kopia lustrzana https://github.com/espressif/esp-idf
535 wiersze
25 KiB
Plaintext
535 wiersze
25 KiB
Plaintext
menu "Driver Configurations"
|
|
|
|
menu "Legacy ADC Configuration"
|
|
|
|
config ADC_DISABLE_DAC
|
|
depends on SOC_DAC_SUPPORTED
|
|
bool "Disable DAC when ADC2 is used on GPIO 25 and 26"
|
|
default y
|
|
help
|
|
If this is set, the ADC2 driver will disable the output of the DAC corresponding to the specified
|
|
channel. This is the default value.
|
|
|
|
For testing, disable this option so that we can measure the output of DAC by internal ADC.
|
|
|
|
config ADC_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy adc driver (driver/adc.h).
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
menu "Legacy ADC Calibration Configuration"
|
|
|
|
config ADC_CAL_EFUSE_TP_ENABLE
|
|
depends on IDF_TARGET_ESP32
|
|
bool "Use Two Point Values"
|
|
default "y"
|
|
help
|
|
Some ESP32s have Two Point calibration values burned into eFuse BLOCK3.
|
|
This option will allow the ADC calibration component to characterize the
|
|
ADC-Voltage curve using Two Point values if they are available.
|
|
|
|
config ADC_CAL_EFUSE_VREF_ENABLE
|
|
depends on IDF_TARGET_ESP32
|
|
bool "Use eFuse Vref"
|
|
default "y"
|
|
help
|
|
Some ESP32s have Vref burned into eFuse BLOCK0. This option will allow
|
|
the ADC calibration component to characterize the ADC-Voltage curve using
|
|
eFuse Vref if it is available.
|
|
|
|
config ADC_CAL_LUT_ENABLE
|
|
depends on IDF_TARGET_ESP32
|
|
bool "Use Lookup Tables"
|
|
default "y"
|
|
help
|
|
This option will allow the ADC calibration component to use Lookup Tables
|
|
to correct for non-linear behavior in 11db attenuation. Other attenuations
|
|
do not exhibit non-linear behavior hence will not be affected by this option.
|
|
|
|
config ADC_CALI_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy adc calibration
|
|
driver (esp_adc_cal.h).
|
|
If you want to continue using the legacy driver, and don't want to see related
|
|
deprecation warnings, you can enable this option.
|
|
|
|
endmenu
|
|
|
|
endmenu # ADC Configuration
|
|
|
|
menu "SPI Configuration"
|
|
|
|
config SPI_MASTER_IN_IRAM
|
|
bool "Place transmitting functions of SPI master into IRAM"
|
|
default n
|
|
depends on !FREERTOS_PLACE_FUNCTIONS_INTO_FLASH
|
|
select SPI_MASTER_ISR_IN_IRAM
|
|
help
|
|
Normally only the ISR of SPI master is placed in the IRAM, so that it
|
|
can work without the flash when interrupt is triggered.
|
|
For other functions, there's some possibility that the flash cache
|
|
miss when running inside and out of SPI functions, which may increase
|
|
the interval of SPI transactions.
|
|
Enable this to put ``queue_trans``, ``get_trans_result`` and
|
|
``transmit`` functions into the IRAM to avoid possible cache miss.
|
|
|
|
This configuration won't be available if `CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH` is enabled.
|
|
|
|
During unit test, this is enabled to measure the ideal case of api.
|
|
|
|
config SPI_MASTER_ISR_IN_IRAM
|
|
bool "Place SPI master ISR function into IRAM"
|
|
default y
|
|
select PERIPH_CTRL_FUNC_IN_IRAM
|
|
help
|
|
Place the SPI master ISR in to IRAM to avoid possible cache miss.
|
|
|
|
Also you can forbid the ISR being disabled during flash writing
|
|
access, by add ESP_INTR_FLAG_IRAM when initializing the driver.
|
|
|
|
config SPI_SLAVE_IN_IRAM
|
|
bool "Place transmitting functions of SPI slave into IRAM"
|
|
default n
|
|
select SPI_SLAVE_ISR_IN_IRAM
|
|
help
|
|
Normally only the ISR of SPI slave is placed in the IRAM, so that it
|
|
can work without the flash when interrupt is triggered.
|
|
For other functions, there's some possibility that the flash cache
|
|
miss when running inside and out of SPI functions, which may increase
|
|
the interval of SPI transactions.
|
|
Enable this to put ``queue_trans``, ``get_trans_result`` and
|
|
``transmit`` functions into the IRAM to avoid possible cache miss.
|
|
|
|
config SPI_SLAVE_ISR_IN_IRAM
|
|
bool "Place SPI slave ISR function into IRAM"
|
|
default y
|
|
select PERIPH_CTRL_FUNC_IN_IRAM
|
|
help
|
|
Place the SPI slave ISR in to IRAM to avoid possible cache miss.
|
|
|
|
Also you can forbid the ISR being disabled during flash writing
|
|
access, by add ESP_INTR_FLAG_IRAM when initializing the driver.
|
|
|
|
endmenu # SPI Configuration
|
|
|
|
menu "TWAI Configuration"
|
|
depends on SOC_TWAI_SUPPORTED
|
|
|
|
config TWAI_ISR_IN_IRAM
|
|
bool "Place TWAI ISR function into IRAM"
|
|
default n
|
|
select PERIPH_CTRL_FUNC_IN_IRAM if TWAI_ERRATA_FIX_RX_FRAME_INVALID || TWAI_ERRATA_FIX_RX_FIFO_CORRUPT
|
|
help
|
|
Place the TWAI ISR in to IRAM. This will allow the ISR to avoid
|
|
cache misses, and also be able to run whilst the cache is disabled
|
|
(such as when writing to SPI Flash).
|
|
Note that if this option is enabled:
|
|
- Users should also set the ESP_INTR_FLAG_IRAM in the driver
|
|
configuration structure when installing the driver (see docs for
|
|
specifics).
|
|
- Alert logging (i.e., setting of the TWAI_ALERT_AND_LOG flag)
|
|
will have no effect.
|
|
|
|
config TWAI_ERRATA_FIX_BUS_OFF_REC
|
|
bool "Add SW workaround for REC change during bus-off"
|
|
depends on IDF_TARGET_ESP32
|
|
default y
|
|
help
|
|
When the bus-off condition is reached, the REC should be reset to 0 and frozen (via LOM) by the
|
|
driver's ISR. However on the ESP32, there is an edge case where the REC will increase before the
|
|
driver's ISR can respond in time (e.g., due to the rapid occurrence of bus errors), thus causing the
|
|
REC to be non-zero after bus-off. A non-zero REC can prevent bus-off recovery as the bus-off recovery
|
|
condition is that both TEC and REC become 0. Enabling this option will add a workaround in the driver
|
|
to forcibly reset REC to zero on reaching bus-off.
|
|
|
|
config TWAI_ERRATA_FIX_TX_INTR_LOST
|
|
bool "Add SW workaround for TX interrupt lost errata"
|
|
depends on IDF_TARGET_ESP32
|
|
default y
|
|
help
|
|
On the ESP32, when a transmit interrupt occurs, and interrupt register is read on the same APB clock
|
|
cycle, the transmit interrupt could be lost. Enabling this option will add a workaround that checks the
|
|
transmit buffer status bit to recover any lost transmit interrupt.
|
|
|
|
config TWAI_ERRATA_FIX_RX_FRAME_INVALID
|
|
bool "Add SW workaround for invalid RX frame errata"
|
|
depends on IDF_TARGET_ESP32
|
|
default y
|
|
help
|
|
On the ESP32, when receiving a data or remote frame, if a bus error occurs in the data or CRC field,
|
|
the data of the next received frame could be invalid. Enabling this option will add a workaround that
|
|
will reset the peripheral on detection of this errata condition. Note that if a frame is transmitted on
|
|
the bus whilst the reset is ongoing, the message will not be receive by the peripheral sent on the bus
|
|
during the reset, the message will be lost.
|
|
|
|
config TWAI_ERRATA_FIX_RX_FIFO_CORRUPT
|
|
bool "Add SW workaround for RX FIFO corruption errata"
|
|
depends on IDF_TARGET_ESP32
|
|
default y
|
|
help
|
|
On the ESP32, when the RX FIFO overruns and the RX message counter maxes out at 64 messages, the entire
|
|
RX FIFO is no longer recoverable. Enabling this option will add a workaround that resets the peripheral
|
|
on detection of this errata condition. Note that if a frame is being sent on the bus during the reset
|
|
bus during the reset, the message will be lost.
|
|
|
|
config TWAI_ERRATA_FIX_LISTEN_ONLY_DOM
|
|
bool "Add SW workaround for listen only transmits dominant bit errata"
|
|
depends on IDF_TARGET_ESP32 || IDF_TARGET_ESP32S2 || IDF_TARGET_ESP32S3 || IDF_TARGET_ESP32C3
|
|
default y
|
|
help
|
|
When in the listen only mode, the TWAI controller must not influence the TWAI bus (i.e., must not send
|
|
any dominant bits). However, while in listen only mode on the ESP32/ESP32-S2/ESP32-S3/ESP32-C3, the
|
|
TWAI controller will still transmit dominant bits when it detects an error (i.e., as part of an active
|
|
error frame). Enabling this option will add a workaround that forces the TWAI controller into an error
|
|
passive state on initialization, thus preventing any dominant bits from being sent.
|
|
|
|
endmenu # TWAI Configuration
|
|
|
|
menu "Temperature sensor Configuration"
|
|
depends on SOC_TEMP_SENSOR_SUPPORTED
|
|
|
|
config TEMP_SENSOR_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy temperature sensor driver
|
|
(driver/temp_sensor.h). If you want to continue using the legacy driver,
|
|
and don't want to see related deprecation warnings, you can enable this option.
|
|
|
|
config TEMP_SENSOR_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for temperature sensor driver.
|
|
Note that, this option only controls the temperature sensor driver log, won't affect other drivers.
|
|
|
|
config TEMP_SENSOR_ISR_IRAM_SAFE
|
|
depends on SOC_TEMPERATURE_SENSOR_INTR_SUPPORT
|
|
bool "Temperature sensor ISR IRAM-Safe"
|
|
default n
|
|
help
|
|
Ensure the Temperature Sensor interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
endmenu # TEMP_SENSOR Configuration
|
|
|
|
menu "UART Configuration"
|
|
|
|
config UART_ISR_IN_IRAM
|
|
bool "Place UART ISR function into IRAM"
|
|
depends on !RINGBUF_PLACE_ISR_FUNCTIONS_INTO_FLASH
|
|
default n
|
|
help
|
|
If this option is not selected, UART interrupt will be disabled for a long time and
|
|
may cause data lost when doing spi flash operation.
|
|
|
|
endmenu # UART Configuration
|
|
|
|
menu "GPIO Configuration"
|
|
config GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL
|
|
bool "Support light sleep GPIO pullup/pulldown configuration for ESP32"
|
|
depends on IDF_TARGET_ESP32
|
|
help
|
|
This option is intended to fix the bug that ESP32 is not able to switch to configured
|
|
pullup/pulldown mode in sleep.
|
|
If this option is selected, chip will automatically emulate the behaviour of switching,
|
|
and about 450B of source codes would be placed into IRAM.
|
|
|
|
config GPIO_CTRL_FUNC_IN_IRAM
|
|
bool "Place GPIO control functions into IRAM"
|
|
default n
|
|
help
|
|
Place GPIO control functions (like intr_disable/set_level) into IRAM,
|
|
so that these functions can be IRAM-safe and able to be called in the other IRAM interrupt context.
|
|
endmenu # GPIO Configuration
|
|
|
|
menu "Sigma Delta Modulator Configuration"
|
|
depends on SOC_SDM_SUPPORTED
|
|
config SDM_CTRL_FUNC_IN_IRAM
|
|
bool "Place SDM control functions into IRAM"
|
|
default n
|
|
help
|
|
Place SDM control functions (like set_duty) into IRAM,
|
|
so that these functions can be IRAM-safe and able to be called in the other IRAM interrupt context.
|
|
Enabling this option can improve driver performance as well.
|
|
|
|
config SDM_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy sigma delta driver.
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
config SDM_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for SDM driver.
|
|
Note that, this option only controls the SDM driver log, won't affect other drivers.
|
|
endmenu # Sigma Delta Modulator Configuration
|
|
|
|
menu "Analog Comparator Configuration"
|
|
depends on SOC_ANA_CMPR_SUPPORTED
|
|
config ANA_CMPR_ISR_IRAM_SAFE
|
|
bool "Analog comparator ISR IRAM-Safe"
|
|
default n
|
|
help
|
|
Ensure the Analog Comparator interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
config ANA_CMPR_CTRL_FUNC_IN_IRAM
|
|
bool "Place Analog Comparator control functions into IRAM"
|
|
default n
|
|
help
|
|
Place Analog Comparator control functions (like ana_cmpr_set_internal_reference) into IRAM,
|
|
so that these functions can be IRAM-safe and able to be called in an IRAM interrupt context.
|
|
Enabling this option can improve driver performance as well.
|
|
|
|
config ANA_CMPR_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for Analog Comparator driver.
|
|
Note that, this option only controls the Analog Comparator driver log, won't affect other drivers.
|
|
endmenu # Analog Comparator Configuration
|
|
|
|
menu "GPTimer Configuration"
|
|
config GPTIMER_CTRL_FUNC_IN_IRAM
|
|
bool "Place GPTimer control functions into IRAM"
|
|
default n
|
|
help
|
|
Place GPTimer control functions (like start/stop) into IRAM,
|
|
so that these functions can be IRAM-safe and able to be called in the other IRAM interrupt context.
|
|
Enabling this option can improve driver performance as well.
|
|
|
|
config GPTIMER_ISR_IRAM_SAFE
|
|
bool "GPTimer ISR IRAM-Safe"
|
|
default n
|
|
help
|
|
Ensure the GPTimer interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
config GPTIMER_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy timer group driver (driver/timer.h).
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
config GPTIMER_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for GPTimer driver.
|
|
Note that, this option only controls the GPTimer driver log, won't affect other drivers.
|
|
endmenu # GPTimer Configuration
|
|
|
|
menu "PCNT Configuration"
|
|
depends on SOC_PCNT_SUPPORTED
|
|
config PCNT_CTRL_FUNC_IN_IRAM
|
|
bool "Place PCNT control functions into IRAM"
|
|
default n
|
|
help
|
|
Place PCNT control functions (like start/stop) into IRAM,
|
|
so that these functions can be IRAM-safe and able to be called in the other IRAM interrupt context.
|
|
Enabling this option can improve driver performance as well.
|
|
|
|
config PCNT_ISR_IRAM_SAFE
|
|
bool "PCNT ISR IRAM-Safe"
|
|
default n
|
|
help
|
|
Ensure the PCNT interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
config PCNT_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy PCNT driver (driver/pcnt.h).
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
config PCNT_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for PCNT driver.
|
|
Note that, this option only controls the PCNT driver log, won't affect other drivers.
|
|
endmenu # PCNT Configuration
|
|
|
|
menu "RMT Configuration"
|
|
depends on SOC_RMT_SUPPORTED
|
|
config RMT_ISR_IRAM_SAFE
|
|
bool "RMT ISR IRAM-Safe"
|
|
default n
|
|
select GDMA_ISR_IRAM_SAFE if SOC_RMT_SUPPORT_DMA # RMT basic functionality relies on GDMA callback
|
|
select GDMA_CTRL_FUNC_IN_IRAM if SOC_RMT_SUPPORT_DMA # RMT needs to restart the GDMA in the interrupt
|
|
help
|
|
Ensure the RMT interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
config RMT_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy rmt driver (driver/rmt.h).
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
config RMT_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for RMT driver.
|
|
Note that, this option only controls the RMT driver log, won't affect other drivers.
|
|
endmenu # RMT Configuration
|
|
|
|
menu "MCPWM Configuration"
|
|
depends on SOC_MCPWM_SUPPORTED
|
|
config MCPWM_ISR_IRAM_SAFE
|
|
bool "Place MCPWM ISR function into IRAM"
|
|
default n
|
|
help
|
|
This will ensure the MCPWM interrupt handle is IRAM-Safe, allow to avoid flash
|
|
cache misses, and also be able to run whilst the cache is disabled.
|
|
(e.g. SPI Flash write)
|
|
|
|
config MCPWM_CTRL_FUNC_IN_IRAM
|
|
bool "Place MCPWM control functions into IRAM"
|
|
default n
|
|
help
|
|
Place MCPWM control functions (like set_compare_value) into IRAM,
|
|
so that these functions can be IRAM-safe and able to be called in the other IRAM interrupt context.
|
|
Enabling this option can improve driver performance as well.
|
|
|
|
config MCPWM_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress leagcy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy MCPWM driver (driver/mcpwm.h).
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
config MCPWM_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for MCPWM driver.
|
|
Note that, this option only controls the MCPWM driver log, won't affect other drivers.
|
|
endmenu # MCPWM Configuration
|
|
|
|
menu "I2S Configuration"
|
|
depends on SOC_I2S_SUPPORTED
|
|
config I2S_ISR_IRAM_SAFE
|
|
bool "I2S ISR IRAM-Safe"
|
|
default n
|
|
help
|
|
Ensure the I2S interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
config I2S_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress leagcy driver deprecated warning"
|
|
default n
|
|
help
|
|
Enable this option will suppress the deprecation warnings of using APIs in legacy I2S driver.
|
|
|
|
config I2S_ENABLE_DEBUG_LOG
|
|
bool "Enable I2S debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for I2S driver.
|
|
Note that, this option only controls the I2S driver log, will not affect other drivers.
|
|
endmenu # I2S Configuration
|
|
|
|
menu "DAC Configuration"
|
|
depends on SOC_DAC_SUPPORTED
|
|
config DAC_CTRL_FUNC_IN_IRAM
|
|
bool "Place DAC control functions into IRAM"
|
|
default n
|
|
help
|
|
Place DAC control functions (e.g. 'dac_oneshot_output_voltage') into IRAM,
|
|
so that this function can be IRAM-safe and able to be called in the other IRAM interrupt context.
|
|
Enabling this option can improve driver performance as well.
|
|
|
|
config DAC_ISR_IRAM_SAFE
|
|
bool "DAC ISR IRAM-Safe"
|
|
default n
|
|
help
|
|
Ensure the DAC interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
config DAC_SUPPRESS_DEPRECATE_WARN
|
|
bool "Suppress legacy driver deprecated warning"
|
|
default n
|
|
help
|
|
Wether to suppress the deprecation warnings when using legacy DAC driver (driver/dac.h).
|
|
If you want to continue using the legacy driver, and don't want to see related deprecation warnings,
|
|
you can enable this option.
|
|
|
|
config DAC_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for DAC driver.
|
|
Note that, this option only controls the DAC driver log, won't affect other drivers.
|
|
|
|
config DAC_DMA_AUTO_16BIT_ALIGN
|
|
bool "Align the continuous data to 16 bit automatically"
|
|
depends on SOC_DAC_DMA_16BIT_ALIGN
|
|
default y
|
|
help
|
|
Whether to left shift the continuous data to align every bytes to 16 bits in the driver.
|
|
On ESP32, although the DAC resolution is only 8 bits,
|
|
the hardware requires 16 bits data in continuous mode.
|
|
By enabling this option, the driver will left shift 8 bits for the input data automatically.
|
|
Only disable this option when you decide to do this step by yourself.
|
|
Note that the driver will allocate a new piece of memory to save the converted data.
|
|
|
|
endmenu # DAC Configuration
|
|
|
|
menu "USB Serial/JTAG Configuration"
|
|
depends on SOC_USB_SERIAL_JTAG_SUPPORTED
|
|
config USJ_NO_AUTO_LS_ON_CONNECTION
|
|
bool "Don't enter the automatic light sleep when USB Serial/JTAG port is connected"
|
|
depends on PM_ENABLE && ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED && !SOC_USB_SERIAL_JTAG_SUPPORT_LIGHT_SLEEP
|
|
default n
|
|
help
|
|
If enabled, the chip will constantly monitor the connection status of the USB Serial/JTAG port. As long
|
|
as the USB Serial/JTAG is connected, a ESP_PM_NO_LIGHT_SLEEP power management lock will be acquired to
|
|
prevent the system from entering light sleep.
|
|
This option can be useful if serial monitoring is needed via USB Serial/JTAG while power management is
|
|
enabled, as the USB Serial/JTAG cannot work under light sleep and after waking up from light sleep.
|
|
Note. This option can only control the automatic Light-Sleep behavior. If esp_light_sleep_start() is
|
|
called manually from the program, enabling this option will not prevent light sleep entry even if the
|
|
USB Serial/JTAG is in use.
|
|
endmenu # USB Serial/JTAG Configuration
|
|
|
|
menu "Parallel IO Configuration"
|
|
depends on SOC_PARLIO_SUPPORTED
|
|
|
|
config PARLIO_ENABLE_DEBUG_LOG
|
|
bool "Enable debug log"
|
|
default n
|
|
help
|
|
Wether to enable the debug log message for parallel IO driver.
|
|
Note that, this option only controls the parallel IO driver log, won't affect other drivers.
|
|
|
|
config PARLIO_ISR_IRAM_SAFE
|
|
bool "Parallel IO ISR IRAM-Safe"
|
|
default n
|
|
select GDMA_CTRL_FUNC_IN_IRAM # the driver needs to start the GDMA in the interrupt
|
|
help
|
|
Ensure the Parallel IO interrupt is IRAM-Safe by allowing the interrupt handler to be
|
|
executable when the cache is disabled (e.g. SPI Flash write).
|
|
|
|
endmenu # Parallel IO Configuration
|
|
|
|
endmenu # Driver configurations
|