Historia

Shu Chen c09633d41b openthread: enrich documentation for openthread examples		2021-09-15 15:44:07 +08:00
..
main	openthread: enrich documentation for openthread examples	2021-09-15 15:44:07 +08:00
CMakeLists.txt	openthread: add ot_rcp example	2021-08-25 18:04:45 +08:00
Makefile	openthread: add ot_rcp example	2021-08-25 18:04:45 +08:00
README.md	openthread: refine ot_rcp example documentation and APIs	2021-08-26 16:10:16 +08:00
partitions.csv	openthread: add ot_rcp example	2021-08-25 18:04:45 +08:00
sdkconfig.defaults	openthread: add ot_rcp example	2021-08-25 18:04:45 +08:00

README.md

Supported Targets	ESP32-H2

OpenThread Radio Co-Processor (RCP) Example

This example demonstrates an OpenThread Radio Co-Processor.

OpenThread RCP doesn't function alone, it needs to work together with a Host and this example covers two common user scenarios:

Work with a Host Processor to perform a Thread Border Router.
Work as a Thread Sniffer.

How to use example

Hardware Required

To run this example, an ESP32-H2 board is required.

Configure the project

The default communication interface is port 0 of ESP32-H2 UART running at 115200 baud, change the configuration in esp_ot_config.h if you want to use another interface or need different communication parameters.

Build and Flash

Build the project and flash it to the board:

idf.py -p <PORT> build flash

Now you'll get an OpenThread RCP, you can try the following use cases:

Thread Border Router

Please refer to ot_br example for the setup steps.

Thread Sniffer

Please refer to Thread Sniffer for the detailed instructions.