfig.defaults | ||
README.md
Asio UDP echo server example
Simple Asio UDP echo server using WiFi STA or Ethernet.
Example workflow
- Wi-Fi or Ethernet connection is established, and IP address is obtained.
- Asio UDP server is started on port number defined through the project configuration
- Server receives and echoes back messages transmitted from client
Running the example
- Open the project configuration menu (
idf.py menuconfig) to configure Wi-Fi or Ethernet. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details. - Set server port number in menuconfig, "Example configuration".
- Run
idf.py -p PORT flash monitorto build and upload the example to your board and connect to it's serial terminal. - Wait for the board to connect to WiFi or Ethernet (note the IP address).
- You can now send a UDP message and check it is repeated, for example using netcat
nc -u IP PORT.
See the README.md file in the upper level 'examples' directory for more information about examples.