esp-idf/components/spi_flash/esp_flash_spi_init.c

310 wiersze
10 KiB
C

// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#include "sdkconfig.h"
#include "esp_flash.h"
#include "memspi_host_driver.h"
#include "esp_flash_spi_init.h"
#include "driver/gpio.h"
#include "esp_rom_gpio.h"
#include "esp_rom_efuse.h"
#include "esp_log.h"
#include "esp_heap_caps.h"
#include "hal/spi_types.h"
#include "driver/spi_common_internal.h"
#include "hal/spi_flash_hal.h"
#include "hal/gpio_hal.h"
#include "esp_flash_internal.h"
#include "esp_rom_gpio.h"
#if CONFIG_IDF_TARGET_ESP32
#include "esp32/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32S2
#include "esp32s2/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/rom/spi_flash.h"
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/spi_flash.h"
#endif
__attribute__((unused)) static const char TAG[] = "spi_flash";
#ifdef CONFIG_ESPTOOLPY_FLASHFREQ_80M
#define DEFAULT_FLASH_SPEED ESP_FLASH_80MHZ
#elif defined CONFIG_ESPTOOLPY_FLASHFREQ_40M
#define DEFAULT_FLASH_SPEED ESP_FLASH_40MHZ
#elif defined CONFIG_ESPTOOLPY_FLASHFREQ_26M
#define DEFAULT_FLASH_SPEED ESP_FLASH_26MHZ
#elif defined CONFIG_ESPTOOLPY_FLASHFREQ_20M
#define DEFAULT_FLASH_SPEED ESP_FLASH_20MHZ
#else
#error Flash frequency not defined! Check the ``CONFIG_ESPTOOLPY_FLASHFREQ_*`` options.
#endif
#if defined(CONFIG_ESPTOOLPY_FLASHMODE_QIO)
#define DEFAULT_FLASH_MODE SPI_FLASH_QIO
#elif defined(CONFIG_ESPTOOLPY_FLASHMODE_QOUT)
#define DEFAULT_FLASH_MODE SPI_FLASH_QOUT
#elif defined(CONFIG_ESPTOOLPY_FLASHMODE_DIO)
#define DEFAULT_FLASH_MODE SPI_FLASH_DIO
#elif defined(CONFIG_ESPTOOLPY_FLASHMODE_DOUT)
#define DEFAULT_FLASH_MODE SPI_FLASH_DOUT
#else
#define DEFAULT_FLASH_MODE SPI_FLASH_FASTRD
#endif
//TODO: modify cs hold to meet requirements of all chips!!!
#if CONFIG_IDF_TARGET_ESP32
#define ESP_FLASH_HOST_CONFIG_DEFAULT() (memspi_host_config_t){ \
.host_id = SPI1_HOST,\
.speed = DEFAULT_FLASH_SPEED, \
.cs_num = 0, \
.iomux = false, \
.input_delay_ns = 0,\
}
#elif CONFIG_IDF_TARGET_ESP32S2
#define ESP_FLASH_HOST_CONFIG_DEFAULT() (memspi_host_config_t){ \
.host_id = SPI1_HOST,\
.speed = DEFAULT_FLASH_SPEED, \
.cs_num = 0, \
.iomux = true, \
.input_delay_ns = 0,\
}
#elif CONFIG_IDF_TARGET_ESP32S3
#include "esp32s3/rom/efuse.h"
#define ESP_FLASH_HOST_CONFIG_DEFAULT() (memspi_host_config_t){ \
.host_id = SPI1_HOST,\
.speed = DEFAULT_FLASH_SPEED, \
.cs_num = 0, \
.iomux = true, \
.input_delay_ns = 0,\
}
#elif CONFIG_IDF_TARGET_ESP32C3
#include "esp32c3/rom/efuse.h"
#if !CONFIG_SPI_FLASH_AUTO_SUSPEND
#define ESP_FLASH_HOST_CONFIG_DEFAULT() (memspi_host_config_t){ \
.host_id = SPI1_HOST,\
.speed = DEFAULT_FLASH_SPEED, \
.cs_num = 0, \
.iomux = true, \
.input_delay_ns = 0,\
}
#else
#define ESP_FLASH_HOST_CONFIG_DEFAULT() (memspi_host_config_t){ \
.host_id = SPI1_HOST,\
.speed = DEFAULT_FLASH_SPEED, \
.cs_num = 0, \
.iomux = true, \
.input_delay_ns = 0,\
.auto_sus_en = true,\
}
#endif //!CONFIG_SPI_FLASH_AUTO_SUSPEND
#endif
static IRAM_ATTR NOINLINE_ATTR void cs_initialize(esp_flash_t *chip, const esp_flash_spi_device_config_t *config, bool use_iomux, int cs_id)
{
//Not using spicommon_cs_initialize since we don't want to put the whole
//spi_periph_signal into the DRAM. Copy these data from flash before the
//cache disabling
int cs_io_num = config->cs_io_num;
int spics_in = spi_periph_signal[config->host_id].spics_in;
int spics_out = spi_periph_signal[config->host_id].spics_out[cs_id];
int spics_func = spi_periph_signal[config->host_id].func;
uint32_t iomux_reg = GPIO_PIN_MUX_REG[cs_io_num];
//To avoid the panic caused by flash data line conflicts during cs line
//initialization, disable the cache temporarily
chip->os_func->start(chip->os_func_data);
PIN_INPUT_ENABLE(iomux_reg);
if (use_iomux) {
gpio_hal_iomux_func_sel(iomux_reg, spics_func);
} else {
#if SOC_GPIO_PIN_COUNT <= 32
GPIO.enable_w1ts.val = (0x1 << cs_io_num);
#else
if (cs_io_num < 32) {
GPIO.enable_w1ts = (0x1 << cs_io_num);
} else {
GPIO.enable1_w1ts.data = (0x1 << (cs_io_num - 32));
}
#endif
GPIO.pin[cs_io_num].pad_driver = 0;
esp_rom_gpio_connect_out_signal(cs_io_num, spics_out, false, false);
if (cs_id == 0) {
esp_rom_gpio_connect_in_signal(cs_io_num, spics_in, false);
}
gpio_hal_iomux_func_sel(iomux_reg, PIN_FUNC_GPIO);
}
chip->os_func->end(chip->os_func_data);
}
esp_err_t spi_bus_add_flash_device(esp_flash_t **out_chip, const esp_flash_spi_device_config_t *config)
{
if (out_chip == NULL) {
return ESP_ERR_INVALID_ARG;
}
if (!GPIO_IS_VALID_OUTPUT_GPIO(config->cs_io_num)) {
return ESP_ERR_INVALID_ARG;
}
esp_flash_t *chip = NULL;
memspi_host_inst_t *host = NULL;
esp_err_t ret = ESP_OK;
uint32_t caps = MALLOC_CAP_DEFAULT;
if (config->host_id == SPI1_HOST) caps = MALLOC_CAP_INTERNAL | MALLOC_CAP_8BIT;
chip = (esp_flash_t*)heap_caps_malloc(sizeof(esp_flash_t), caps);
if (!chip) {
ret = ESP_ERR_NO_MEM;
goto fail;
}
host = (memspi_host_inst_t*)heap_caps_malloc(sizeof(memspi_host_inst_t), caps);
*chip = (esp_flash_t) {
.read_mode = config->io_mode,
.host = (spi_flash_host_inst_t*)host,
};
if (!host) {
ret = ESP_ERR_NO_MEM;
goto fail;
}
int dev_id = -1;
esp_err_t err = esp_flash_init_os_functions(chip, config->host_id, &dev_id);
if (err == ESP_ERR_NOT_SUPPORTED) {
ESP_LOGE(TAG, "Init os functions failed! No free CS.");
} else if (err == ESP_ERR_INVALID_ARG) {
ESP_LOGE(TAG, "Init os functions failed! Bus lock not initialized (check CONFIG_SPI_FLASH_SHARE_SPI1_BUS).");
}
if (err != ESP_OK) {
ret = err;
goto fail;
}
// When `CONFIG_SPI_FLASH_SHARE_SPI1_BUS` is not enabled on SPI1 bus, the
// `esp_flash_init_os_functions` will not be able to assign a new device ID. In this case, we
// use the `cs_id` in the config structure.
if (dev_id == -1 && config->host_id == SPI1_HOST) {
dev_id = config->cs_id;
}
assert(dev_id < SOC_SPI_PERIPH_CS_NUM(config->host_id) && dev_id >= 0);
bool use_iomux = spicommon_bus_using_iomux(config->host_id);
memspi_host_config_t host_cfg = {
.host_id = config->host_id,
.cs_num = dev_id,
.iomux = use_iomux,
.input_delay_ns = config->input_delay_ns,
.speed = config->speed,
};
err = memspi_host_init_pointers(host, &host_cfg);
if (err != ESP_OK) {
ret = err;
goto fail;
}
// The cs_id inside `config` is deprecated, use the `dev_id` provided by the bus lock instead.
cs_initialize(chip, config, use_iomux, dev_id);
*out_chip = chip;
return ret;
fail:
// The memory allocated are free'd in the `spi_bus_remove_flash_device`.
spi_bus_remove_flash_device(chip);
return ret;
}
esp_err_t spi_bus_remove_flash_device(esp_flash_t *chip)
{
if (chip==NULL) {
return ESP_ERR_INVALID_ARG;
}
esp_flash_deinit_os_functions(chip);
free(chip->host);
free(chip);
return ESP_OK;
}
/* The default (ie initial boot) no-OS ROM esp_flash_os_functions_t */
extern const esp_flash_os_functions_t esp_flash_noos_functions;
/* This pointer is defined in ROM and extern-ed on targets where CONFIG_SPI_FLASH_ROM_IMPL = y*/
#if !CONFIG_SPI_FLASH_ROM_IMPL
esp_flash_t *esp_flash_default_chip = NULL;
#endif
#ifndef CONFIG_SPI_FLASH_USE_LEGACY_IMPL
static DRAM_ATTR memspi_host_inst_t esp_flash_default_host;
static DRAM_ATTR esp_flash_t default_chip = {
.read_mode = DEFAULT_FLASH_MODE,
.host = (spi_flash_host_inst_t*)&esp_flash_default_host,
.os_func = &esp_flash_noos_functions,
};
extern esp_err_t esp_flash_suspend_cmd_init(esp_flash_t* chip);
esp_err_t esp_flash_init_default_chip(void)
{
const esp_rom_spiflash_chip_t *legacy_chip = &g_rom_flashchip;
memspi_host_config_t cfg = ESP_FLASH_HOST_CONFIG_DEFAULT();
#if !CONFIG_IDF_TARGET_ESP32
// For esp32s2 spi IOs are configured as from IO MUX by default
cfg.iomux = esp_rom_efuse_get_flash_gpio_info() == 0 ? true : false;
#endif
//the host is already initialized, only do init for the data and load it to the host
esp_err_t err = memspi_host_init_pointers(&esp_flash_default_host, &cfg);
if (err != ESP_OK) {
return err;
}
// ROM TODO: account for non-standard default pins in efuse
// ROM TODO: to account for chips which are slow to power on, maybe keep probing in a loop here
err = esp_flash_init(&default_chip);
if (err != ESP_OK) {
return err;
}
if (default_chip.size < legacy_chip->chip_size) {
ESP_EARLY_LOGE(TAG, "Detected size(%dk) smaller than the size in the binary image header(%dk). Probe failed.", default_chip.size/1024, legacy_chip->chip_size/1024);
return ESP_ERR_FLASH_SIZE_NOT_MATCH;
}
if (default_chip.size > legacy_chip->chip_size) {
ESP_EARLY_LOGW(TAG, "Detected size(%dk) larger than the size in the binary image header(%dk). Using the size in the binary image header.", default_chip.size/1024, legacy_chip->chip_size/1024);
}
default_chip.size = legacy_chip->chip_size;
esp_flash_default_chip = &default_chip;
#ifdef CONFIG_SPI_FLASH_AUTO_SUSPEND
err = esp_flash_suspend_cmd_init(&default_chip);
if (err != ESP_OK) {
return err;
}
#endif
return ESP_OK;
}
esp_err_t esp_flash_app_init(void)
{
esp_err_t err = ESP_OK;
#if CONFIG_SPI_FLASH_SHARE_SPI1_BUS
err = esp_flash_init_main_bus_lock();
if (err != ESP_OK) return err;
#endif
err = esp_flash_app_enable_os_functions(&default_chip);
return err;
}
#endif //!CONFIG_SPI_FLASH_USE_LEGACY_IMPL