mirror
/
esp-idf
kopia lustrzana https://github.com/espressif/esp-idf
1
0
Forkuj 0
Kod Zgłoszenia Projekty Wydania Wiki Aktywność
esp-idf/examples/protocols/https_x509_bundle
Historia
Ivan Grokhotkov 6d87100a70
feat(examples): add local components via idf_component.yml 
Specifying all the dependencies (managed and local) in the manifest
makes it easier for users to see every component the example
depends on.
 		2023-09-19 10:38:24 +02:00
..
certs
…
main feat(examples): add local components via idf_component.yml 2023-09-19 10:38:24 +02:00
CMakeLists.txt feat(examples): add local components via idf_component.yml 2023-09-19 10:38:24 +02:00
README.md
…
pytest_https_x509_bundle.py
…
sdkconfig.ci
…
sdkconfig.ci.ssldyn
…
sdkconfig.defaults
…

README.md

Supported Targets ESP32 ESP32-C2 ESP32-C3 ESP32-C6 ESP32-H2 ESP32-S2 ESP32-S3

HTTPS x509 Bundle Example

This example shows how to use the ESP certificate bundle utility to embed a bundle of x509 certificates and use them to establish a simple HTTPS connection over a secure connection. The path of the certificates are specified using menuconfig.

See the README.md file in the upper level 'examples' directory for more information about examples.

Example workflow

  • ESP TLS is initialized with the certificate bundle option enabled.
  • The application loops through the given URLs, establishing a secure TLS connection to all of them, verifying the server certificate included.

Configure the project

  • Open the project configuration menu (idf.py menuconfig)
  • Configure Wi-Fi or Ethernet under "Example Connection Configuration" menu. See "Establishing Wi-Fi or Ethernet Connection" section in examples/protocols/README.md for more details.
  • If using a different folder than certs for storing certificates then update Custom Certificate Bundle Path under Component config - mbedTLS - Certificate Bundle

Build and Flash

Build the project and flash it to the board, then run monitor tool to view serial output:

idf.py -p PORT flash monitor

(To exit the serial monitor, type Ctrl-].)

See the Getting Started Guide for full steps to configure and use ESP-IDF to build projects.

Example Output

I (0) cpu_start: Starting scheduler on APP CPU.
I (491) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (4051) example_connect: Ethernet Link Up
I (5971) esp_netif_handlers: eth ip: 192.168.2.137, mask: 255.255.255.0, gw: 192.168.2.2
I (5971) example_connect: Connected to Ethernet
I (5971) example_connect: IPv4 address: 192.168.2.137
I (5971) example_connect: IPv6 address: fe80:0000:0000:0000:bedd:c2ff:fed4:a92b
I (5981) example: Connecting to 2 URLs
I (7100) esp-x509-crt-bundle: Certificate validated
I (8371) example: Connection established to https://www.howsmyssl.com/a/check
I (11730) esp-x509-crt-bundle: Certificate validated
I (11821) example: Connection established to https://espressif.com
I (12821) example: Completed 2 connections
I (12821) example: Starting over again...